Kirkland

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.This role is for a highly dynamic and motivated individual that will work with manufacturing engineers to construct instructions and processes for technicians performing test operations. The Test Engineer will support both development and production testing of satellites, and their subsystems. The focus for this role will be in dynamics testing - both vibration table and acoustics. You will work with the designers, systems engineers and analysts to construct detailed work instructions for technicians performing environmental test operations. This role will be responsible for supporting the test team to ensure that tests are conducted in compliance with industry standards as well as internal work instructions. This includes reviewing post-test data, and performing root cause corrective actions for any failures. This position will have the opportunity to collaborate with cross-functional teams to lead process and lab improvement projects.Key job responsibilities- This position will work a 4x10 schedule, Sunday through Wednesday, 5:00PM to 3:30 AM.- Operate test consoles and work with engineering and technician teams to conduct dynamic testing- Review test plans and write work instructions for technicians to set up and execute testing - Analyze post test data and have the ability to write test reports of any non-compliant or off-nominal events- Review failure events and be able to perform root cause analysis and implement corrective actions- Assess safe working conditions and write Job Hazard Analyses for work areas- Ability and desire to work in a hands-on lab environment- Project management skills to accomplish technical projects that span cross functional teams- Establish and increase the efficiency of environmental test processes to maximize output and enable products to rapidly transition from engineering development to rate production- Establish production processes for 5S, FOD control, tool management, calibration procedures and visual management of production tooling and equipment- Enable production test autonomy by challenging requirements, simplifying work procedures, and automating actionsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lab Engineer will assist in development and production satellite manufacturing in the environmental test domain. This position will join the team at an exciting moment, with an opportunity to help form the building blocks of creating a truly unique production system. We value data driven decision making, a comfort in dealing with ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.BASIC QUALIFICATIONS- Bachelors degree in Mechanical or Aerospace engineering, or equivalent- 2+ years hands-on environmental test experience, vibration, shock, acoustic in compliance with MIL-STD-810, SMC-S-016, or MIL-STD-1540- 2+ years working with Data Acquisition systems- Familiar with installing test instrumentation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.This role is for a highly dynamic and motivated individual that will work with manufacturing engineers to construct instructions and processes for technicians performing test operations. The Test Engineer will support both development and production testing of satellites, and their subsystems. The focus for this role will be in dynamics testing - both vibration table and acoustics. You will work with the designers, systems engineers and analysts to construct detailed work instructions for technicians performing environmental test operations. This role will be responsible for supporting the test team to ensure that tests are conducted in compliance with industry standards as well as internal work instructions. This includes reviewing post-test data, and performing root cause corrective actions for any failures. This position will have the opportunity to collaborate with cross-functional teams to lead process and lab improvement projects.Key job responsibilities-This position will work a 4x10 schedule, Sunday through Wednesday, 6:00 AM to 4:30 PM- Operate test consoles and work with engineering and technician teams to conduct dynamic testing- Review test plans and write work instructions for technicians to set up and execute testing - Analyze post test data and have the ability to write test reports of any non-compliant or off-nominal events- Review failure events and be able to perform root cause analysis and implement corrective actions- Assess safe working conditions and write Job Hazard Analyses for work areas- Ability and desire to work in a hands-on lab environment- Project management skills to accomplish technical projects that span cross functional teams- Establish and increase the efficiency of environmental test processes to maximize output and enable products to rapidly transition from engineering development to rate production- Establish production processes for 5S, FOD control, tool management, calibration procedures and visual management of production tooling and equipment- Enable production test autonomy by challenging requirements, simplifying work procedures, and automating actionsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lab Engineer will assist in development and production satellite manufacturing in the environmental test domain. This position will join the team at an exciting moment, with an opportunity to help form the building blocks of creating a truly unique production system. We value data driven decision making, a comfort in dealing with ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.BASIC QUALIFICATIONS- Bachelors degree in Mechanical or Aerospace engineering, or equivalent- 2+ years hands-on environmental test experience, vibration, shock, acoustic in compliance with MIL-STD-810, SMC-S-016, or MIL-STD-1540- 2+ years working with Data Acquisition systems- Familiar with installing test instrumentation ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are seeking a highly skilled Electro-Mechanical Maintenance Technician with expertise in preventative maintenance and repairs of electro-mechanical equipment and devices. This role is critical in ensuring the smooth operation of our solar array production equipment, serving as the primary point of contact for all equipment maintenance in that area.The ideal candidate is a proactive problem solver with strong technical knowledge, capable of troubleshooting and maintaining complex machinery. This role requires a hands-on approach to diagnosing, repairing, and optimizing electro-mechanical systems to maximize efficiency and uptime.Key job responsibilitiesSHIFT: Sunday-Wednesday or Wednesday-Saturday Shift Times: 1700-03:30- Operate, test, and maintain robotic and automated equipment to ensure optimal performance.