Northridge

Project Kuiper is a initiative within Amazon that aims to revolutionize global connectivity through the development of a state-of-the-art Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering high-speed, low latency, internet services to underserved and unserved communities and remote communities around the world. By leveraging satellite technology, we are working towards a future where everyone has access to reliable and high-quality internet connectivity regardless of their location. The Kuiper Government Solutions (KGS) Engineering organization is a multi-disciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.The Electrical Integration & Test (I&T) engineer will engage with an experienced cross-disciplinary team to design, integrate, and test innovative space-based and terrestrial electronics. The Electrical I&T Engineer will work closely with colleagues throughout Kuiper Government Solutions (KGS) inter-disciplinary teams and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The Electrical I&T Engineer must be responsive, flexible, innovative, and able to succeed within a collaborative, fast-paced, and dynamic environment. As a member of the KGS Engineering Integrated Systems Solutions organization, the Electrical I&T engineer will be responsible for developing the architecture and executing the design, build, and validation of test systems for complex electronic subsystems. The candidate will have the capabilities to develop test procedures, test software, test scripts, APIs, and automation to enable test and verification at various products levels including but not limited to system-on-chip (SoC) calibration algorithm verification, silicon wafer and photonics test, test automation and data analysis for electronics, opto-electrical subsystems, and RF-system level tests including environmental tests. The candidate will be responsible for ensuring the test architecture supports all aspects of the integration, test, verification, and validation of one or more of the following: the satellite bus electronic subsystems, RF payloads, opto-electrical payloads, custom ground terminals, or custom user terminals. This includes testing, analyzing, and optimizing the test support equipment to the particular satellite or ground element being developed. Testing efforts include functional and performance testing through various environmental conditions as required and it will be the candidate’s responsibility to ensure the test systems enable efficient test execution and requirements verification. The successful candidate will have demonstrated experience working on large-scale programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). Key job responsibilities• Provide Electronics Integration and Test leadership to one or more of the following: the satellite bus electronics, RF payloads, optical payloads, custom ground terminals, or custom user terminals.• Provide electronics test design technical expertise to one or more of the following products and services: satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals.• Specify and develop end-to-end payload or sub-system integration and test plans and procedures to validate performance against customer and/or partner requirements• Create test algorithms, test scripts, and calibration routines as part of performing lab and field evaluation of integrated bus, payloads or sub-systems• Analyze electronics test data and engage with cross functionally with teammates, partners, suppliers, or customers to evaluate the product performance and provide proactive feedback on potential improvements.• Architect, design, and validate electrical support equipment necessary to enable test execution and requirements verification• Prepare reports documenting test results, test coverage, performance results and other key performance indicator (KPI) metrics, and communicate issues effectively with developers and managers• Effectively manage and track to closure test anomalies, defects, and bugs; Debug, root-cause, and make continuous improvements of control systems in a high-rate production environmentThis position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.”About the teamKuiper Government Solutions (KGS) Engineering is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both space-based and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution, including architecture development, requirements and interface definition through assembly, integration, and test (AI&T). verification, and post-delivery and operational support. BASIC QUALIFICATIONS- Bachelor's degree in electrical engineering- 5+ years of experience in board level design and design verification for aerospace, automotive, or consumer electronics products; OR 5+ years of experience building complex test systems including test software systems- 5+ years of experience developing electronics test requirements, plans, and procedures for electrical product design verification and validation.- 5+ years of experience in the use of standard electronic lab test equipment (i.e. network analyzers, oscilloscopes, spectrum analyzers, function generators, multimeters, etc.)- 5+ years of experience in embedded software or FPGA verification I Xilinx tools for aerospace, automotive, or consumer electronics products; OR 5+ years of experience building complex test systems including integrating test software- Experience with testing satellite communications payloads, optical communications payload, spacecraft bus and constituent subsystems, or space vehicle level. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Innovation is part of our DNA! Our goal is to be Earth's most customer centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in distributed systems and hardware design.As an FPGA engineer on the Kuiper Government Solutions team you will create FPGA solutions to support Amazon Project Kuiper’s satellite communication system. This is a unique opportunity to define a groundbreaking new system with few legacy constraints. You will work with systems and algorithm teams to define/develop/implement/test/release FPGA-based solutions to enable Project Kuiper. In particular, your work will power high-speed communication links while making use of the latest generations of FPGA technologies, design processes, and tools. You will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations, partner teams, and end customers. Key job responsibilities- Create and release FPGAs through the development phases of uArchitecture-RTL Design-Physical Implementation-Timing Closure–Simulation Validation– Lab Based Silicon Validation - Collaborate with RF and Optical Communications and Signal Processing system architects and design engineers to define, design, implement, and test modem and digital logic functions in FPGA technology- Collaborate with system architects and design engineers to implement digital logic functions in FPGA prototypes to validate/tradeoff architecture & design alternatives- Collaborate with systems architects, HW engineering design teams & FW/SW design teams to bring up and test systems combining FPGA, firmware, Optics, and Networking functions.- Drive trade-off analysis to benefit customer experience and optimization of target technology resources for cost/size/power/performance/featuresThis position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.About the teamThe Kuiper Solutions Engineering team is a multi-disciplinary technology team involved in developing and delivering targeted and scalable solutions for custom satellite and ground applications, including United States and allied government customers.BASIC QUALIFICATIONS- Bachelor's degree in Electrical Engineering, related discipline, or 5 + years of FPGA experience- 3+ years of experience in FPGA design & implementation- 3+ year of experience in the design, test, delivery, support of multiple FPGAs shipping to customers- 3+ years of experience with modern ASIC / FPGA design and verification tools ...

