Redmond

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Our team tackles secure communication between critical satellite functions including power management, hardware interfaces, command & telemetry, and autonomous control. We are looking for an outstanding Software Engineer to participate in all phases of software development from requirements through implementation and test to operations.As an Embedded Firmware Engineer you will engage with an experienced cross-disciplinary staff to conceive and design solutions. You must be responsive, flexible, and able to succeed within an open, collaborative peer environment.You will participate in the design, integration and improvement of the SW. This includes designing and implementing a wide range of low-level embedded software on our hardware services, including device drivers, Linux kernel modules, porting existing software to new embedded systems, and other low level programming activities. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities* Develop embedded software in C++ and Rust * Write software to interact with microcontrollers* Design and develop secure software* Collaborate with cross-functional teams to define software requirements and architectureA day in the lifeCome work at Amazon! We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design. Come help us solve the difficult and rewarding development challenges in building highly reliable, power efficient and low-cost satellite avionics!About the teamOur team tackles secure communication between critical satellite functions including power management, hardware interfaces, command & telemetry, and autonomous control. We are looking for an outstanding software engineer to participate in all phases of software development from requirements through implementation and test to operations.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!Key job responsibilitiesIn this role, you will be responsible for the development and integration of advanced phased array system into products, including: - Work with a cross-functional team, define antenna requirements - Define antenna concepts and requirements during product definition - Develop tools for antenna performance analysis in larger systems - Build and test active phased array prototypes and front-end circuits Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Senior Antenna Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative phased array antennas. You will work closely with Project Kuiper’s various sub-teams and engage third party suppliers in order to drive key aspects of product definition, design, optimization, implementation and test.BASIC QUALIFICATIONS- BS degree in EE with some RF and antenna coursework or research, or equivalent experience- 7+ years of experience of research and/or development in antenna design- 3+ years of experience in programming in Matlab, Python or C++- Experience with one of the mainstream antenna simulation tools (CST, HFSS,…) ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilitiesThe Kuiper team is looking for a senior global category sourcing leader to support business and engineering stakeholders in selecting, developing and managing business relationships with critical technology and service suppliers, and others as needed to execute on Kuiper objectives. The ideal candidate will have a successful track record developing and executing strategy, negotiating master agreements and statements of work, and managing supplier performance. Experience working in new and ambiguous environments while solving complex problems with a broad range of cross functional stakeholders will be an advantage. Specifically, in this role you will: - Use industry and relevant data analysis, create and execute strategic sourcing plans for a technology, business unit, department, or project to help internal customers meet their goals - Work with a range of stakeholders including business leaders, engineering leaders, legal, program management, and supply chain to negotiate a variety of agreements and contracts including term sheets, MOUs, NDAs, SOWs, development agreements, component purchase agreements and others - Analyze industry trends and evolving technology to proactively identify opportunities to reduce cost, minimize risk, protect continuity of supply, and industry developments that benefit Amazon’s customers - Influence suppliers' processes, technology decisions, and policies in ways that are mutually beneficial and sustainable for both organizations - Prioritize projects and activities to deliver maximum cost reductions and reliable on-time delivery- Manage cross-functional projects against plans and objectives to meet commitments and goals - Drive financial modeling of large and complex deals - Evaluate and monitor financial health of critical suppliers - Effectively lead cross-functional meetings with clear document writing, agenda creation, note capture and follow-up activity coordination A day in the lifePROJECT KUIPER is a great fit for you if:- You enjoy working with a fun team that prides itself on a great work environment with an inclusive group of people that are working together towards a common goal.- You are sensitive to customer needs and interested in working on a service that will be used, directly and indirectly, by millions of customers and has a meaningful impact to their functions and interactions.- You’d like to be directly responsible for solving real customer problems.- You are a passionate learner and are motivated to take on new challenges.- You want to have fun; surround yourself with a fun highly talented team that likes to solve complex problems, but also enjoy work life balance.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious and earn trust.Mentorship & Career GrowthOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge sharing and mentorship. We care about your career growth and strive to assign projects based on what will help each team member develop into a better-rounded professional and enable them to take on more complex tasks in the future.Innovation is part of our DNA! Our goal is to be Earth's most customer-centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space based systems design and wireless systems.BASIC QUALIFICATIONS•4+ years of relevant experience in industry and/or academia.