- Respond to unplanned maintenance requests promptly to minimize production downtime.- Diagnose and repair electrical issues using technical documents such as blueprints, electrical schematics, and wiring diagrams.- Work with PLC systems at a basic or advanced level to troubleshoot and optimize equipment functionality.- Test, troubleshoot, and repair pneumatic assemblies and related components.- Analyze technical specifications of mechatronic systems, including subsystems, modules, and components, to ensure proper operation.- Perform scheduled, predictive, and preventative maintenance to proactively identify and prevent potential failures.- Utilize advanced troubleshooting skills to systematically diagnose and resolve mechanical and electrical malfunctions.- Interpret and apply technical manuals and literature to understand system operations and collaborate with other technicians.- Install, repair, adjust, and test machinery and components to ensure proper system functionality.- Communicate with machine operators and actively monitor equipment to detect and resolve issues efficiently.- Adhere to safety standards and regulations to maintain a safe working environment while operating and servicing equipment.- With or without reasonable accommodations, must be willing and able to work with powered lift equipment – for example forklift or scissor lifts.- Valid Driver’s license and able to satisfy Amazon driver eligibility criteria.- With or without reasonable accommodations, must be able to lift up to 49 pounds on some occasions, stand/walk for up to 8-10 hours (with breaks), and able to frequently push, pull, squat, bend, and reach.The starting pay for this role in Washington State is up to $37.00/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeThis position will work side by side with Engineering and Production teams to develop creative solutions and take this program from R&D, though design validation, into production then maintain equipment to support operations. About the teamThis is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.BASIC QUALIFICATIONS- High school diploma or equivalency certificate.At least 3 years working experience:- Strong hands-on experience in electro-mechanical maintenance, troubleshooting, and repairs.- Ability to read and interpret electrical schematics, blueprints, and mechanical drawings.- Basic to advanced knowledge of PLC systems and industrial automation.- Experience with pneumatic and hydraulic systems. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are seeking a highly skilled Electro-Mechanical Maintenance Technician with expertise in preventative maintenance and repairs of electro-mechanical equipment and devices. This role is critical in ensuring the smooth operation of our solar array production equipment, serving as the primary point of contact for all equipment maintenance in that area.The ideal candidate is a proactive problem solver with strong technical knowledge, capable of troubleshooting and maintaining complex machinery. This role requires a hands-on approach to diagnosing, repairing, and optimizing electro-mechanical systems to maximize efficiency and uptime.Key job responsibilitiesSHIFT: Sunday-Wednesday or Wednesday-Saturday Shift Times: 0600-16:30- Operate, test, and maintain robotic and automated equipment to ensure optimal performance.- Respond to unplanned maintenance requests promptly to minimize production downtime.- Diagnose and repair electrical issues using technical documents such as blueprints, electrical schematics, and wiring diagrams.- Work with PLC systems at a basic or advanced level to troubleshoot and optimize equipment functionality.- Test, troubleshoot, and repair pneumatic assemblies and related components.- Analyze technical specifications of mechatronic systems, including subsystems, modules, and components, to ensure proper operation.- Perform scheduled, predictive, and preventative maintenance to proactively identify and prevent potential failures.- Utilize advanced troubleshooting skills to systematically diagnose and resolve mechanical and electrical malfunctions.- Interpret and apply technical manuals and literature to understand system operations and collaborate with other technicians.- Install, repair, adjust, and test machinery and components to ensure proper system functionality.- Communicate with machine operators and actively monitor equipment to detect and resolve issues efficiently.- Adhere to safety standards and regulations to maintain a safe working environment while operating and servicing equipment.- With or without reasonable accommodations, must be willing and able to work with powered lift equipment – for example forklift or scissor lifts.- Valid Driver’s license and able to satisfy Amazon driver eligibility criteria.- With or without reasonable accommodations, must be able to lift up to 49 pounds on some occasions, stand/walk for up to 8-10 hours (with breaks), and able to frequently push, pull, squat, bend, and reach.The starting pay for this role in Washington State is up to $37.00/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeThis position will work side by side with Engineering and Production teams to develop creative solutions and take this program from R&D, though design validation, into production then maintain equipment to support operations. About the teamThis is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.BASIC QUALIFICATIONS- High school diploma or equivalency certificate.At least 3 years working experience:- Strong hands-on experience in electro-mechanical maintenance, troubleshooting, and repairs.