Project Kuiper is a initiative within Amazon that aims to revolutionize global connectivity through the development of a state-of-the-art Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering high-speed, low latency, internet services to underserved and unserved communities and remote communities around the world. By leveraging satellite technology, we are working towards a future where everyone has access to reliable and high-quality internet connectivity regardless of their location. The Kuiper Government Solutions (KGS) Engineering organization is a multi-disciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.The Lab Engineer will engage with an experienced cross-disciplinary team to design, integrate, and test innovative space-based and terrestrial systems and subsystems. The Lab Engineer will work closely with colleagues throughout Kuiper Government Solutions (KGS) inter-disciplinary teams and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The Lab Engineer must be responsive, flexible, innovative, and able to succeed within a collaborative, fast-paced, and dynamic environment. As a member of the KGS Engineering Integrated Systems Solutions organization, the Lab Engineer will be responsible for the quality, reliability, cost, manufacturability, throughput, and security of KGS product deliverables. The Lab Engineer accomplishes this by effectively managing research & development (R&D) engineering labs, identifying process improvements to improve build and test efficiency, and working closely with multiple engineering teams on early hardware & software development efforts setting the stage for low-rate production manufacturing and factory acceptance test processes. The candidate will have the capability to build and assemble production hardware, develop mechanical tooling, integrate and validate electronic test systems, develop manufacturing and test procedures, and modify automation test software for various products including but not limited to opto-electrical subsystems, opto-mechanical, electro-mechanical subsystems, and RF systems. This candidate will also be responsible for the maintenance and operation of environmental test systems including but not limited to thermal vacuum/thermal cycle test chambers, dynamics/vibration test systems, and accelerate life test systems. The successful candidate thrives in a fast paced, start-up like environment and are able to apply their technical expertise, leadership skills and commitment to quality to positively impact team metrics and organization goals. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.The successful candidate will have demonstrated experience working on large-scale programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). Key job responsibilities• Document and assemble opto-mechanical, opto-electrical, electro-mechanical satellite assemblies, sub-assemblies, and integration of subsystems and final space vehicle including fabrication and/or materials processing into complex manufactured products• Manage R&D development lab spaces, order/stock consumables, track assets.• Responsible for lab equipment requirements, preventative maintenance, calibration, and improvements including but not limited to test equipment, tooling, data acquisition systems, environmental chambers, etc.• Responsible for lab operations, maintenance, and safety. Including lab inventory maintenance• Experience working with and driving safety for FOD, ESD sensitive hardware and cleanroom requirements• Responsible for executing and improving on assembly, build, integration, and test procedures for assembly, subsystem, and system level products. • Receive shipments and coordinate receiving and delivery logistics including but not limited to using forklifts, pallet jacks, and other critical lift operations utilizing gantry and/or bridge cranes• Responsible for the identification, development, and documentation of critical process mechanisms to improve lab safety operations, manufacturing efficiencies, and build quality. This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.About the teamKuiper Government Solutions (KGS) Engineering is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both space-based and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution, including architecture development, requirements and interface definition through assembly, integration, and test (AI&T). verification, and post-delivery and operational support. BASIC QUALIFICATIONS• Associate’s degree or equivalent in Electronics, Mechanics, Product Design, Manufacturing Technologies, Computer Science, or other STEM discipline• 3+ years relevant high traceability manufacturing experience (Aerospace / Medical, etc.)• 3+ years of hands-on work experience electro-mechanical, opto-electrical, opto-mechanical assembly, final integration and harness integration experience• 3+ years of experience in a fast-paced production environment with Flight Hardware• 3+ years of hand on experience with precision torque, measurement and inspection devices (i.e., automated and manual torque wrenches, calipers, micrometers, profilometers, optical inspection devices, multi-meters, torque wrenches)• 3+ years of experience in board level design verification and test for aerospace, automotive, or consumer electronics products; OR 3+ years of experience building complex test systems• 3+ years of experience developing electronics assembly, manufacturing, and test procedures for electrical product design verification and validation• 3+ years of experience in the use of standard electronic lab test equipment (i.e. network analyzers, oscilloscopes, spectrum analyzers, function generators, multimeters, etc.)• 3+ years of operating heaving machinery, leading critical lift campaigns, operating thermal/thermal vaccum chambers, and operating vibration/dynamic motion systems.• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position• Able to lift-up to 25-lbs. unassisted ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Kuiper Government Solutions Engineering team is a multi-disciplinary technology team involved in developing and delivering targeted and scalable solutions for custom satellite and ground applications. The KGS Engineering team works closely with the core Kuiper team, and addresses the needs of specific customers (such as government agencies). The Senior Mechanical Engineer will play a pivotal role in the team delivering innovative and fast-paced analysis and design for both space and ground systems and sub-systems. The Mechanical Engineer should a background in one or more of the following: space vehicle design, analysis, and electro-mechanical systems integration and test. The ideal candidate has experience making optimization trades for payloads and system architectures. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to convert analytic trade studies to a space qualified payload, while meeting cross discipline requirements. The candidate will have a sharp focus on the specific needs of the customer and be able to conduct or support the thermal and structural analyses to show that proposed solutions will meet the customer’s goals. The successful candidate will have demonstrated experience working on complex programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). The candidate will be able to prepare easy-to-read and technically compelling written reports.Key job responsibilities- Perform mechanical design and layout trade studies for satellite payloads or structures, ground based communication equipment, and test support hardware.- Contributes to the overall system architecture including inputs and requirements from cross discipline teams - Electrical, RF, Optical, Thermal, Dynamics, Mechanisms, Materials, Manufacturing, Assembly, and Test- Perform mechanical design of payloads, structures, electronic enclosures, harnesses, and support equipment- Conduct or support structural and thermal analysis via finite element methods as needed to support design work and to demonstrate that technical solutions will meet the needs and requirements of the customer’s mission and application- Facilitate cost trades on multiple parallel configurations for cost/manufacturability vs design uncertainty- Generate detailed designs via CAD systems and engineering drawings with appropriate geometric dimensioning and tolerancing (GD&T)- Deliver well-written documentation, reports, and presentations for technical design reviews and as part of proposal efforts- Design and support test campaigns, both development and qualification/acceptance, for space hardware.- Interact directly with customers to understand technical requirements, and translate them into technically robust solutions backed by data and analysisSecurity clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain a US Government security clearance of TS/SCI.BASIC QUALIFICATIONS- Basic qualifications- - BSME from ABET accredited university- - 3+ years experience as a mechanical engineer and designer- - 1+ year experience designing electronic enclosures- - Experience with structural engineering analysis methods and tools- - Experience with thermal engineering analysis and tools ...

