Kirkland

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are seeking a Manufacturing Engineer to help lead the development, definition and testing of hardware, processes and line layouts for various subsystem and satellite assembly builds. This individual will work closely with engineering teams in specifying and building or procuring tools and line equipment for Kuiper hardware builds. The successful candidate has some basic experience in supporting development cycles of space hardware through development, QTP (qualification test procedures), and flight hardware ATP (acceptance test procedures).Key job responsibilitiesWork hoursSunday-Wed 5:00pm - 3:30am- Write work instructions, troubleshoot non-conformances and help execute critical satellite assembly build and test campaigns, including hands-on work.- Definition & implementation of Work Order and standard operating procedures- Design and run experiments/test articles to support process development for various subsystems.- Assist with developing manufacturing processes for automated quality SPC.- Work with engineering and technician teams to plan line layouts for Assembly, Integration & Test to intended throughput capacities.- Specify, design and help procure various assembly equipment, tools and systems to meet program development requirements - Interface with facilities personnel on site development and utility requirements definition. - AIT takt time & cost optimization planning- Review designs for manufacturability and sign off for design release- Must be willing to work off shifts and weekends as required.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- 4+ years of working in manufacturing engineering or equivalent experience- 1+ year experience with integrating, testing and troubleshooting mechanical and electronic systems- 1+ year experience with Computer Aided Design tools such as Solidworks or NX/Unigraphics ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.This position provides manufacturing engineering ownership of integrated and tested assemblies for the project Kuiper satellite program. You will be supporting the production and testing of satellite assemblies.Key job responsibilities*** 2nd Shift Schedule Hours: 5:00PM - 1:00AM****- Troubleshoot production issues in a timely manner- Support and manage daily production operations and eliminate blockers and/or part shortages- Work with cross functional teams to solve production issues- Provide design for manufacturability feedback and drive positive continuous change to hardware - Work with process, quality, and design engineers to continuously improve manufacturing processesExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeA Manufacturing Engineer in this role will be supporting the technician team by resolving any obstacles and working with responsible engineers to disposition non-conformances. This individual will work closely with engineering teams in specifying and building or procuring tools and line equipment for Kuiper hardware builds. The successful candidate has some basic experience in supporting production of space hardware through development, QTP (qualification test procedures), and flight hardware ATP (acceptance test procedures).About the teamWe are a fast-paced, data-driven team, and work with leaders in multiple technology areas to deliver the best product for our customers. We hold each other to relentlessly high standards, and constantly look for ways to improve the product’s performance, quality and cost. We are excited about the technical challenges, which motivates us rather than discourages us.We want individuals who are ready for this challenge and want to reach beyond what is possible today.BASIC QUALIFICATIONS- Bachelor's degree in mechanical engineering, electrical engineering, material science, physics or equivalent- 2+ year experience with integrating, testing and troubleshooting mechanical and electronic systems- 1+ year experience with Computer Aided Design tools such as Solidworks or NX/Unigraphics ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a Project Kuiper Manufacturing Test Engineer you will own the execution of test campaigns for sub-assemblies to ensure readiness for satellite integration. You will work with multiple engineering and manufacturing teams to specify test equipment requirements, develop and execute test plans to support development and production test initiatives. Your focus will be in optimization of test processes to enable Project Kuiper production ramp plans.This is a fast-paced, intellectually challenging opportunity to work with thought leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve. We want individuals who want to reach beyond what is possible today. Everyone on the team needs to be entrepreneurial, wear many hats and work in a highly collaborative environment.Key job responsibilities* Experience with test automation frameworks like TestStand, Robot Framework, or similar tools for creating and managing automated test sequences.* Ability to convert test plans and hardware specifications into automated scripts that execute test cases, record results, and handle exceptions.* Experience with designing test cases for functional, performance, and stress testing in hardware systems.* Strong debugging skills for identifying issues in both the test scripts and hardware setups.* Familiarity with test equipment error logs, signal analysis, and troubleshooting hardware and software integration problems.* Understanding of hardware communication protocols (e.g., SPI, I2C, RS232, Ethernet) to interface with test equipment or devices under test (DUT).* Proficiency in developing manufacturing process controls to ensure product quality and consistency, including defining key process parameters, implementing statistical process control (SPC) methods, and integrating mistake-proofing (poka-yoke) techniques.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeYour responsibilities will include identifying and resolving testing issues to keep production on schedule, as well as driving efficiency improvements through automation and process changes. You will collaborate closely with manufacturing, design, thermal and electrical engineering teams to achieve these objectives.