- Ability to read and interpret electrical schematics, blueprints, and mechanical drawings.- Basic to advanced knowledge of PLC systems and industrial automation.- Experience with pneumatic and hydraulic systems.- Knowledge of safety protocols and regulatory compliance related to electro-mechanical systems. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are seeking a highly skilled and motivated Equipment Mechanic specializing in Preventative Maintenance to join our team. The ideal candidate will have a strong background in industrial equipment installation, troubleshooting, and maintenance, as well as a passion for ensuring optimal equipment performance in production and development environments.Key job responsibilitiesSHIFT: Sunday-Wednesday or Wednesday-Saturday Shift Times: 1700-03:30- Equipment Installation: Install industrial equipment and machinery with precision and adherence to specifications.- Equipment Bring-Up and Troubleshooting: Diagnose and resolve issues during equipment setup and operation.- Preventative Maintenance: Conduct regular preventative maintenance to ensure long-term reliability and performance.- Machine Commissioning: Oversee commissioning processes and provide troubleshooting support as needed.- Facilities Workshop Maintenance: Manage and maintain the workshop to ensure it is fully operational and organized.- Custom Equipment Installation: Assist in the installation and commissioning of custom-built equipment.- Collaboration with Engineering Teams: Work closely with engineers to provide design feedback, assist with project execution, and support commissioning activities.- Production and Development Support: Provide mechanical support to production and development teams as required.What We’re Looking For- Proven experience in troubleshooting and maintaining industrial machinery.- Hands-on expertise in preventative maintenance and mechanical systems.- Strong ability to work collaboratively with cross-functional teams, including engineering and production.- A proactive mindset, attention to detail, and commitment to quality.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $37/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.A day in the lifeThis position will work side by side with Engineering and Production teams to develop creative solutions and take this program from R&D, though design validation, into production then maintain equipment to support operations. About the teamThis is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.BASIC QUALIFICATIONS- High school diploma or equivalency certificate.- At least 1 year working experience with installing, commissioning, troubleshooting, and maintaining specialty industrial equipment in a manufacturing equipment.- With or without reasonable accommodations, must be willing and able to work with powered lift equipment – for example forklift or scissor lifts. - Valid Driver’s license and able to satisfy Amazon driver eligibility criteria. - With or without reasonable accommodations, must be able to lift up to 49 pounds on some occasions, stand/walk for up to 8-10 hours (with breaks), and able to frequently push, pull, squat, bend, and reach. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are seeking a highly skilled and motivated Equipment Mechanic specializing in Preventative Maintenance to join our team. The ideal candidate will have a strong background in industrial equipment installation, troubleshooting, and maintenance, as well as a passion for ensuring optimal equipment performance in production and development environments. What We’re Looking For- Proven experience in troubleshooting and maintaining industrial machinery.- Hands-on expertise in preventative maintenance and mechanical systems.- Strong ability to work collaboratively with cross-functional teams, including engineering and production.- A proactive mindset, attention to detail, and commitment to quality.Key job responsibilitiesSHIFT: Sunday-Wednesday or Wednesday-Saturday Shift Times: 0600-16:30- Equipment Installation: Install industrial equipment and machinery with precision and adherence to specifications.- Equipment Bring-Up and Troubleshooting: Diagnose and resolve issues during equipment setup and operation.- Preventative Maintenance: Conduct regular preventative maintenance to ensure long-term reliability and performance.- Machine Commissioning: Oversee commissioning processes and provide troubleshooting support as needed.- Facilities Workshop Maintenance: Manage and maintain the workshop to ensure it is fully operational and organized.- Custom Equipment Installation: Assist in the installation and commissioning of custom-built equipment.- Collaboration with Engineering Teams: Work closely with engineers to provide design feedback, assist with project execution, and support commissioning activities.- Production and Development Support: Provide mechanical support to production and development teams as required.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $37.00/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.A day in the lifeThis position will work side by side with Engineering and Production teams to develop creative solutions and take this program from R&D, though design validation, into production then maintain equipment to support operations. About the teamThis is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.BASIC QUALIFICATIONS- High school diploma or equivalency certificate.- At least 1 year working experience with installing, commissioning, troubleshooting, and maintaining specialty industrial equipment in a manufacturing equipment.- With or without reasonable accommodations, must be willing and able to work with powered lift equipment – for example forklift or scissor lifts.- Valid Driver’s license and able to satisfy Amazon driver eligibility criteria.- With or without reasonable accommodations, must be able to lift up to 49 pounds on some occasions, stand/walk for up to 8-10 hours (with breaks), and able to frequently push, pull, squat, bend, and reach. ...