Project Kuiper is a visionary initiative within Amazon that aims to revolutionize global connectivity through the development of a state-of-the-art Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering high-speed, low latency, internet services to underserved and unserved communities and remote communities around the world. By leveraging cutting-edge satellite technology, we are working towards a future where everyone has access to reliable and high-quality internet connectivity regardless of their location. The Kuiper Government Solutions (KGS) Engineering organization is a multi-disciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.The RF System engineer will engage with an experienced cross-disciplinary team to design, integrate, and test innovative product solutions. The RF System Engineer will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The RF System Engineer must be responsive, flexible, innovative, and able to succeed within a collaborative, fast-paced, and dynamic environment. As a member of the KGS Engineering Integrated Systems Solutions organization, the RF System engineer will be responsible for all aspects of the requirements definition, interface development, integration, test, verification, and validation of one or more of the following: the satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals. This includes testing, analyzing, and optimizing the particular satellite or ground element being developed, and ensuring that it meets the needs of the specific customer and/or target application. Testing efforts include functional and performance testing through various environmental conditions as required to ensure system integrity. Responsibilities also include the design and test of support equipment necessary to enable efficient test execution and requirements verification. The successful candidate will have demonstrated experience leading large-scale programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies).Key job responsibilities• Working within a project team and taking responsibility for a high bandwidth, low earth orbit communications satellite constellation and terrestrial communication technologies• Define requirements, develop interface control documents, and perform requirements derivation and allocation analysis and technical budgets with tools developed to drive designs, correlate models with test data, and develop verification evidence. • Deep-dives into component and subsystem designs to document expectations, evaluate tests, remedy test failures, and provide quick feedback to improve performance• Collaborating with diverse technical teams such as software, mechanical, modem, and compliance teams to validate expectations for system-level and network-level operations, from concept through execution• Integrating the end-to-end RF communications system. Meeting with customers internally and externally to select components• Defining test plans and procedures for lab and RF chamber testing, based on identified requirements for subsystems and for the overall system• Defining test plans and procedures for on-orbit payload verification or satellite testing, based on identified requirements• Analyzing and mitigating potential self-interference and other system interference issues• Implementing, validating, and optimizing RF lab set-ups composed of antenna, measurement equipment, and prototype equipment• Analyzing RF link budget / line-up for test set-ups and for the deployed system• Configuring test equipment for automated operation: satellite link emulator, spectrum analyzer, signal generator, etc.• Meeting with suppliers to select enabling lab technologies• Interpreting test results, troubleshooting issues, performing root-cause analysis for any test failures• Documenting test results, test coverage, and other key performance indicators (KPI) metrics• Communicating status and issues effectively with developers and managers• Shepherding payload subsystems through test campaigns throughout the development lifecycle, from concept to implementation to integration. • Analyze test data and engage with others in Kuiper, customers, suppliers, or partners to evaluate the product performance and provide proactive feedback on potential improvements.This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.”About the teamKuiper Government Solutions (KGS) Engineering is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both space-based and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution, including architecture development, requirements and interface definition through assembly, integration, and test (AI&T). verification, and post-delivery and operational support. BASIC QUALIFICATIONS• Bachelor's degree in engineering, physics, aerospace, or similar field• 5+ years of space vehicle, bus, RF payload, or optical payload integration and test or related industry experience• 5+ years of experience developing space or communication system test requirements, plans, and procedures for system design verification and validation.• 5+ years of RF system engineering or related industry experience• 5+ years of experience in RF design and/or verification with launched products• 4+ years of experience in the use of standard electronic lab test equipment (i.e. network analyzers, oscilloscopes, spectrum analyzers, function generators, multimeters, etc.)• 4+ years of experience developing code in C, C++, Python, Docker, and Rust on Linux platform and experience with industry standard coding practices• Experience with testing satellite communications payloads, optical communications payload, spacecraft bus and constituent subsystems, or space vehicle level. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Kuiper Government Engineering team is a multi-disciplinary technology team involved in developing and delivering targeted and scalable solutions for custom satellite and ground applications. The Government Engineering team works closely with the core Kuiper team, and addresses the needs of specific customers (such as government agencies). The Senior Mechanical Engineer will play a pivotal role in the team delivering innovative and fast-paced analysis and design for both space and ground systems and sub-systems. The Senior Mechanical Engineer will have a background in space based and ground based mechanical design and analysis including electro-mechanical systems integration. The ideal candidate has experience making major optimization trades for payloads and system architectures. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to convert analytic trade studies to a space qualified payload, while meeting cross discipline requirements. The candidate will have a sharp focus on the specific needs of the customer and be able to conduct or direct the thermal and structural analyses to show that proposed solutions will meet the customer’s goals. The successful candidate will have demonstrated experience working on complex programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). The candidate will exhibit the potential to lead small sub-teams of mechanical engineers, and be able to prepare easy-to-read and technically compelling written reports.Key job responsibilities- Perform mechanical design and layout trade studies for satellite payloads or structures, ground based communication equipment, and test support hardware contributing to overall system architecture including inputs and requirements from cross discipline teams - Electrical, RF, Optical, Thermal, Dynamics, Mechanisms, Materials, Manufacturing, Assembly, and Test- Conduct or oversee structural and thermal analysis via finite element methods as needed to support design work and to demonstrate that technical solutions will meet the needs and requirements of the customer’s mission and application- Facilitate cost trades on multiple parallel configurations for cost/manufacturability vs design uncertainty- Generate detailed designs via CAD systems and engineering drawings with appropriate geometric dimensioning and tolerancing (GD&T)- Deliver well-written documentation, reports, and presentations for technical design reviews and as part of proposal efforts- Design and support test campaigns, both development and qualification/acceptance, for space hardware.- Interact directly with customers to understand technical requirements, and translate them into technically robust solutions backed by data and analysisSecurity Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.BASIC QUALIFICATIONS- BSME from ABET accredited university- 8+ years experience as a mechanical engineer and designer- 1+ years experience with structural engineering analysis methods and tools- 1+ years experience with thermal engineering analysis and tools ...

Project Kuiper is a visionary initiative within Amazon that aims to revolutionize global connectivity through the development of a state-of-the-art Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering high-speed, low latency, internet services to underserved and unserved communities and remote communities around the world. By leveraging cutting-edge satellite technology, we are working towards a future where everyone has access to reliable and high-quality internet connectivity regardless of their location. The Kuiper Government Solutions (KGS) Engineering organization is a multi-disciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.The Space System engineer will engage with an experienced cross-disciplinary team to design, integrate, and test innovative product solutions. The Space System Engineer will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The Space System Engineer must be responsive, flexible, innovative, and able to succeed within a collaborative, fast-paced, and dynamic environment. As a member of the KGS Engineering Integrated Systems Solutions organization, the Space System engineer will be responsible for all aspects of the requirements definition, interface development, integration, test, verification, and validation of one or more of the following: the satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals. This includes testing, analyzing, and optimizing the particular satellite or ground element being developed, and ensuring that it meets the needs of the specific customer and/or target application. Testing efforts include functional and performance testing through various environmental conditions as required to ensure system integrity. Responsibilities also include the design and test of support equipment necessary to enable efficient test execution and requirements verification. The successful candidate will have demonstrated experience leading large-scale programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies).Key job responsibilities• Working within a project team and taking responsibility for a high bandwidth, low earth orbit communications satellite constellation and terrestrial communication technologies• Define requirements, develop interface control documents, and perform requirements derivation and allocation analysis and technical budgets with tools developed to drive designs, correlate models with test data, and develop verification evidence. • Deep-dives into component and subsystem designs to document expectations, evaluate tests, remedy test failures, and provide quick feedback to improve performance• Collaborating with diverse technical teams such as software, mechanical, modem, and compliance teams to validate expectations for system-level and network-level operations, from concept through execution• Integrating the end-to-end RF communications system. Meeting with customers internally and externally to select components• Defining test plans and procedures for lab and environmental chamber testing, based on identified requirements for subsystems and for the overall system• Defining test plans and procedures for on-orbit payload verification or satellite testing, based on identified requirements• Analyzing and mitigating potential self-interference and other system interference issues• Configuring test equipment for automated operation: satellite link emulator, spectrum analyzer, signal generator, etc.• Meeting with suppliers to select enabling lab technologies• Interpreting test results, troubleshooting issues, performing root-cause analysis for any test failures• Documenting test results, test coverage, and other key performance indicators (KPI) metrics• Communicating status and issues effectively with developers and managers• Shepherding payload subsystems through test campaigns throughout the development lifecycle, from concept to implementation to integration. • Analyze test data and engage with others in Kuiper, customers, suppliers, or partners to evaluate the product performance and provide proactive feedback on potential improvements.Security Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.About the teamKuiper Government Solutions (KGS) Engineering is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both space-based and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution, including architecture development, requirements and interface definition through assembly, integration, and test (AI&T). verification, and post-delivery and operational support. BASIC QUALIFICATIONS• Bachelor's degree in engineering, physics, aerospace, or similar field• 5+ years of space vehicle, bus, RF payload, or optical payload integration and test or related industry experience• 5+ years of experience developing space or communication system test requirements, plans, and procedures for system design verification and validation.• 5+ years of space system, bus, or payload engineering or related industry experience• 5+ years of experience in space vehicle design and/or verification with launched products• 4+ years of experience in the use of standard electronic lab test equipment (i.e. network analyzers, oscilloscopes, spectrum analyzers, function generators, multimeters, etc.)• 4+ years of experience developing code in C, C++, Python, Docker, and Rust on Linux platform and experience with industry standard coding practices• Experience with testing satellite communications payloads, optical communications payload, spacecraft bus and constituent subsystems, or space vehicle level. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The mission of Project Kuiper’s Government Solutions (KGS) team is to leverage existing Kuiper technology and provide high speed, low latency, and secure satellite broadband services to the United States and our allied government customers.The Senior Power Electronics Engineer will play a pivotal role in the team delivering innovative and fast-paced analysis and design solutions, focusing on satellite and ground system design and analysis as well as on the design of the various communication and control needs (compute, storage, data transfer, etc.) of the power electronics sub-systems. They will be expected to lead a variety of tasks, from schematic design and component selection, circuit analysis and simulation, to layout review and board bring-up and test. They will work across teams and support fellow engineers with design reviews and the preparation of joint reports and proposals. The candidate will have a sharp focus on the specific needs of the customer and be able to conduct trades and analyses to show that proposed solutions will meet the customer’s goals.The successful candidate will have demonstrated experience working on complex programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). The candidate will exhibit the potential to lead small sub-teams of electrical engineers, and be able to prepare easy-to-read and technically compelling written reports.Key job responsibilities- Interact directly with customers to understand technical requirements, and translate them into technically robust solutions backed by data and analysis.- Responsible for electrical circuit design (including digital and analog power) for hosting sensitive RF and communications payloads including processing, memory, and communication buses. - Strong technical background and work experience designing electronic circuits including Analog Power circuits for power and delivery with filtering, voltage/current protection, and IR drop considerations. - Strong technical background and work experience designing electronic circuits including switch mode power supplies (SMPS), buck/boost converter, linear regulators, AC/DC and DC/DC converters.- Analyze designed circuits using software tools for performance and characterization including Power Integrity (PI) and Power Distribution Networks (PDN) on fabricated Printed Circuit Board (PCB) designs.- Identify top level customer requirements and ensure high quality and innovative designs are pursued.- Perform electrical design and layout trade studies for electrical and power sub-systems contributing to overall system architecture including inputs and requirements from cross discipline teams.- Facilitate cost trades on multiple parallel configurations for cost/manufacturability vs design uncertainty.- Deliver well-written documentation, reports, and presentations for technical design reviews and as part of proposal efforts.- Design and support test campaigns, both development and qualification/acceptance, for space hardware.Security Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.A day in the life BASIC QUALIFICATIONS- Bachelor’s Degree in Electrical or Computer Engineering or related discipline, or equivalent experience- 7+ years of experience in hardware development across the full product life cycle (concept to production)- 7+ years of electrical engineering work experience in Space, Aerospace/Defense, Automotive, and/or Communications fields or combination thereof- 7+ years of experience with schematic and layout ECAD tools and with PCB design and debugging ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The mission of Project Kuiper’s Government Solutions (KGS) team is to leverage existing Kuiper technology and provide high speed, low latency, and secure satellite broadband services to the United States and our allied government customers.The Sr Signal Integrity Engineer will play a pivotal role in the team delivering innovative and fast-paced analysis and design solutions, focusing on satellite and ground system design and analysis as well as on the design of the various communication and control needs (compute, storage, data transfer, etc.) of the electronics sub-systems. They will be expected to lead a variety of tasks, from schematic design and component selection, circuit analysis and simulation, to layout review and board bring-up and test. They will work across teams and support fellow engineers with design reviews and the preparation of joint reports and proposals. The candidate will have a sharp focus on the specific needs of the customer and be able to conduct trades and analyses to show that proposed solutions will meet the customer’s goals.The successful candidate will have demonstrated experience working on complex programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). The candidate will exhibit the potential to lead small sub-teams of electrical engineers, and be able to prepare easy-to-read and technically compelling written reports.Key job responsibilities- Responsible for electrical circuit design (including digital and analog power) for hosting sensitive RF and communications payloads including processing, memory, and communication buses. - Strong technical background and work experience designing electronic circuits including Analog Power, Digital Design, Mixed-Signal ADC/DAC, Processors, FPGA, MCU, SoC, Memory, Transceivers, Clock generation and distribution.- Analyze designed circuits using software tools for performance and characterization including Signal Integrity (SI) and Power Integrity (PI) on fabricated Printed Circuit Board (PCB) designs.- Identify top level customer requirements and ensure high quality and innovative designs are pursued.- Perform electrical design and layout trade studies for electrical and power sub-systems contributing to overall system architecture including inputs and requirements from cross discipline teams.- Generate ADS circuit from board and system level to analyze high speed digital, RF, and analog circuits.- Work on the SI/PI model extraction and validation of PCB using 3D/2D EM simulation tools (Cadence PowerSI and Ansys HFSS).- Present SI/PI analysis result to the team and provide layout guidelines for SI/PI. - Execute signal measurement for validation and correlation of simulations.- Work with Electrical HW circuit design team that develops communication systems.- Deliver well-written documentation, reports, and presentations for technical design reviews and as part of proposal efforts.- Design and support test campaigns, both development and qualification/acceptance, for space hardware.Security Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.BASIC QUALIFICATIONS- Bachelor’s Degree in Electrical or Computer Engineering or related discipline, or equivalent experience- 7+ years experience in hardware development across the full product life cycle (concept to production)- 7+ years electrical engineering work experience in Space, Aerospace/Defense, Automotive, and/or Communications fields or combination thereof- 7+ years of experience with schematic and layout ECAD tools and with PCB design and debugging ...