* 40% on the shop floor, working with production teams to implement new processes, review & solve key technical blockers in production, performing production development testing, etc.* 30% independent development work analyzing production and test data to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc.* 30% meeting settings, collaborating with others on topics such as new design introductions, production process change management, production solution finding reviews, etc.About the teamThe Satellite Hardware sub-assembly team is responsible for production of satellite components and execution of test plans to ensure reliable operation of satellite vehicles in space. The team’s responsibilities include assembly station builds, in-station hardware testing, along with creating and maintaining automated scripts for functional and performance testing during Acceptance Test Procedures (ATP) in environmental chambers.The tasks and daily focus change rapidly, and you will often take on exciting new responsibilities to ensure project success. Expect to be deployed to address complex problems by identifying the scope of the issue and quickly establishing innovative and functional solutions.BASIC QUALIFICATIONS- Bachelor’s degree in electrical engineering, aerospace engineering, computer science or a related field.- 2+ years of hands-on testing experience.- 2+ years experience developing and executing test plans for complex aerospace, automotive or consumer electronics systems.- 1+ years of scripting or programming experience (Python, MATLAB, C, Labview)- Solid understanding of Engineering and Testing fundamentals. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.This is a broad scoped position providing manufacturing engineering ownership of multiple assemblies for the project Kuiper satellite program. You will be supporting new satellite assemblies early in the production ramp phase, providing critical design for manufacturability input and supporting testing of these assemblies.As a Manufacturing Engineer for mechanical sub-assemblies, you will be directly responsible for the production process development, introduction, improvement, & maintenance of key hardware on our next generation spacecraft. You’ll be a member of a team of manufacturing engineers working on the product, solving challenging technical problems associated with ramping production.Key job responsibilities- Production equipment design, procurement, installation, and qualification- Material flow planning and manufacturing process definition- Ability to support space hardware testing, including tooling design and data analysis- Strong understanding of Design for Manufacturability (DFM) and Design for Testability (DFT) principles to optimize production processes and test efficiency- Experience with designing test cases for functional, performance, and stress testing in hardware systems- Knowledge of data logging techniques and handling large data sets from test campaigns along with proficiency in processing test results including visualizations and analysis, using scripting tools or external data analysis software- Familiarity with test equipment error logs and troubleshooting hardware and software integration problemsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeYour responsibilities will include identifying and resolving assembly issues to keep builds on schedule, as well as driving efficiency improvements through tooling, automation, and design or process changes. You will collaborate closely with design, tooling, dynamics, thermal, test and electrical engineering teams to achieve these objectives.- 30% on the shop floor, working with production teams to implement new processes, review & solve key technical blockers in production, performing production development testing, etc.- 40% independent development work analyzing production and test data to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc.- 30% meeting settings, collaborating with others on topics such as new design introductions, production process change management, production solution finding reviews, etc.About the teamWe are a fast-paced, data-driven team working with leaders in multiple technology areas to deliver the best product for our customers. We hold each other to relentlessly high standards, and constantly look for ways to improve the product’s performance, quality and cost. We are motivated by technical challenges and want individuals who are excited for the fast pace of production.BASIC QUALIFICATIONS- - Bachelor’s degree in mechanical engineering, electrical engineering, aerospace engineering, physics, material science or other related discipline, or relevant experience- - 5+ years of experience in design and manufacturing of complex assemblies- - 3+ years experience authoring and executing mechanical and test work instructions.- - 5+ years experience reducing cycle time and improving labor efficiency ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are hiring a Production Coordinator that will streamline the movement of parts between departments, areas, processes, and systems and be a creator of the systems necessary to minimize overhead, reduce non-value-add processes, improve on-time delivery of product to downstream customers, and invent methods for flexible but efficient production.This will require a knowledgeable person of many aspects of aerospace production, including traceability, demand planning, flexible but efficient change management, broad aerospace assembly, testing, and handling requirements, application of six sigma and lean methodologies while enabling faster design changes and improvements and reducing the need for reviews, approvals, and manual interactions.Key job responsibilities- Work cross functionally to develop and improve production scheduling tools and WIP tracking.- Develop processes/strategies to handle work order material discrepancies within production cells.