This is a program for Active-Duty Military Members and Military Spouses through Hiring our Heroes (HoH) Corporate Fellowship. Must be an U.S. Military member with ~180 days of time in service remaining or an employment ready military spouse. Must be an approved candidate for Hiring our Heroes (HOH) 25-2.Completing this application will increase visibility of your candidacy for permanent placement at Amazon; however, is NOT a guarantee you will be screened or provided an offer.Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. We are seeking talented Integration Technicians to lead development and production integration and test activities of the Kuiper satellite. Key job responsibilities- Functional and environmental testing, repair and troubleshooting of Kuiper phased array antenna PCBA's- Integration of the Kuiper satellite and various complex subassemblies in a cleanroom and ESD controlled environment- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions- Use computer software programs for controlling tests- Check and inspect your work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements- Collaborate with manufacturing and test engineers to develop and document activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentThe starting pay for this role in Washington State is up to $37.00/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeThe Integration and Test Technician II will work closely with cross-functional engineering, test, quality and operations teams on both first-article hardware development and production hardware integration processes. This role mainly focuses on testing Kuiper Phased Array Antenna PCBA's in a production environment. This position requires skill and experience in a variety of areas, including mechanical assembly, avionics integration, electrical checkouts and environmental testing. In short, you will be responsible for a majority of the most critical tasks to build the Kuiper satellite, ensuring high quality, workmanship and safety standards are adhered to on a daily basis. BASIC QUALIFICATIONSMust be an U.S. Military member with ~180 days of time in service remaining or an employment ready military spouse. Must be an approved candidate for Hiring our Heroes (HOH) 25-2High school diploma, GED or equivalent experience1+ years' experience in electrical hardware assembly, test, and/or installation, preferably PCBA testing ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are seeking talented mid-level integration technicians on 2nd shift to execute development and production integration and test activities of the Kuiper satellite in final integration. Key job responsibilities- Integration and test of the Kuiper satellite and various complex subassemblies in a cleanroom and ESD controlled environment- Rigging and critical lifts of bulky, sensitive hardware- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions- Run functional and environmental testing on units, including some basic troubleshooting operations- Use computer software programs for controlling tests- Check and inspect your work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements- Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentAdditional Requirements- Willing to work all shifts, overtime and weekends as needed. Estimated shift times: Sun – Wed OR Wed – Sat (5pm – 3:30am PST) . Shifts may vary, depending on program needs.- Able to stand for long periods of time and perform repetitive assembly operations- Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position.- Able to lift at least 25 lbs. unassisted- Must be willing to travel up to 5% to different sites and for trainingExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $33.50/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.A day in the lifeThe Integration Technician II will work closely with cross-functional engineering, test, quality and operations teams on both first-article hardware development and production hardware integration processes. This position requires skill and experience in a variety of areas, including mechanical assembly, avionics integration, rigging, electrical checkouts and environmental testing. In short, you will be responsible for a majority of the most critical tasks to build the Kuiper satellite, ensuring high quality, workmanship and safety standards are adhered to on a daily basis. BASIC QUALIFICATIONS- High school diploma, GED or equivalent experience- 2+ years experience in mechanical or electrical hardware assembly, test, and/or installation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Key job responsibilities- Integration and test of the Kuiper satellite and various complex subassemblies in a cleanroom and ESD controlled environment- Rigging and critical lifts of bulky, sensitive hardware- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions- Run functional and environmental testing on units- Use computer software programs to control tests- Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $33.50/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.A day in the lifeThe Integration Technician II will work closely with cross-functional engineering, test, quality and operations teams on both first-article hardware development and production hardware integration processes. This position requires skill and experience in a variety of areas, including mechanical assembly, avionics integration, rigging, electrical checkouts and environmental testing. In short, you will be responsible for a majority of the most critical tasks to build the Kuiper satellite, ensuring high quality, workmanship and safety standards are adhered to on a daily basis. BASIC QUALIFICATIONS- High school diploma, GED or equivalent experience- 1+ year of experience in mechanical or electrical hardware assembly, test, and/or installation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Key job responsibilities- Integration and test of the Kuiper satellite and various complex subassemblies in a cleanroom and ESD controlled environment- Rigging and critical lifts of bulky, sensitive hardware- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions- Run functional and environmental testing on units- Use computer software programs for controlling tests- Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.The starting pay for this role in Washington State is up to $33.50/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeThe Integration Technician II will work closely with cross-functional engineering, test, quality and operations teams on both first-article hardware development and production hardware integration processes. This position requires skill and experience in a variety of areas, including mechanical assembly, avionics integration, rigging, electrical checkouts and environmental testing. In short, you will be responsible for a majority of the most critical tasks to build the Kuiper satellite, ensuring high quality, workmanship and safety standards are adhered to on a daily basis. BASIC QUALIFICATIONS- High school diploma, GED or equivalent experience- 1+ years of experience in mechanical or electrical hardware assembly, test, and/or installation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are seeking talented mid-level integration technicians on 1st shift to execute development and production integration and test activities of the Kuiper satellite in final integration. Key job responsibilities- Integration and test of the Kuiper satellite and various complex subassemblies in a cleanroom and ESD controlled environment- Rigging and critical lifts of bulky, sensitive hardware- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions- Run functional and environmental testing on units, including some basic troubleshooting operations- Use computer software programs for controlling tests- Check and inspect your work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements- Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentAdditional Requirements- Willing to work all shifts, overtime and weekends as needed. Estimated shift times: 1st shift (Sun-Wed and 6:00 am-4:30pm PST). - Able to stand for long periods of time and perform repetitive assembly operations- Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position.