•4+ years of experience in sourcing or related disciplines specific to building up global infrastructure and managing service providers in construction, security and maintenance. •4+ years of direct experience in technology procurement, commodity management, contract negotiation, category sourcing or related supply chain experience. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Our team focuses on building enterprise and consumer grade Customer Terminals, for use by our customers to access internet through the Project Kuiper.We are looking for an embedded Software Development Engineer to own, design and develop Customer Terminal system software for Project Kuiper, using embedded Linux, and custom Silicon. Kuiper is breaking new ground with every device we design, and you will be an integral part of bringing this family of products to customers.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesDevelop embedded software for Customer Terminal devices within the Project Kuiper system.Participate in all phases of SDLC including requirements gathering, design, code, test, and code/test coverage.Developing embedded software in assembly, C, C++, Rust or other languagesHave in-depth knowledge with real-time embedded software philosophies and practicesHave expertise with Linux and RTOSReview schematics, logic analyzer, and embedded software (bare-metal) trouble-shooting techniquesFamiliarity with cryptography, threat modeling, and secure SDLC, TrustZone, bootloader.Develop embedded software in C, C++, Rust, or other modern languages.Write drivers for peripherals and interfaces such as I2C/I3C, SPI, UART, GPIO etc.Work closely with hardware teams to support board bring-up and integration testing.A day in the lifeYou will lead a team of embedded SDEs responsible for leading the design of embedded software used in the Project Kuiper customer terminal products. You will work in a collaborative environment with teams inside and outside of Amazon. You will mentor a team of software engineers on best practices while you guide your software designs from requirements gathering through mass production.About the teamThe Kuiper Customer Terminal Software Team supports the devices that connect our customers to the Kuiper network. We provide software for both applications and the underlying Linux system. We work hand in hand with hardware, product and operations teams to deliver a great experience for our customers.BASIC QUALIFICATIONS- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Our team focuses on building enterprise and consumer grade Customer Terminals, for use by our customers to access internet through the Project Kuiper.We are looking for an embedded Software Development Engineer to own, design and develop Customer Terminal system software for Project Kuiper, using embedded Linux, and custom Silicon. Kuiper is breaking new ground with every device we design, and you will be an integral part of bringing this family of products to customers.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesDevelop embedded software for Customer Terminal devices within the Project Kuiper system.Participate in all phases of SDLC including requirements gathering, design, code, test, and code/test coverage.Developing embedded software in assembly, C, C++, Rust or other languagesHave in-depth knowledge with real-time embedded software philosophies and practicesHave expertise with Linux and RTOSReview schematics, logic analyzer, and embedded software (bare-metal) trouble-shooting techniquesFamiliarity with cryptography, threat modeling, and secure SDLC, TrustZone, bootloader.Develop embedded software in C, C++, Rust, or other modern languages.Write drivers for peripherals and interfaces such as I2C/I3C, SPI, UART, GPIO etc.Work closely with hardware teams to support board bring-up and integration testing.A day in the lifeYou will be on a team of embedded SDEs responsible for leading the design of embedded software used in the Project Kuiper customer terminal products. You will work in a collaborative environment with teams inside and outside of Amazon. You will help mentor a team of software engineers on best practices while you help guide software designs from requirements gathering through mass production.About the teamThe Kuiper Customer Terminal Software Team supports the devices that connect our customers to the Kuiper network. We provide software for both applications and the underlying Linux systems. We work hand in hand with hardware, product and operations teams to deliver a great experience for our customers.BASIC QUALIFICATIONS- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Amazon seeks a Senior Electromagnetic Interference and Compatibility (EMI and EMC) Engineer to join the Antenna Team. As a Kuiper Sr. EMC/EMI engineer you will develop requirements, review designs and build test capability for complex payload subsystems for low-earth-orbit satellites. In this role you will influence decision makers on the process, procedures and necessary tests required to achieve EMI/EMC qualified hardware. You will execute tests and provide leadership for other engineers and technicians during test campaigns. The key responsibilities of the role are:• Define requirements for testing and qualifying subsystems• Perform analysis of radiated emissions and susceptibility (RE/RS)• Develop models for interference and shielding issues to mitigate and control emissions and susceptibility.• Work with electronic component design teams to communicate requirements related to electromagnetic environments such as shielding, grounding, bonding and isolation• Work with subsystem design owners on EMI related challenges • Define and coordinate EMI and EMC testing for a satellite and its subsystems• Coordinate requirements and validation with Launch Providers’ EMI and EMC teams.• Develop and maintain EMI/EMC test labs and equipment and support execution of EMI/EMC testing for a satellite and its subsystems• Identify emission and susceptibility non-conformance. Debug all failures to root-cause and provide manufacturable solutions.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor’s degree in Electrical Engineering, Physics, or equivalent degree, or equivalent experience- 7+ years of experience in a hardware development role focusing on electromagnetic environments or EMI/EMC.- 5+ years of experience with defining and conducting EMI/EMC testing for electronic components and systems. ...