Project Kuiper is a visionary initiative within Amazon that aims to revolutionize global connectivity through the development of a state-of-the-art Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering high-speed, low latency, internet services to underserved and unserved communities and remote communities around the world. By leveraging cutting-edge satellite technology, we are working towards a future where everyone has access to reliable and high-quality internet connectivity regardless of their location. The Kuiper Government Solutions (KGS) Engineering organization is a multi-disciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.The System Integration & Test (I&T) engineer will engage with an experienced cross-disciplinary team to design, integrate, and test innovative space-based and terrestrial applications. The System I&T Engineer will work closely with colleagues throughout Kuiper Government Solutions (KGS) inter-disciplinary teams and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The System I&T Engineer must be responsive, flexible, innovative, and able to succeed within a collaborative, fast-paced, and dynamic environment. As a member of the KGS Engineering Integrated Systems Solutions organization, the System I&T engineer will be responsible for developing the architecture and executing the design, build, and validation of test systems for complex systems and subsystems. The candidate will have the capabilities to develop test procedures, test software, test scripts, APIs, and automation to enable test and verification at various products levels including but not limited to system-on-chip (SoC) calibration algorithm verification, silicon wafer and photonics test, test automation and data analysis for electronics, opto-mechanical/opto-electrical subsystems, and system level tests including environmental tests. The candidate will be responsible for ensuring the test architecture supports all aspects of the integration, test, verification, and validation of one or more of the following: the satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals. This includes testing, analyzing, and optimizing the test support equipment to the particular satellite or ground element being developed. Testing efforts include functional and performance testing through various environmental conditions as required and it will be the candidate’s responsibility to ensure the test systems enable efficient test execution and requirements verification. The successful candidate will have demonstrated experience working on large-scale programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). Key job responsibilities• Provide System Integration and Test leadership to one or more of the following: the satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals.• Provide system-level test design technical expertise to one or more of the following products and services: satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals.• Specify and develop end-to-end payload or sub-system integration and test plans and procedures to validate performance against customer and/or partner requirements• Create test algorithms, test scripts, and calibration routines as part of performing lab and field evaluation of integrated satellites, bus, payloads or sub-systems• Analyze system and subsystem test data and engage with cross functionally with teammates, partners, suppliers, or customers to evaluate the product performance and provide proactive feedback on potential improvements.• Architect, design, and validate mechanical, optical, and electrical support equipment necessary to enable test execution and requirements verification• Prepare reports documenting test results, test coverage, performance results and other key performance indicator (KPI) metrics, and communicate issues effectively with developers and managers• Effectively manage and track to closure test anomalies, defects, and bugsSecurity Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.About the teamKuiper Government Solutions (KGS) Engineering is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both space-based and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution, including architecture development, requirements and interface definition through assembly, integration, and test (AI&T). verification, and post-delivery and operational support. BASIC QUALIFICATIONS• Bachelor's degree in engineering, physics, aerospace, or similar field• 8+ years of space vehicle, bus, RF payload, or optical payload integration and test or related industry experience• 8+ years of experience developing space or communication system test requirements, plans, and procedures for system design verification and validation.• 6+ years of experience developing code in Matlab, LabVIEW, Python, Docker, Rust on Linux platforms and experience with industry standard coding practices• Experience with testing satellite communications payloads, optical communications payload, spacecraft bus and constituent subsystems, or space vehicle level. ...

Project Kuiper is Amazon’s initiative to launch a constellation of 3,236 Low Earth Orbit (LEO) satellites to provide high-speed, low-latency broadband connectivity to unserved and underserved communities globally. Join our mission to close the digital divide and connect people, businesses, and governments in places where reliable connectivity has been a challenge.We are breaking new ground with every device we design, from custom silicon to secure software, to enable innovative satellite and ground systems. Be part of a team that pushes the boundaries of satellite communications technology to make global connectivity a reality.As a Senior Device Software Development Engineer on the Kuiper Government Solutions (KGS) team, you will design and develop embedded software for Kuiper’s satellite and ground systems. You’ll work on fault-tolerant, real-time platforms, collaborating closely with hardware, systems, and product teams to deliver secure, reliable, and high-performance solutions.This is a unique opportunity to shape the next generation of space-based communication systems with minimal legacy constraints. Your work will directly support critical government initiatives, enabling secure and high-performance communication systems for U.S. and allied missions.This role is based in Northridge or El Segundo, CA, or Redmond, WA, with U.S. relocation benefits. Onsite work is required 5 days a week.Key job responsibilities• Design, develop, and optimize embedded software for Kuiper’s satellite and ground terminal systems, focusing on fault-tolerant, real-time platforms.• Leverage modern application frameworks for Embedded Linux and RTOS platforms to develop scalable, modular, and high-performance software.• Implement and integrate software for data processing, device control, and networking protocols (e.g., TCP/IP, UDP).• Develop low-level drivers for peripherals and interfaces, including I2C, SPI, PCIe, UART, and GPIO.• Collaborate with hardware teams to support board bring-up and integration testing.• Drive security initiatives, including bootloaders, cryptography, and secure Software Development Lifecycle (SDLC) practices.• Debug and resolve complex hardware-software integration issues using tools like logic analyzers and oscilloscopes.• Collaborate with cross-functional teams to ensure seamless hardware-software interaction and system reliability.• Mentor junior engineers, conduct design reviews, and uphold high software quality standards. This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.About the teamKuiper Government Solutions (KGS) is a multidisciplinary team developing targeted and scalable solutions for custom satellite and ground applications. KGS Device Software focuses on embedded software solutions for custom products supporting U.S. and allied government customers. We collaborate closely with hardware and systems teams to deliver secure, high-performance solutions for mission-critical applications.BASIC QUALIFICATIONS- Bachelor's degree in computer science or equivalent- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 4+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team- 3+ years of programming experience in C, C++, or Rust for resource-constrained systems- Proficiency in debugging, optimization, and hardware-software system integration- Excellent written and verbal communication skills ...