- Able to lift at least 25 lbs. unassisted- Must be willing to travel up to 5% to different sites and for trainingExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $37.00/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.A day in the lifeThe Integration Technician III will work closely with cross-functional engineering, test, quality and operations teams on both first-article hardware development and production hardware integration processes. This position requires skill and experience in a variety of areas, including mechanical assembly, avionics integration, rigging, electrical checkouts and environmental testing. In short, you will be responsible for a majority of the most critical tasks to build the Kuiper satellite, ensuring high quality, workmanship and safety standards are adhered to on a daily basis. BASIC QUALIFICATIONS- High school diploma, GED or equivalent experience- 2+ years of experience in mechanical or electrical hardware assembly, test, and/or installation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are seeking talented mid-level integration technicians on 2nd shift (2:30pm - 11pm) to execute development and production integration and test activities of the Kuiper satellite in final integration. Key job responsibilities- Integration and test of the Kuiper satellite and various complex subassemblies in a cleanroom and ESD controlled environment- Rigging and critical lifts of bulky, sensitive hardware- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions- Run functional and environmental testing on units, including some basic troubleshooting operations- Use computer software programs for controlling tests- Check and inspect your work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements- Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentAdditional Requirements- Willing to work all shifts, overtime and weekends as needed. Estimated shift times: Sun – Wed OR Wed – Sat (5pm – 3:30am PST) . Shifts may vary, depending on program needs.- Able to stand for long periods of time and perform repetitive assembly operations- Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position.- Able to lift at least 25 lbs. unassisted- Must be willing to travel up to 5% to different sites and for trainingExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $37.00/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.A day in the lifeThe Integration Technician III will work closely with cross-functional engineering, test, quality and operations teams on both first-article hardware development and production hardware integration processes. This position requires skill and experience in a variety of areas, including mechanical assembly, avionics integration, rigging, electrical checkouts and environmental testing. In short, you will be responsible for a majority of the most critical tasks to build the Kuiper satellite, ensuring high quality, workmanship and safety standards are adhered to on a daily basis. BASIC QUALIFICATIONS- High school diploma, GED or equivalent experience- 2+ years of experience in mechanical or electrical hardware assembly, test, and/or installation ...

Project Kuiper is seeking several experienced Value Stream Leaders to lead high-volume production operations at Kuiper’s satellite production facility in Kirkland, WA. Kuiper’s constellation will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Value Stream Leader will be the single-threaded owner responsible for one of 5 organizations that manufacture the top-level assemblies of the Kuiper Satellite. The Manager's responsibilities will include defining and implementing the strategic vision for each value stream and overseeing the daily operations of the value stream. Safety and product quality are paramount. The Manager and their team will work closely with development engineering for manufacturing process definitions and will leverage our teams in procurement, manufacturing, and supply chain to enable high-volume production throughput. The role is based in Kirkland, WA.STRATEGIC LEADERSHIP & IMPACTAs one of only 5 Value Stream Leaders, you will define and execute the strategic vision for manufacturing a critical segment of Kuiper's satellite constellation - one of Amazon's most ambitious and transformative projectsDirect ownership of end-to-end production strategy and execution for a major satellite assembly line that is core to Kuiper's mission of global connectivityKey member of the production leadership team with significant visibility and influence at senior leadership levels across Kuiper and AmazonStrategic decision-maker for production scale-up plans that will help deliver thousands of satellites to create a world-changing broadband constellationSCOPE OF RESPONSIBILITYFull P&L and operational ownership of a major value stream within Kuiper's state-of-the-art Kirkland manufacturing facilityLeadership of a large, multi-disciplinary team including both technical and production staffControl of critical manufacturing assets and production lines essential to Kuiper's successStrategic partnership with development engineering to define and implement manufacturing processesCross-functional leadership working with procurement, supply chain, quality, and other key stakeholdersORGANIZATIONAL INFLUENCEDirect reporting relationship to Production Plant Manager with extensive senior leadership exposureCritical role in shaping manufacturing culture and operational excellence across the broader organizationStrategic influence over facility layout, production line design, staffing models, and operational decision-makingKey voice in long-term production strategy and scale-up planningLeadership in implementing quality systems and safety standards that will define Kuiper's manufacturing excellenceExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesChampion Amazon's Leadership Principles to drive a culture of ownership, accountability, teamwork, and working hard while having funCreate a culture of safety and quality through active engagement and leadership of the technician workforceEstablish great working relationships with design engineering, quality, EH&S, and supply chain teamsWork closely with key stakeholders to develop a long-term strategy for production rate increases over timeDrive