Are you ready to get in on the ground floor of Amazon’s long-term initiative to design, launch and maintain a constellation of Low Earth Orbit satellites to provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world? It’s Day 1 for Amazon’s next billion dollar business and we are looking for an entrepreneurial minded Senior Financial Analyst to work in a start-up environment who is passionate about technology, is interested in analyzing new business opportunities, who thinks/acts globally, and has the ability to create and implement solutions to business questions.The successful candidate will be entrepreneurial by nature, a strategic thinker, analytical in approach, have a demonstrated ability to develop financial models that provide intelligence for business decisions. This role requires a self-starter with superb business modeling skills, a keen attention to detail, and ability to work in a fast-paced environment. The candidate must have the aptitude to incorporate new approaches and methodologies (including statistical concepts) while dealing with big data and be able to develop and define key business questions and to build data sets that answer those questions. Key job responsibilities• Perform analysis of revenue and costs, evaluate financial improvement opportunities and build controls to assure revenue and cost within end-to-end processes.• Responsible for BA participation in Enterprise projects through feasibility to project/product implementation and post launch validation.• Lead and/or support audit/control development, configuration, validation, operations, discrepancy review, ROI creation, and reporting are successfully led to meet requirements, timelines, and budgets as defined by BA leadership.• Process improvements and new opportunities are identified and prioritized by working collaboratively with business partners.• Manage and develop revenue assurance audits and controls to oversee revenue and cost flows• Work with business teams to review and improve existing processes• Extract and analyze revenue and cost data to detect leaks and opportunities to improve margins• Review upcoming marketing offers to determine financial risks• Perform post-mortem analysis of launched offers to verify implementation accuracy and validate business case assumptions and outcomes• Document and present audit results, analytical findings and proposed solutions• Foster relationships with key cross-functional partners and internal stakeholdersBASIC QUALIFICATIONS- Bachelor's degree in finance, accounting or related field- 3+ years of finance or a related analytical field experience- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. ...

Are you ready to get in on the ground floor of Amazon’s long-term initiative to design, launch and maintain a constellation of Low Earth Orbit satellites to provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world?It’s Day 1 for Amazon’s next billion dollar business and we are looking for an entrepreneurial minded Finance Manager to work in a start-up environment who is passionate about technology, manufacturing and FP&A, who thinks/acts globally, and has the ability to create and implement solutions, processes and controls. Project Kuiper seeks a Senior Financial Analyst to support Project Kuiper's Launch Operations team. This position will partner with business and finance leaders to design program strategy through thoughtful analysis, develop key financial processes, and support automation initiatives. The successful candidate will need to be strategic, analytical, and have the demonstrated ability to work effectively with cross-functional teams. A typical day in this role provides an opportunity to improve and create new measures for business effectiveness, innovate creative solutions utilizing large scale data mining tools, and identify high priority projects to maximize results for key stakeholders.Key job responsibilities- Create effective business partnerships, manages competing priorities, and provides investment guidance based on data analysis during unexpected events.- Present financial summaries and business insights to Senior Management (Business and Finance).- Develop and implement long range business planning.- Develop financial models for new business concepts and resulting financial impact to help drive data driven decision making.- Build out and enhance P&L models for new and existing businesses, develop business insights and KPI dashboards, and lead ad hoc analyses.- Work with big data and transforming it into insights and information.- Lead automation efforts of critical processes.- Identify opportunities to resolve defects proactively. Improves, scales, or simplifies finance tools across teams and organizations.- Participate in Finance initiatives, including but not limited to process improvements, ad hoc analyses, and preparation of periodic reporting activities.BASIC QUALIFICATIONS- 3+ years of tax, finance or a related analytical field experience- Bachelor's degree- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. ...