Project Kuiper is Amazon’s initiative to launch a constellation of 3,236 Low Earth Orbit (LEO) satellites to provide high-speed, low-latency broadband connectivity to unserved and underserved communities globally. Join our mission to close the digital divide and connect people, businesses, and governments in places where reliable connectivity has been a challenge.We are breaking new ground with every device we design, from custom silicon to secure software, to enable innovative satellite and ground systems. Be part of a team that pushes the boundaries of satellite communications technology to make global connectivity a reality.As a Senior Embedded Software Development Engineer on the Kuiper Government Solutions (KGS) team, you will design and develop embedded software for Kuiper’s satellite and ground systems. You’ll work on fault-tolerant, real-time platforms, collaborating closely with hardware, systems, and product teams to deliver secure, reliable, and high-performance solutions.This is a unique opportunity to shape the next generation of space-based communication systems with minimal legacy constraints. Your work will directly support critical government initiatives, enabling secure and high-performance communication systems for U.S. and allied missions.This role is based in Northridge, CA, or Redmond, WA, with U.S. relocation benefits. Onsite work is required 5 days a week.Key job responsibilities• Design, develop, and optimize embedded software for Kuiper’s satellite and ground terminal systems, focusing on fault-tolerant, real-time platforms.• Leverage modern application frameworks for Embedded Linux and RTOS platforms to develop scalable, modular, and high-performance software.• Implement and integrate software for data processing, device control, and networking protocols (e.g., TCP/IP, UDP).• Develop low-level drivers for peripherals and interfaces, including I2C, SPI, PCIe, UART, and GPIO.• Collaborate with hardware teams to support board bring-up and integration testing.• Drive security initiatives, including bootloaders, cryptography, and secure Software Development Lifecycle (SDLC) practices.• Debug and resolve complex hardware-software integration issues using tools like logic analyzers and oscilloscopes.• Collaborate with cross-functional teams to ensure seamless hardware-software interaction and system reliability.• Mentor junior engineers, conduct design reviews, and uphold high software quality standards.Security Clearance : This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.About the teamKuiper Government Solutions (KGS) is a multidisciplinary team developing targeted and scalable solutions for custom satellite and ground applications. KGS Device Software focuses on embedded software solutions for custom products supporting U.S. and allied government customers. We collaborate closely with hardware and systems teams to deliver secure, high-performance solutions for mission-critical applications.BASIC QUALIFICATIONS- Bachelor's degree in computer science or equivalent- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 4+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team- 3+ years of programming experience in C, C++, or Rust for resource-constrained systems- Proficiency in debugging, optimization, and hardware-software system integration- Excellent written and verbal communication skills ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Kuiper Government Solutions team is a multi-disciplinary technology team involved in developing and delivering targeted and scalable solutions for custom satellite and ground applications. The Solutions Engineering team works closely with the core Kuiper team, and addresses the needs of specific customers (such as government agencies). The Senior RF/Microwave Engineer will play a pivotal role in the team delivering innovative and fast-paced analysis and design solutions. The Senior RF/Microwave Engineer will be a member of the Solutions Engineering team, focusing on satellite system level analysis and the design of the various RF and Microwave circuit blocks in the range of Ka/K bands. They will be expected to lead a variety of tasks, from RF board design and component selection, to layout review and board bring-up and test. They will work across teams and support fellow engineers with design reviews and the preparation of joint reports and proposals. The candidate will have a sharp focus on the specific needs of the customer and be able to conduct trades and analyses to show that proposed solutions will meet the customer’s goals.The successful candidate will have demonstrated experience working on complex programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). The candidate will exhibit the potential to lead small sub-teams of RF/Microwave engineers, and be able to prepare easy-to-read and technically compelling written reports.Key job responsibilities- Interact directly with customers to understand technical requirements, and translate them into technically robust solutions backed by data and analysis- Responsible for implementation of RF wireless system and physical layer performance of multiple wireless components- Responsible for designing RF and communications payloads on a commercial bus and terrestrial ground terminals - Identify top level customer requirements and ensure high quality and innovative designs are pursued- Develop RF link budget, frequency planning, filter requirements definition, and RF test validation plans- Perform RF design and layout trade studies for satellite RF and Microwave sub-systems in the Ka/K range; contributing to overall system architecture including inputs and requirements from cross discipline teams (Mechanical, Electrical, Mechanisms, Materials, Manufacturing, Assembly, and Test)- Facilitate cost trades on multiple parallel configurations for cost/manufacturability vs design uncertainty- Deliver well-written documentation, reports, and presentations for technical design reviews and as part of proposal efforts- Design and support test campaigns, both development and qualification/acceptance, for space hardware- Utilize RF analysis tools including ADS, HFSS, MO, and SystemVueThe role is located in Northridge, CA, and includes US relocation benefits.Security Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.About the teamKuiper Government Solutions is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.This role is responsible for designing, building out, and maintaining critical APIs and interfaces to link Kuiper capabilities to US Government customers such as NASA, DoD, and other National Security customers. You will develop forward-looking software services for mission critical space safety and sustainability applications which will automatically coordinate with external systems and organizations rapidly, reliably, and at scale. Key job responsibilitiesIn this role you will:- Utilize network topology understanding and Software Defined Networking / network operations experience to interface with the Kuiper network team to develop APIs and other enabling interface software to meet unique customer needs- Demonstrate the capabilities of the interfaces and architectures you define in a simulated test environment you help develop- Solve complex technical problems related to the use of the Kuiper constellation for government customers as part of a multi-disciplinary team- Lead internal and vendor teams to develop and deliver on software and interface requirements- Ensure systems meet Kuiper and US Government performance needs including availability, reliability, upgradeability, interoperability, and security requirements- Effectively communicate project health, risks and issues to stakeholders and management teams- Escalate urgent issues appropriately and drive them to closure in a timely manner- Provide visualizations, document results, and communicate them across multi-disciplinary project teams.The role is located in Redmond, WA, and includes US relocation benefits.Security Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.About the teamThe Kuiper Solutions Engineering team is a multi-disciplinary technology team involved in developing and delivering targeted and scalable solutions for custom satellite and ground applications, including United States and allied government customers. BASIC QUALIFICATIONS- 7+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team ...