operational excellence with a combination of data analytics and Lean operationsA day in the lifeThe Value Stream Leader will lead a specific manufacturing organization at Kuiper's new full-rate production facility. They will own the layout and execution of the production lines, line balancing, staffing, and operational decision-making for their production lines, and work closely with engineering teams to ensure processes are capable of meeting design intent. The successful candidate has extensive operations experience in manufacturing of space hardware, and a thorough understanding of aerospace/space standards and quality systems. The Value Stream Leader will be a visible leader with strong communication skills. The role is highly impactful and will drive our success as the premier satellite broadband constellation.About the teamProject Kuiper's mission is to provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Production of Kuiper's develpoment satellites takes place in Redmond, WA, and we have announced a new full-rate production facility in Kirkland, WA that will meet the demands of the full constellation.BASIC QUALIFICATIONSBachelor's degree in engineering, operations management, or related discipline (Master's preferred)8+ years of progressive manufacturing operations experience, including 5+ years in space/aerospace hardware production5+ years of people leadership experience managing large, complex teams (50+ employees) across multiple shifts and disciplinesDemonstrated track record of leading strategic manufacturing initiatives with P&L responsibilityExperience scaling operations from low to high volume production ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.One of the most ambitious missions that Kuiper has undertaken to date, the Kuiper satellite constellation, is our solution to providing reliable internet to the entire world. We are looking for talented technicians to help full-scale production of the Kuiper satellites.The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Driving and developing departmental continuous improvement initiatives and support implementation.- Assemble mechanical and electrical satellite components, sub-assemblies, and integration assemblies, fabricating and/or processing materials into complex manufactured products, and operating testing equipment and tooling, all in a Cleanroom and ESD control environment.- Lead process work and review output for quality and adherence to standards and procedures- Lead daily team meeting facilitation, end-of-shift reporting, and coordinating efforts to minimize production interruptions.- Support new-hire training programs within your department and contribute to development and modification of training programs. You develop training plans for your team and are responsible for implementing training programs within your department.- Drive safety standards and operations protocol while ensuring team compliance.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lead MFG Assembly Technician will identify process improvements to improve build efficiency. You will work closely with multiple engineering teams on both early hardware development and setting the stage for later production hardware manufacturing processes. The successful candidate thrives in a fast paced, start-up like environment and are able to apply their technical expertise, leadership skills and commitment to quality to positively impact team metrics and organization goals. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.About the teamWe are a group of Technicians with well over 20 years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.BASIC QUALIFICATIONS- High school diploma or equivalent- 4+ years relevant high traceability manufacturing experience (Aerospace / Medical, etc.)- 4+ years of hands-on work experience Electro-Mechanical Assembly, Final Integration and/ or Harness Integration experience- 4+ years experience in a fast-paced production environment with Flight Hardware- 4+ years of hand on experience with precision torque, measurement and inspection devices (i.e., automated and manual torque wrenches, calipers, micrometers, profilometers, optical inspection devices, multi-meters, torque wrenches)Additional Requirements:- Willing to work all shifts, overtime and weekends as needed. Estimated shift times 1st shift: Wed-Sat 6AM-4:30PM Shift will vary, depending on program needs- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position- Able to lift-up to 25lbs. unassisted ...

This is a program for Active-Duty Military Members and Military Spouses through Hiring our Heroes (HoH) Corporate Fellowship. Must be an U.S. Military member with ~180 days of time in service remaining or an employment ready military spouse. Must be an approved candidate for Hiring our Heroes (HOH) 25-2.Completing this application will increase visibility of your candidacy for permanent placement at Amazon; however, is NOT a guarantee you will be screened or provided an offerProject Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.One of the most ambitious missions that Kuiper has undertaken to date, the Kuiper satellite constellation, is our solution to providing reliable internet to the entire world. We are looking for talented technicians to help full-scale production of the Kuiper satellites.The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Driving and developing departmental continuous improvement initiatives and support implementation.- Assemble mechanical and electrical satellite components, sub-assemblies, and integration assemblies, fabricating and/or processing materials into complex manufactured products, and operating testing equipment and tooling, all in a Cleanroom and ESD control environment.- Lead process work and review output for quality and adherence to standards and procedures- Lead daily team meeting facilitation, end-of-shift reporting, and coordinating efforts to minimize production interruptions.- Support new-hire training programs within your department and contribute to development and modification of training programs. You develop training plans for your team and are responsible for implementing training programs within your department.- Drive safety standards and operations protocol while ensuring team compliance.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lead MFG Assembly Technician will identify process improvements to improve build efficiency. You will work closely with multiple engineering teams on both early hardware development and setting the stage for later production hardware manufacturing processes. The successful candidate thrives in a fast paced, start-up like environment and are able to apply their technical expertise, leadership skills and commitment to quality to positively impact team metrics and organization goals. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.About the teamWe are a group of Technicians with well over 20 years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.BASIC QUALIFICATIONS- Must be an U.S. Military member with ~180 days of time in service remaining or an employment ready military spouse. Must be an approved candidate for Hiring our Heroes (HOH) 25-2- High school diploma or equivalent- 4+ years relevant high traceability manufacturing experience (Aerospace / Medical, etc.)