Are you ready to get in on the ground floor of Amazon’s long-term initiative to design, launch and maintain a constellation of Low Earth Orbit satellites to provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world?It’s Day 1 for Amazon’s next billion dollar business and we are looking for an entrepreneurial minded Finance Manager to work in a start-up environment who is passionate about technology, manufacturing and FP&A, who thinks/acts globally, and has the ability to create and implement solutions, processes and controls. Project Kuiper seeks a Senior Financial Analyst to support the growing FP&A team and build new financial analysis and reporting. This is an exciting opportunity to shape financial processes from the ground up in a new, high-growth team.The ideal candidate will be strategic, analytical, and have a demonstrated ability to work effectively with cross-functional teams. This role requires regular interaction with senior executives, various business units, and multiple stakeholders across Amazon, requiring strong interpersonal and communication skills.Key job responsibilities - Develop and implement financial analysis and reporting - Create and automate monthly financial reports for senior leadership - Build scalable financial models and processes to support the team's growth - Provide strategic insights to drive data-driven decision making - Build out and enhance P&L models for new and existing businesses, develop business insights and KPI dashboards, and lead ad hoc analyses - Work with big data, transforming it into insights and information - Identify opportunities to proactively resolve defects; improve, scale, or simplify finance tools across teams and organizations - Participate in Finance initiatives, including but not limited to process improvements, ad hoc analyses, and preparation of periodic reporting activitiesBASIC QUALIFICATIONS- 3+ years of tax, finance or a related analytical field experience- Bachelor's degree in finance, accounting or related field- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. ...

Would you like to join a team that is building industry changing technology? Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Project Kuiper is looking for an innovative, results-driven Sr HR Business Partner to support its Hardware, Silicon, and TPM organizations. This HRBP will partner with Executives (L8+) to define and drive their holistic talent strategies and initiatives, while providing programmatic HR support in partnership with various HR related centers of excellence (COE) across Amazon. This is both a strategic and hands on role.You will focus on organizational design and effectiveness, workforce planning, talent management, leadership/executive development, and employee development and engagement. To be successful in this role, you will work backwards from the business strategy to define the organizations HR strategy and priorities. You’ll help business leaders accelerate and derisk business growth through data-driven and innovative recommendations for new initiatives, as well as iterating on current programs to improve team performance, retention and Kuiper's employee experience. Your strong business acumen, executive coaching skills, excellent communication skills, and planning/project management skills are key to success as you help leaders navigate tremendous growth and change.Key job responsibilities· Partner with senior leaders and their leadership teams to develop the talent strategy needed to support Kuiper's tremendous growth, and to build an inclusive work environment where employees can thrive and grow.· Define and drive mechanisms to inspect, assess and identify opportunities to continuously improve and maintain organization health across the employee lifecycle.· Work with key partners across Amazon's HR ecosystem to drive programs and improvements in various core areas including talent management, leadership development, organizational design, talent acquisition, and DEI.· Partner with senior leaders on both immediate and long term planning for organizational design, workforce planning, succession planning, and skills assessment and development.· Partner with the talent acquisition team to build systemic and scalable recruiting programs to create a sustainable pipeline of talent. BASIC QUALIFICATIONS· Bachelor’s degree, or equivalent experience7+ years of experience in a business/customer facing HR Business Partner role.· Experience developing and implementing initiatives to drive organizational design and change, and talent management plans.· Experience coaching and influencing senior leadership.· Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Senior Reliability Engineer will proactively drive the design for reliability for OISL hardware systems. This role has responsibility for developing and leading the reliability process, and delivering on program reliability objectives. This role will require interfacing closely with subsystem teams and Kuiper reliability team, provide technical input and guidance on designs, and support as needed with detailed analysis and test capabilities.The candidate will have experience in using Physics-of-Failure based approach to develop and implement both analytical and empirical approaches for product quality/reliability risk identification and assessment during product design, manufacturing, testing and deployment stages. The individual should be able to drive Project Kuiper’s requirements in carrying out stress driven risk analysis, including thermal, electrical and mechanical stresses in order to identify overstress and fatigue-related product weaknesses. This individual is capable of evaluating not only product design quality/reliability risks, but also has the skills and experiences in assessing electronics manufacture process related quality/reliability issues.The candidate will leverage and should be experienced with FMEA/FMECA, fault tree analysis, reliability block diagrams, and Monte Carlo simulation techniques. Additionally, the candidate should be comfortable with fundamentals of statistics, including the use of appropriate probability models based on observed failure data. At the component level, the individual will drive critical component identification and the associated vendor selection and qualification requirements.Experience with Reliasoft, Minitab, MIL-HNBK-217F (or equivalent) methods, NPRD/EPRD (or equivalent) datasets and Python preferred, but a willingness to learn instead will be considered. Experience in the aerospace field (spacecraft especially), PCBA reliability, and life testing is a plus. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Advanced degree (MS / PhD) in Reliability Engineering, Physics or related fields, or equivalent experience.- 5+ years of experience with failure analysis activities and root cause analysis.- 5+ years of experience with accelerated life testing (ALT, HALT/HASS) ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. The Kuiper Commercial Revenue Operations (CRO) team is responsible for business strategy, customer experience, product management and system development for Kuiper’s enterprise solutions.As a Senior Integration Architect in Kuiper’s Commercial Revenue Operations you will define, design, architect and implement the middleware integration layer between business, ecommerce and networking systems to enable end to end execution of offer to contract, order to activate and order to cash systems. In this role you will require expertise in architecting, designing, maintenance and support of middleware solutions that facilitate seamless communication and integration between various systems including Salesforce CPQ, SAP BRIM, Amazon e-commerce APIs, Oracle Financial Applications and Kuiper’s networking systems. You will work extensively with product managers, technical program managers, engineering managers and software engineers to define and develop technical solutions. The ideal candidate will pioneer mechanisms and processes to enhance speed and scalability within our environment. This fast-paced team presents significant opportunities for self-motivated individuals who thrive on challenges, innovation, prioritize exceptional customer experiences, and can successfully oversee complex programs from inception to completion.Key job responsibilities- Integration Strategies: Collaborate with product managers, program managers, engineering managers, software developers, architects, and other engineering teams to integrate applications and systems, ensuring seamless functionality across the organization.- Produce design artifacts including system architecture, solution design documents, data models.- Solution Development: Develop, configure, and implement middleware technologies such as message queues, API gateways, Apache NiFi or other integration tools to facilitate data exchange and streamline processes - 3P Tool proficiency: Leverage 3P integration technologies such as Salesforce Mulesoft and SAP NetWeaver Process Orchestration to integrate workflows from 3P systems with 1P applications- Architecture Design: Design robust and scalable integration architectures utilizing AWS technologies, middleware, APIs, and connectors to achieve secure and efficient data exchange between diverse systems and modules. Also Implement security measures and adhere to compliance standards to ensure data.integrity and protection during integration processes.- Troubleshooting and Maintenance: Monitor middleware performance, troubleshoot issues, and optimize configurations to maintain system efficiency and reliability.- Collaboration and Leadership: Partner closely with cross-functional teams, providing technical leadership, guidance, and expertise to ensure successful integration projects.Export Control Requirements: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumA day in the life• System Assessment and Planning: Reviewing integration requirements and assessing existing systems. Planning integration strategies and approaches based on business needs• Middleware Configuration and Development: Developing connectors or adapters to enable seamless communication between systems• Integration Implementation: Actively working on integrating various applications, databases, or systems• Collaboration and Communication: Collaborating with software developers, architects, and other IT teams. Communicating progress updates, challenges, and solutions to stakeholders.• Engage in continuous learning, coaching, hiring, and team developmentAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include: - Medical, Dental, and Vision Coverage - Maternity and Parental Leave Options - Paid Time Off (PTO) - 401(k) Plan If you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!About the teamThe Commercial Revenue Operations (CRO) team is responsible for driving business strategy, product management, customer adoption, system development and operations for Kuiper's commercial business.BASIC QUALIFICATIONS- Bachelor's degree in Computer Science, Engineering, or equivalent- 5+ years of software development experience- Proficiency in middle-ware technologies such as Apache NiFi, message brokers, API gateways, etc. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilitiesAs the Senior Manager of HW Wireless HW Development and Test, you will help to build and supervise a team of experts in antenna prototyping and test for both R&D and production phases.In this role, you will be overseeing the following:- Develop over the air test infrastructure including anechoic chambers and robotic nearfield scanners- Develop prototyping capability including equipment, SW tools, rework stations, inspection cameras- Build and test prototypes in support of R&D efforts- Conduct test and verification on HW at different stages of the product cycle, generate test reports and provide analysis on the results in support of different development and production activities- Develop post processing algorithms and tools in support of antenna, RF and electrical test- Develop the technology solutions, define and execute products and test infrastructure for upcoming generations of Kuiper's wireless technology- Develop planning and resource management systems in support of HW test at scaleThis is a highly visible role with several internal customers, a sizeable body of full time and/or contingent staff, a very large facility that hosts highly advanced test systems. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- Partner with recruiting team, interview candidates, onboard new hires- Work with their team to develop infrastructure for testing- Direct/lead internal team on the development of the infrastructure for satellite production About the teamThe team under this Sr Manager role will be a mix of Antenna designers, SW developers architects and HW developers.BASIC QUALIFICATIONS· MS degree in electrical engineering, with coursework and/or research work on antennas or RF/Microwave, or equivalent experience · 10+ years of experience in development and/or research experience in antenna, RF systems, or DSP development · 5+ years of experience in technical and/or team leadership · 5+ years of experience in antenna/RF testing · 2+ years of leading software development in support of test or calibration ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We're looking for an outstanding Mechanical Engineer with a background in the design, analysis, reliability, and lifetime of mechanisms. The ideal candidate has extensive experience performing design, analysis, sizing, and selection of mechanical mechanisms and components including gears, bearings, lubricants, motors, and gearboxes for space environments.This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to convert analytic trade studies to a qualified physical design, while optimizing for high volume production and meeting cross discipline requirements. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities* Use knowledge and experience in understanding, collaborating and trading complex inputs from multiple other disciplines (Electrical, RF, Optics, Thermal, Dynamics, Mechanisms, Materials, Manufacturing, Assembly, and Test) to guide the team and arrive at a viable technical approach* Generate detailed designs with CAD assemblies/components and drawings as deliverables.* Coordinate with other engineers, manufacturing and assembly to ensure design intent and cost effectiveness of production are achieved* Documentation and presentation of materials for technical design reviews.* Design and support test campaigns, both development and qualification/acceptance, for space hardwareA day in the lifeYou will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before.BASIC QUALIFICATIONS- Bachelor's degree in Mechanical Engineering- 5+ years of experience with CAD.- 5+ years of experience with design and development of hardware at scale (High End Precision Mechanisms desired)- 5+ years of experience with development, test, deployment of aerospace systems.- Experience with specifying/justifying margins and test sequences, and qualifying space systems.- Experience with GD&T and tolerance analysis.- Experience in DFM and manufacturing process development. Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.This role is for a highly innovative and dynamic individual with the ability to design the highest power, lowest cost per watt, and lowest mass solar module flown in space! In this role, you will be responsible for the design definition, analysis, and test methodology to verify and demonstrate that the solar module will meet the end of life power requirements for the satellite constellation. You will apply research, your creativity, and experience to develop a solar module that meets the satellite reliability goals. You will be able to trade the design space ranging from power output, mass, cost, manufacturability, reliability, and degradation factors. This is a hands-on role and requires a self-starter with extensive skills in materials selection and solar cell packaging. You will be expected to defend your design decisions through technical design reviews and demonstrate the products produce-ability and performance through the full product development life cycle.Key job responsibilities- Design and improve upon the solar modules used on the Kuiper Satellites. This includes aspects related to test, reliability, and material selection to optimize degradation factors and manufacturability.- Identify and analyze requirements in support of trade studies and the solar modules interfaces to the solar array assembly.- Create, iterate, and own detailed CAD models of the solar module design options - Including drawings, process requirements, models, and the identification of critical characteristics.- Analyze (classical / FEA) and respond to all load conditions (static, dynamic, thermal, fatigue) for compliance.- Build development sample solar modules as path finders for further process and design improvements.- Develop test plans throughout development with variable isolation DOEs and statistical analysis for long term reliability assessments as needed.- Define qualification plans and identify acceptance testing methods at volume production.- Facilitate cost trades on multiple parallel configurations for cost/manufacturability vs design uncertainty.- Produce complete design packages – detailed drawings, analysis reports, BOMs, Assembly documentation, test reports. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor's Degree in Mechanical, Materials Science, or equivalent.- 7 years minimum work experience as a mechanical engineer.- 2 years minimum work experience on Solar Modules, Solar Cells, or Solar Arrays.- Experience in developing functional specifications, design verification plans and functional test procedures- Proficiency with CAD (Computer Aided Design) and PLM (Product Lifecycle Management) systems.- Experience defining and writing requirements and test plans for complex systems. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.In Project Kuiper Enterprise Engineering, we build the software, services, and infrastructure that enable our program to design and engineer the future of LEO Satellite based broadband services. We are an AWS-focused, builder-centric organization. We build with AWS technology to develop the best solution for our team to succeed. Our team succeeds when the entire Project Kuiper organization can scale as needed to be successful.Key job responsibilitiesRoles and Responsibilities- As a Senior Network Development Engineer working in Kuiper Networking, you will have end to end ownership (design, engineering, implementation, operations escalation) of our current and newly developing available distributed systems geared towards giving Kuiper the ability to operate within realistic IP networks virtual Kuiper environments at scale. You’ll build systems using the latest AWS technologies, leveraging best-in-industry software engineering practices.