- Coordinate the schedule, plan, and initial staging of material/kits to all vital areas of production and test.- Monitor, track, and move parts as required through the production flow to ensure timely delivery to next production location.- Coordinate physical movement of parts from warehouse through production resources.- Ensure parts are handled and protected properly.- Work with the planning to resolve immediate floor shortages on work orders.- Work with planning and production personnel to maintain floor stock inventory as required- Move parts electronically through the MES system at transaction points- Work with production personnel to ensure schedule/metric goals are understood.- Support logistics process through innovative staging of workflow as required.- Support management of material certifications as required – prevent use of un-certified materials.- Support production and inventory personnel with “return to stock” and inventory purge actions.- Support assigned production cells with work order management activities as required.- Communicate part status and estimated completion dates to leadership weekly.- Assist production leadership and project teams with action item updates as required.- Develop and maintain reports to highlight needs, deliverables and constraints as required for internal and customer use.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Production Coordinator role is critical to streamlining part movement throughout the factory. This includes the monitoring of the factory operation and addressing logistical problems inside the factory.This means regularly interacting with warehouse and logistics teams when parts are missing, late, or blocked, both physically and electronically, and then permanently solving the root cause.This includes interfacing with the test lab for staging/queuing of products with specific focus on improved flexibility of operation while minimizing non-value add communication and operation.It also entails constantly reducing "red tape" and overhead needed to maintain and improve quality, requiring work with automation, quality, enterprise technology, and manufacturing teams.About the teamThis is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to remove non-value-add operations, reduce down-time, improve quality of the products, and reduce lead-time of builds and tests. We want individuals who are ready for this challenge and want to reach beyond what is possible today.BASIC QUALIFICATIONS- 2+ years of industry work experience- High school or equivalent- 1+ years experience with MRP/ERP systems ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Project Kuiper is seeking a Production Supervisor to join the Space Simulation Test Lab to support production. This role will work closely with management to supervise a technician team that supports environmental test or satellite components as well as full vehicle testing. The individual will have strong leadership skills and be required to work on multiple projects in a fast-paced environment where communication and organization will be critical. This position will also utilize a variety of analytical tools as well as aid in creating a variety of laboratory procedures which they will help to draft and maintain. This will require supervisory duties as well as working as an operator in the test lab. Key job responsibilities- Test sub assemblies and vehicle in development and production environment. - Supervise a team of technicians focused on early production and scaling output.- Work with management to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.- Work cross-functionally with management, facilities, and supply chain to maintain operations and materials the Space Simulation Test Lab- Ability to provide timely feedback on designs, processes, and custom equipment used in routine prototyping, fabrication, and characterization.- Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.- Review and approve rework to ensure accuracy and enforce traceability.- Comply with all Company Policies including Health, Safety, and Environmental Regulations, Personal Protective Equipment Requirements, and Standard Operating Procedures.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeA Production Supervisor in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite. You will have to be comfortable in a high paced environment and be able to multitask while still being able to produce high quality work. You will be leading a group of technicians expected to test and deliver hardware at a high rate while maintaining quality. You will be working to constantly improve processes that will make impacts on the efficiency of the lab. You will also play a key role in the career growth of technicians on your team. BASIC QUALIFICATIONS- 2+ years’ experience in Clean Room Manufacturing environment.- 2+ years’ experience of supervisory experience.- 2+ years’ experience in Environmental Test.- 4+ Experience manufacturing in high traceability environment ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join at a time of ramping production and be ready to jump into solve issues directly affecting the production line.Key job responsibilitiesThis position will work a 4x10 schedule, Sunday through Wednesday, 5:00PM to 3:30 AM.- Review and approve Nonconformance Reports submitted during the build and test of satellite products. - Create and submit Nonconformance reports for review and approval when defects are found either through inspection or through containment activities. - Perform process and product audits on the floor to ensure products are being built in accordance with engineering specifications and business requirements. - Transpose engineering drawing and specification requirements into inspection and quality control processes during assembly to ensure product requirements- Participate in shift stand up meetings representing Quality to ensure relevant information is shared between manufacturing personnel and quality team members. - Support Quality inspectors and manufacturing technicians to provide direction in ambiguous inspection/requirement activities, and provide quality perspective on product defects.