- 4+ years of hands-on work experience Electro-Mechanical Assembly, Final Integration and/ or Harness Integration experience- 4+ years experience in a fast-paced production environment with Flight Hardware- 4+ years of hand on experience with precision torque, measurement and inspection devices (i.e., automated and manual torque wrenches, calipers, micrometers, profilometers, optical inspection devices, multi-meters, torque wrenches)Additional Requirements:- Willing to work all shifts, overtime and weekends as needed. Estimated shift times 1st shift: Wed-Sat 6AM-4:30PM Shift will vary, depending on program needs- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position- Able to lift-up to 25lbs. unassisted ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Driving and developing departmental continuous improvement initiatives and support implementation.- Assemble mechanical and electrical satellite components, sub-assemblies, and integration assemblies, fabricating and/or processing materials into complex manufactured products, and operating testing equipment and tooling, all in a Cleanroom and ESD control environment.- Lead process work and review output for quality and adherence to standards and procedures- Lead daily team meeting facilitation, end-of-shift reporting, and coordinating efforts to minimize production interruptions.- Support new-hire training programs within your department and contribute to development and modification of training programs. You develop training plans for your team and are responsible for implementing training programs within your department.- Drive safety standards and operations protocol while ensuring team compliance.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lead MFG Assembly Technician will identify process improvements to improve build efficiency. You will work closely with multiple engineering teams on both early hardware development and setting the stage for later production hardware manufacturing processes. The successful candidate thrives in a fast paced, start-up like environment and are able to apply their technical expertise, leadership skills and commitment to quality to positively impact team metrics and organization goals. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.About the teamWe are a group of Technicians with well over 20 years of diverse skills and experience. Each team member brings in willingness to train and positive team energy. Some tasks you may be an individual contributor, but may also work in a group environment to achieve organizational goals. This group of Technicians thrived in success by working as a team. We are currently in research and development but moving towards production environment.BASIC QUALIFICATIONS- High school diploma or equivalent- 4+ years relevant aerospace manufacturing experience- 4+ years of hands-on work experience Electro-Mechanical Assembly, Final Integration and/ or Harness Integration experience- 4+ years experience in a fast-paced production environment with Flight Hardware- 4+ years of hand on experience with precision torque, measurement and inspection devices (i.e., automated and manual torque wrenches, calipers, micrometers, profilometers, optical inspection devices, multi-meters, torque wrenches)Additional Requirements:- Willing to work all shifts, overtime and weekends as needed. Estimated shift times 1st shift: 6:00AM-4:30PM Wed-Sat. Shift will vary, depending on program needs- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position- Able to lift-up to 25lbs. unassisted ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Lead and guide a team of Integration & Test Technicians by planning, assigning and executing daily tasks, and assisting with new member onboarding and training- Perform functional and environmental testing, repair and troubleshooting of Kuiper phased array antennas and other critical assemblies- Enforce high quality and safety standards for both product and personnel- Produce daily reports on Integration phased array antenna builds- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read, create and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions, some of which may be ambiguous or incomplete in nature- Use computer software programs for conducting tests- Check and inspect your work, as well as others, after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements- Collaborate with manufacturing, design and test engineers to develop, document and complete activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lead Integration & Test Technician is responsible for guiding a team of test technicians to test and troubleshoot Kuiper phased array antennas. This team will work closely with cross-functional engineering, test, quality and operations teams to deliver Kuiper production hardware at the final integration and testing level, prior to launch. This position requires skill and experience in a variety of areas, including PCBA testing and handling, mechanical assembly, avionics integration, electrical checkouts and environmental testing. You will be responsible for ensuring critical tasks to test Kuiper phased array antennas are performed with high quality, high workmanship and safety standards, and on time.BASIC QUALIFICATIONS- High school diploma, GED or equivalent experience- 4+ years experience in electrical hardware assembly, test, and/or installation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. As a 1st shift back end Maintenance Supervisor, you will be engaged in installing, commissioning, and maintaining specialty equipment with the ultimate goal of supporting satellites from the stages of early testing, integration, through to launch and on to production stability. You will maintain complex mechanical, electrical and vacuum chambers to ensure their efficient operations and reliable testing. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to ensure that critical needs and demands on second shift are being met. You will be essential in the on-time delivery of hardware capable of achieving mission success as you are directly responsible for all equipment supporting these functions, and will have broad scope and autonomy to fill all gaps between equipment concept and operations. You will work closely with your first shift team members to ensure critical pass downs and communications are being provided daily. You will lead the charge to develop, improve, review and maintain the preventative maintenance program while ensuring appropriate procedures in place to supporting spacecraft testing and builds. This shift is scheduled for Wednesday through Sunday, 6 am to 4:30 pm.Key job responsibilities- Hands on installation of mechanical systems, electrical sub-systems, and troubleshooting related to a variety of manufacturing equipment - Develop, design, and implement solutions to difficult problems with a sense of urgency - Establish preventative maintenance programs from concept to implementation - Maintain the operation of equipment and systems in the areas of responsibilities such as: Compressed air, electrical distribution, TVAC, thermal chambers, shock and vibe test equipment - Manage internal and external maintenance technicians - Coordinate, schedule and manage multiple projects while meeting tight deadlines - Ensure all environmental, health safety procedures are followed by onsite personnel - Work across teams to develop clear and concise project details for mechanical, electrical, and machine functionality requirements allowing for expedient installations leading to successful operations - Coordinate with engineering, operations, contractors, and maintenance teams to define design facility requirements for specialty equipment during initial stages of design through completion of installation - Establish effective relationships with teams across the program - Develop an understanding of local permit processes - Manage critical spare parts budgets for K.E.G. as equipment is being defined, installed and operated.