- Lead the design and evolution of highly available hyper-scale networks, driving them from concept to launch, and beyond- Define and influence strategy within and outside the team- Lead project teams to deliver impactful benefits to our customers- Work closely with our network engineers and software developers to automate network deployment and operations- Drive operational excellence projects to improve network performance and reliability- Troubleshoot complex problems and develop innovative solutions- Hiring, mentoring and coaching engineers- Review and implement changes on the networkPhysical and Other Requirements:- Must be willing to support an off-hours operations escalation pager rotation.- Experience dealing with customers during problem resolution and operating efficiently under pressure.- The ability to sit in front of computer during scheduled work hours with appropriate breaks while maintaining a high level of alertness and attention to detail.Preferred experience:ARM A, M series or ARC processor emulator experience.Knowledge of networking protocols and applications, including TCP/IP. should include L1-L2.embedded software testing tool developmenthave worked on FreeRTOS or any real time operation system before.Have expertise with Linux and RTOSInvent new tools that enable more frequent and reliable software deployment, test execution, and data analysis as part of a continuous integration and release system.Develop tools that allow for test execution across multiple environments: virtualized hardware, real hardware-in-the-loop simulations, and on-orbit testing.Design and Implement Distributed Cloud-based Services and APIsPartner with device software, frontend, networking, and security engineering teamsEvangelize engineering excellence best practices and mentor junior engineers.Design and Implement embedded modeling and simulation for broadband access technologies: LTE, WiMax, WiFi or similarSolid aptitude in protocol standards such as IPv4, IPv6, Mobile IP, LTE, 802.16e, 802.11b/g/n/ac.Knowledge of object-oriented programming concepts.Strong theoretical background in Wireless Networks.Experience with systems integration and testing methodologies.Knowledge in several of the following: network protocols and applications including TCP/IP, QoS algorithms, cellular/satellite network protocols, software defined networks, network security.Write high-quality Linux based software for common processors and microcontrollers (e.g. ARM, PowerPC, x86, etc.)Deep understanding of testing, continuous integration, build, deployment & continuous monitoring.Export Control RequirementDue to the need to access certain federal controlled information, you must be a U.S. citizen for consideration.A day in the lifeAs a Network Development Engineer for Kuiper, you will be responsible for building, maintaining, and supporting the systems that Kuiper's research, development, and design teams rely on to build out our product. You will coordinate with researchers and engineers to build and support the infrastructure they need. You will work with vendors to evaluate, purchase, deploy, and support mission-critical tools. You will customize and integrate third-party software to meet Amazon's needs. You will improve existing infrastructure to ensure it continues to meet Amazon's high bar for operational excellenceBASIC QUALIFICATIONS- 5+ years of working in a Linux/Unix environment experience- 3+ years of automation scripting using Python, Bash, Shell and/or Perl experience- Experience in IP networking technologies such as - BGP, OSPF, IS-IS, MPLS, TCP, IPV6 network hardware platforms, and packet forwarding architectures.- Network design, engineering, implementation, and/or operations experience.- Bachelor's degree in Networking, Computer Science, Computer Engineering, or related technical discipline. ...

Amazon Lab126 is an inventive research and development company that designs and engineers high-profile consumer electronics. Lab126 began in 2004 as a subsidiary of Amazon.com, Inc., originally creating the best-selling Kindle family of products. Since then, we have produced groundbreaking devices like Fire tablets, Fire TV and Amazon Echo. What will you help us create?The role of a Retail Packaging Engineering Program Manager (Retail Packaging EPM) is to drive execution of the packaging user experience (UX) in support of product launches and sustaining packaging programs. This includes schedule creation and coordination with inter-disciplinary teams to ensure packaging structure and artwork is developed and approved on-time. In addition to creating the packaging plan, which includes a global workback schedule for structural development, testing, and builds (i.e. pack outs), the role requires Bill of Material (BOM) support, as well as Print On Demand (POD) labeling design and production.Key job responsibilitiesWorking closely with global, cross-functional team members (e.g., Packaging Engineering, Global Commodity Management, Industrial Design, Marketing, Product Management, Go-to-Market, Operations, Logistics, Technical Program Management), they define key aspects of product packaging via structural design, execution, test, and delivery; while motivating cross-functional teams to deliver the product(s), as per the program requirements.BASIC QUALIFICATIONS- 5+ years of design experience- Have an available online portfolio- BA/BS degree in Packaging, Engineering, UX Program Management, or related studies.- 7 years of relevant work experience in the packaging and/or program management field. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that willprovide low-latency, high-speed broadband connectivity to unserved and underservedcommunities around the world. Come work at Amazon!As a Sr. Payload I&T Engineer, you will be responsible for integration and test activities for various payload related features for the Kuiper satellite , ground gateway and the customer terminals.You will work closely with colleagues throughout Project Kuiper’s wide-ranging, inter-disciplinary team to support both lab payload testing and troubleshooting and reproducing on-orbit issues in the lab. This will include test definition, execution, optimization and reporting of test data. You must be flexible, responsive, and able to succeed within a fast-paced and collaborative environment.As a senior member of the Payload Integration and Test team, you will be responsible for verification and validation of the satellite payload including the ground gateway and customer terminals. This includes everything from integrating new features in lab with test equipment to getting features working end to end including ground service with the expected performance.Responsibilities: - Conceptualize and execute a test campaign with functionality and performance. Engage with systems, hardware, and software development engineering teams to accomplish the following in pursuit of integration and testing: capture requirements, define use cases, work backwards from product strategy.- End to end functional and performance testing to include ground equipment, satellite, customer terminals and cloud services. - Expand test coverage in lab by integrating with test equipment and collaborating closely with test equipment vendors.- Troubleshoot deeply: anticipate failures, collect data, analyze log files, compare models to observed behavior, root cause.- Troubleshoot and root cause MAC to application layer throughput degradation and packet losses across the system.- Support and reproduce on orbit functional and performance issues in the lab.- Draft and maintain high quality documentation for program-level feedback: test verification matrix, status tracking, test runs for record.- Enhance testing efficiency by automating test execution and analysis.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen ornational, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into theU.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- Bachelor's degree in electrical engineering, computer engineering, computer science or equivalent experience.- 10+ years of satellite and/or cellular lab testing experience.- Experience with Linux, basic networking skills, and RF lab equipment configuration.- Experience with test development in Python or similar language. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a Sr. PIT RF Communications System Payload Integration and Test Engineer, you will engage with an experienced cross-disciplinary team to design and test innovative product solutions. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team and engage third party suppliers in order to drive key aspects of product definition, execution, and optimization. You must be responsive, flexible and able to succeed within a collaborative and fast-paced environment.As a member of the Payload Integration and Test team, you will be responsible for verification and validation of the entire wireless system composed of multiple wireless components. This includes testing, analyzing, and optimizing RF systems from baseband modems to RF transceivers to phased-array antennas.Responsibilities· Working within a project team and taking responsibility for a high bandwidth, low earth orbit communications satellite constellation.· Deep-dives into component and subsystem designs to document expectations, evaluate tests, remedy test failures, and provide quick feedback to improve performance.· Collaborating with diverse technical teams such as software, mechanical, modem, and compliance teams to validate expectations for system-level and network-level operations, from concept through execution.· Integrating the end-to-end RF communications system. Meeting with customers internally and externally to select components. · Defining test plans and procedures for lab and RF chamber testing, based on identified requirements for subsystems and for the overall system.· Defining test plans and procedures for on-orbit payload verification or satellite testing, based on identified requirements.· Analyzing and mitigating potential self-interference and other system interference issues.· Implementing, validating, and optimizing RF lab set-ups composed of antenna, measurement equipment, and prototype equipment. Analyzing RF link budget / line-up for test set-ups and for the deployed system.· Configuring test equipment for automated operation: satellite link emulator, spectrum analyzer, signal generator, etc.· Meeting with suppliers to select enabling lab technologies.· Interpreting test results, troubleshooting issues, performing root-cause analysis for any test failures.· Documenting test results, test coverage, and other KPI metrics. Communicating status and issues effectively with developers and managers.· Shepherding payload subsystems through test campaigns throughout the development lifecycle, from concept to implementation to integration.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS· Bachelor's degree in Electrical Engineering or related discipline, or 7+ years of RF, satellite, aerospace, or related industry experience.· 7+ years of experience in RF design and/or verification with launched products. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilitiesAs a Sr. PCB Layout Engineer, you will participate in the definition and implementation of multiple spacecraft subsystems. You will contribute in all phases of PCB design and production. You must bring a combination of PCB design, fabrication, assembly, and test knowledge to a highly collaborative cross team functional team.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeYou will have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on millions of people. · Work with the Electrical and Mechanical Engineers to ensure the design meets all requirements from an electrical performance and mechanical enclosure perspective.· Create all documentation packages required to fabricate and assemble the PCB/PCBA.About the teamInnovation is part of our DNA! Our goal is to be Earths' most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space based systems design and wireless systems.BASIC QUALIFICATIONS- Bachelor’s degree in Computer Science, Computer or Electrical Engineering, or equivalent experience.- 7+ years experience of PCB layout design using industry standard PCB design suites.- 5+ years experience with high speed circuits.- 5+ years experience managing multiple projects in parallel. ...