- Perform relevant containment activities when notice of escapes or batch defects are found on material, ensuring material is controlled and written up for disposition.- Interpret engineering drawing requirements into acceptability determination for products on the floor.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifePerform daily defect investigation and resolution for assigned product familiesInvestigates product issues and determine disposition for nonconformancesRepresent quality on the floor when issues arise.Perform process and product audits to ensure compliance to QMS and product requirementsAs defect trends are identified, perform product containment exercises, notice of escapes, and screening activities to ensure that product nonconformances are addressed. Develop standard nonconformance processes to use within the manufacturing teams in order to drive efficiency in the nonconformance process.BASIC QUALIFICATIONS- BS degree in mechanical engineering or equivalent- 1-3+ years of Quality Engineer experience with oversight of product assembly lines, including representation in MRB decisions. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Space Simulation team will provide screening and testing of satellite hardware. The lab has the capability to perform testing in the R&D, Proto-Flight, Qualification and Flight test phases. This will be done utilizing equipment in the lab such as electrodynamic shakers, thermal vacuum chambers, thermal cycling chambers and other equipment to simulate the space environment.As a Space Simulation Lab Support Technician, you will be responsible for performing various tasks throughout the facility. We are looking for candidates who thrive in a fast paced, start-up like environment. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Operation of environmental test chambers (Thermal cycling, vacuum, HALT/HASS)- Install instrumentation on various types of hardware and fixtures- Execute electronic test procedures for component and system level testing- Ensure lab equipment is maintained and calibrated- Supports some preventative maintenance activities on test equipment and data acquisition systems- Your work may include contributing to improving SOPs and safety proceduresExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.The starting pay for this role in Washington State is up to $33.50/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeA technician in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite. You will have to be comfortable in a high paced environment and being able to multitask while still being able to produce high quality work. BASIC QUALIFICATIONS- High school degree or equivalency certificate- Minimum 1 year working in test lab or manufacturing environment, using basic hand tools ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Space Simulation team will provide screening and testing of satellite hardware. The lab has the capability to perform testing in the R&D, Proto-Flight, Qualification and Flight test phases. This will be done utilizing equipment in the lab such as electrodynamic shakers, thermal vacuum chambers, thermal cycling chambers and other equipment to simulate the space environment.As a Space Simulation Lab Support Technician, you will be responsible for performing various tasks throughout the facility. We are looking for candidates who thrive in a fast paced, start-up like environment. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Operation of environmental test chambers (Thermal cycling, vacuum, HALT/HASS)- Install instrumentation on various types of hardware and fixtures- Execute electronic test procedures for component and system level testing- Ensure lab equipment is maintained and calibrated- Supports some preventative maintenance activities on test equipment and data acquisition systems- Your work may include contributing to improving SOPs and safety proceduresExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.The starting pay for this role in Washington State is up to $33.50/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeA technician in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite. You will have to be comfortable in a high paced environment and being able to multitask while still being able to produce high quality work. BASIC QUALIFICATIONS- High school degree or equivalency certificate- Minimum 1 year working in test lab or manufacturing environment, using basic hand tools ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.This is a broad scoped position providing manufacturing engineering ownership of multiple assemblies for the project Kuiper satellite program. You will be supporting new satellite assemblies early in the production ramp phase, providing critical design for manufacturability input and supporting testing of these assemblies.As the lead Manufacturing Engineer for mechanical sub-assemblies, you will be directly responsible for the production process development, introduction, improvement, & maintenance of key hardware on our next generation spacecraft. You’ll be the leading technical voice for a team of manufacturing engineers working on the product, solving challenging technical problems associated with ramping production.Key job responsibilities- Production equipment design, procurement, installation, and qualification- Material flow planning and manufacturing process definition- Ability to support space hardware testing, including tooling design and data analysis- Strong understanding of Design for Manufacturability (DFM) and Design for Testability (DFT) principles to optimize production processes and test efficiency- Experience with designing test cases for functional, performance, and stress testing in hardware systems- Knowledge of data logging techniques and handling large data sets from test campaigns along with proficiency in processing test results including visualizations and analysis, using scripting tools or external data analysis software- Familiarity with test equipment error logs and troubleshooting hardware and software integration problemsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeYour responsibilities will include identifying and resolving assembly issues to keep builds on schedule, as well as driving efficiency improvements through tooling, automation, and design or process changes. You will collaborate closely with design, tooling, dynamics, thermal, test and electrical engineering teams to achieve these objectives.