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamThe Kuiper Equipment Group supports the Space Simulation and Manufacturing teams by installing, commissioning, and maintaining equipment that will provide screening and testing of satellite hardware. The lab has the capability to perform testing in the R&D, Proto-Flight, Qualification and Flight test phases. This will be done utilizing equipment in the lab such as electrodynamic shakers, thermal vacuum chambers, thermal cycling chambers and other equipment to simulate the space environment while assuming responsible for assembly, integration, and test of satellite hardware and the associated equipment and facility definition required to achieve production rates.BASIC QUALIFICATIONS- 5+ years of industrial engineer, operations engineer, manufacturing engineer, or project engineer in a manufacturing environment experience ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. As a 2nd shift back end Maintenance Supervisor, you will be engaged in installing, commissioning, and maintaining specialty equipment with the ultimate goal of supporting satellites from the stages of early testing, integration, through to launch and on to production stability. You will maintain complex mechanical, electrical and vacuum chambers to ensure their efficient operations and reliable testing. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to ensure that critical needs and demands on second shift are being met. You will be essential in the on-time delivery of hardware capable of achieving mission success as you are directly responsible for all equipment supporting these functions, and will have broad scope and autonomy to fill all gaps between equipment concept and operations. You will work closely with your 2nd shift team members to ensure critical pass downs and communications are being provided daily. You will lead the charge to develop, improve, review and maintain the preventative maintenance program while ensuring appropriate procedures in place to supporting spacecraft testing and builds. This shift is scheduled for Wednesday through Sunday, 5 pm to 3:30 am.Key job responsibilities- Hands on installation of mechanical systems, electrical sub-systems, and troubleshooting related to a variety of manufacturing equipment - Develop, design, and implement solutions to difficult problems with a sense of urgency - Establish preventative maintenance programs from concept to implementation - Maintain the operation of equipment and systems in the areas of responsibilities such as: Compressed air, electrical distribution, TVAC, thermal chambers, shock and vibe test equipment - Manage internal and external maintenance technicians - Coordinate, schedule and manage multiple projects while meeting tight deadlines - Ensure all environmental, health safety procedures are followed by onsite personnel - Work across teams to develop clear and concise project details for mechanical, electrical, and machine functionality requirements allowing for expedient installations leading to successful operations - Coordinate with engineering, operations, contractors, and maintenance teams to define design facility requirements for specialty equipment during initial stages of design through completion of installation - Establish effective relationships with teams across the program - Develop an understanding of local permit processes - Manage critical spare parts budgets for K.E.G. as equipment is being defined, installed and operated.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamThe Kuiper Equipment Group supports the Space Simulation and Manufacturing teams by installing, commissioning, and maintaining equipment that will provide screening and testing of satellite hardware. The lab has the capability to perform testing in the R&D, Proto-Flight, Qualification and Flight test phases. This will be done utilizing equipment in the lab such as electrodynamic shakers, thermal vacuum chambers, thermal cycling chambers and other equipment to simulate the space environment while assuming responsible for assembly, integration, and test of satellite hardware and the associated equipment and facility definition required to achieve production rates.BASIC QUALIFICATIONS- 5+ years of industrial engineer, operations engineer, manufacturing engineer, or project engineer in a manufacturing environment experience ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,000+ satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. We are looking for talented technicians to help full-scale production of the Kuiper satellites. The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution. Key job responsibilities- Follow work instructions and safety procedures- Assemble and test with emphasis to detail, an assortment of LRUs, electrical-mechanical assemblies, avionics, or other complex aerospace builds- Participate in process improvements, maintain floor stock inventory- You will independently execute and prioritize work to meet company deliverables - Execute test procedures for component and system level testing maintenance - Champion safety requirements in all designated zones and work locations- Ensure lab equipment is maintained and calibrated- Supports some preventative maintenance activities on test equipment and data acquisition systems- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)- Your work may include contributing to improving SOPs and safety proceduresExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $33.50 / hour and employees are eligible for incremental raises based on tenure. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon’s internal or external careers site.Additional Requirements: Willing to work 4 / 10s as assigned:2nd shift: 5:00pm - 3:30am PST Sunday -Wednesday OR Wednesday - Saturday- Willing to work overtime and weekends as needed. Shift will vary, depending on program needs.- Flexible working/commuting in between site locations Redmond, WA and Kirkland, WA- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift-up to 25lbs. unassisted BASIC QUALIFICATIONS• 1+ years in a high traceability manufacturing environment, or relevant trade school certification• 1+ years using hand tools and/or precision measuring instruments (i.e., Calipers, multi-meters, torque wrenches)• 1+ years working with test tools and test methods that adequately validate the system• Experience reading, interpreting and working from engineering documentation and/or drawings ...