- 30% on the shop floor, working with production teams to implement new processes, review & solve key technical blockers in production, performing production development testing, etc.- 30% independent development work analyzing production and test data to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc.- 30% meeting settings, collaborating with others on topics such as new design introductions, production process change management, production solution finding reviews, etc.- 10% mentorship settings with other engineers on the team, performing collaborative work & coaching to develop team members skillsets, while ensuring common team executionAbout the teamWe are a fast-paced, data-driven team working with leaders in multiple technology areas to deliver the best product for our customers. We hold each other to relentlessly high standards, and constantly look for ways to improve the product’s performance, quality and cost. We are motivated by technical challenges and want individuals who are excited for the fast pace of production.BASIC QUALIFICATIONS- Bachelor’s degree in mechanical engineering, electrical engineering, aerospace engineering, physics, material science or other related discipline, or relevant experience- 5+ years of experience in design and manufacturing of complex assemblies- 3+ years experience authoring and executing mechanical and test work instructions.- 5+ years Experience reducing cycle time and improving labor efficiency ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Kuiper Manufacturing Quality team is driven to deliver high-quality product lines while maintaining a fast production rate. This position will join the team at an exciting moment, with an opportunity to directly own the quality outputs of some of our critical sub-systemsAs a Sr. Mfg Quality Engineer, you will have the opportunity to own product performance for some of the most critical sub-assemblies of the satellite, delivering creative solutions to reduce defects, and planning to prevent defects using technical quality skills.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities- Lead as Product QE over satellite mechanism assemblies, including process definition and validation for assembly and test methods, part and process qualification, inspection plans, in-process inspection capabilities, and process monitoring.- Lead MRB discussions determine product dispositions for nonconforming material.- Dive deep into defect reduction activities for the mechanisms subassemblies, and drive innovative solutions to prevent recurrence of defects.- Work directly with Inspection, Supplier Quality, and Engineering teams to develop and qualify inspection, monitoring, and verification methods for the Kuiper Production System all through the production system and ensure a no defect mentality- Be a Quality SME for the mechanisms sub-assemblies, owning defect reduction, reporting, and overall quality performance of the mechanism subassemblies, including electromechanical hardware, high cleanliness/FOD sensitivity, tight tolerance & high precision machined parts, high criticality attributes- Lead and develop new and novel process mechanisms for cross functional production system teams.A day in the life- Own yield performance for the mechanisms subassemblies, setting up monitoring systems using production data, and leading projects to creatively deliver solutions to recurring issues in production- Investigates Production System issues to reduce defect rates and drive root cause corrective actions, and continuous improvement projects- Implements the Kuiper Quality System through process development and launch mechanisms across teams similar to AS9100 requirements- Own and report out on product performance to quality and manufacturing leadership.- Partners with cross-functional groups to develop and qualify product, processes, and equipment, including Quality Assurance processes- Perform audits to ensure compliance to QMS and product requirements.- Develop and modify process flow diagrams, PFMEAs, control plans, MSAs, and other APQP artifacts related to satellite mechanisms.BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures- 5+ years as quality engineer owning performance over high precision assemblies in aerospace applications ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Project Kuiper is seeking a Test Manager to join the Integrated Test Value Stream to support production. This role will work closely with the Integration Test Value Stream Manager to supervise a technician team that performs testing for multiple types of satellite sub-assemblies as well as full-vehicle testing. The individual will have strong leadership skills and be required to work on multiple projects in a fast-paced environment where communication and organization will be critical. This position will also utilize a variety of analytical tools as well as aid in creating a variety of production processes which they will help to draft and maintain. This will require supervisory duties as well as working as an operator in the test lab.Key job responsibilities- Supervise a team of technicians focused on full-rate production.- Work with management to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.- Work cross-functionally with management, facilities, and supply chain to maintain operations and materials for the Integrated Test Value Stream- Ability to provide timely feedback on designs, processes, and custom equipment used in routine prototyping, fabrication, and characterization.- Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.- Review and approve rework to ensure accuracy and enforce traceability.- Comply with all Company Policies including Health, Safety, and Environmental Regulations, Personal Protective Equipment Requirements, and Standard Operating Procedures.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeA Test Manager in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite and that satellites are ready to be delivered for launch. You will have to be comfortable in a high paced environment and be able to multitask while still being able to produce high quality work. You will be leading a group of technicians expected to test and deliver hardware at a high rate while maintaining quality. You will be working to constantly improve processes that will make impacts on the efficiency of the satellite factory. You will also play a key role in the career growth of technicians on your team.Must have Aerospace / Environmental Test or other highly related industry experience.BASIC QUALIFICATIONS- 3+ years’ experience in Clean Room Manufacturing environment.- 2+ years’ experience of supervisory experience.- 2+ years’ experience in Environmental Test- 3+ Experience manufacturing in high traceability environment ...

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirements: Due to the need to access certain federal controlled information, you must be a U.S. citizen for consideration.Seeking an experienced Technical Infrastructure Operations Manager to lead operational teams across multiple Kuiper facilities. This role combines strategic infrastructure planning with hands-on technical leadership, managing both engineers and managers while ensuring continuous operations support.Key job responsibilities• Lead and develop teams of system engineers, IT Support engineers, and managers across multiple shifts in 24x7 manufacturing, warehousing, mission operations environments, launch facilities, government solutions facilities• Own end-to-end device lifecycle management including standardization, procurement, deployment, maintenance, and decommissioning• Oversee rack infrastructure from design through implementation, including vendor management and contract manufacturer relationships• Manage comprehensive inventory tracking across multiple facilities• Direct smart hands operations supporting network infrastructure teams• Lead end-user support operations for workplace technology (laptops, iPads) and applications• Develop and implement standard operating procedures for system deployment and maintenance• Drive continuous improvement in operational efficiency and system reliability• Drive change control best practices A day in the lifeYou start the day with reviewing critical incidents from the overnight shift at your primary manufacturing facility. After addressing immediate concerns, you lead the morning operations handoff meeting, ensuring smooth transition between shifts and alignment on key priorities. While reviewing deployment plans for new rack installations at a contract manufacturer site, you're simultaneously managing an escalation about production line systems requiring urgent patches. During team meetings, you discuss performance metrics and resource allocation across facilities. Strategic planning sessions for upcoming facility expansions are balanced with vendor negotiations for new hardware standards. A production floor walk allows you to observe recent rack installations and mentor junior engineers on best practices. The afternoon involves coordinating with network teams on infrastructure upgrades and reviewing inventory forecasts for the next quarter. Your day might extend into evening hours for maintenance window oversight or supporting cross-timezone collaboration with contract manufacturers. Throughout the day, you're balancing immediate operational needs with longer-term strategic initiatives, while remaining available for critical escalations from any of the facilities. The role requires constant prioritization between people management, technical oversight, and strategic planning - no two days are exactly alike in this dynamic manufacturing environment.BASIC QUALIFICATIONS• Bachelor's degree in Computer Science, Engineering, or related field, or equivalent practical experience• 7+ years of systems engineering or infrastructure management• 3+ years of people management experience, including managing managers• 3+ years operations and infrastructure• Experience managing 24x7 operational environments ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Quality Team at Project Kuiper is looking for a Calibration Program Lead to join our team and help manage tool compliance within our Manufacturing Quality organization.Key job responsibilitiesThe Calibration Logistics Lead will ensure all equipment used in satellite manufacturing conform to manufacturer's specifications. - Manage intake and return of tools to process owners.- Manage calibration schedule and forecasting tools/equipment for upcoming calibrations.- Coordinate onsite calibration activities with suppliers and internal teams.- Coordinate risk assessments and tool containment- Documenting records of calibration activities, including calibration dates, results, relabeling, and any adjustments.- Perform periodic audits of production area for compliance to calibration requirements.- Define and implement mechanisms to streamline too calibration workflowsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeThis role will work daily to:- Manage intake and return of tools to process owners.- Manage calibration schedule and forecasting tools/equipment for upcoming calibrations.- Coordinate onsite calibration activities with suppliers and internal teams.- Document records of calibration activities, including calibration dates, results, relabeling, and any adjustments.This individual will consistently coordinate with quality, manufacturing, and engineering to understand and ensure compliance to equipment requirements.About the teamThe Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.BASIC QUALIFICATIONS- 1+ years of experience in a logistics role- Experience managing projects and organizing schedules ...