In this role, you will work directly with government customers, engineering teams, and operational stakeholders to execute and document strategies to provide KGS with optimal suppliers, pricing, flexibility, quality, and delivery performance. In addition, this role will oversee the delivery logistics on a global scale to include inventory and property management of both Government and commercial assets. You will work in a collaborative, analytical, and fast-paced environment and must be comfortable interacting with highly technical cross-functional teams. The candidate must have strong business judgment, dive deep into data, and be comfortable with processing tactical actions such as on-boarding vendors. Candidates must be able to Multi-task different business operation tasks within Amazon, commercial industry partners, and Government customers. The best candidates will have deep understanding of prioritization and task completion. Key job responsibilities• Oversee the tactical implementation of KGS’s supply chain risk management plan. • Develop sourcing and negotiation strategies that deliver against business objectives and achieves sustainable relationships with suppliers.• Own KGS vendor management. Develop spend strategies, identify potential suppliers, analyze supplier capabilities, select suppliers and determine prices, terms, and conditions of agreements; including managing daily purchasing activities to enable efficient and timely execution of engineering design, build, and test activities• Work with engineers on procurement strategy and Bill of Materials to ensure preferred vendor selection in accordance with customer requirements.• Be responsible for execution and review of the KGS Business System modules for logistics, inventory, and property management.• Be a business partner to Professional Services leadership team and executives, providing insights to help shape the strategy of the business• Provide strategic guidance to area leadership teams, bringing deep knowledge of supply chain processes, logistics, inventory and property management best practices.This position is in Northridge, CA. Some travel, both domestic and international, will be required.Security Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.BASIC QUALIFICATIONS- At least 5 years of MRP (Materials Requirements Planning) and/or inventory management experience required- Bachelor's degree and 12+ years working in operational supply chain management and/or logistics management- At least 5 years experience with delivering on Supply Chain and Property via FAR/DFAR requirements.- At least 5 years experience preparing and delivering state of the business documents and presentations.- At least 5 years demonstrating the ability to execute and document business operations. Track, document, and enforce compliance procedures. ...

Project Kuiper is a visionary initiative within Amazon that aims to revolutionize global connectivity through the development of a state-of-the-art Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering high-speed, low latency, internet services to underserved and unserved communities and remote communities around the world. By leveraging cutting-edge satellite technology, we are working towards a future where everyone has access to reliable and high-quality internet connectivity regardless of their location. The Kuiper Government Solutions (KGS) Engineering organization is a multi-disciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.The System Integration & Test (I&T) engineer will engage with an experienced cross-disciplinary team to design, integrate, and test innovative space-based and terrestrial applications. The System I&T Engineer will work closely with colleagues throughout Kuiper Government Solutions (KGS) inter-disciplinary teams and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The System I&T Engineer must be responsive, flexible, innovative, and able to succeed within a collaborative, fast-paced, and dynamic environment. As a member of the KGS Engineering Integrated Systems Solutions organization, the System I&T engineer will be responsible for developing the architecture and executing the design, build, and validation of test systems for complex systems and subsystems. The candidate will have the capabilities to develop test procedures, test software, test scripts, APIs, and automation to enable test and verification at various products levels including but not limited to system-on-chip (SoC) calibration algorithm verification, silicon wafer and photonics test, test automation and data analysis for electronics, opto-mechanical/opto-electrical subsystems, and system level tests including environmental tests. The candidate will be responsible for ensuring the test architecture supports all aspects of the integration, test, verification, and validation of one or more of the following: the satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals. This includes testing, analyzing, and optimizing the test support equipment to the particular satellite or ground element being developed. Testing efforts include functional and performance testing through various environmental conditions as required and it will be the candidate’s responsibility to ensure the test systems enable efficient test execution and requirements verification. The successful candidate will have demonstrated experience working on large-scale programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). Key job responsibilities• Provide System Integration and Test leadership to one or more of the following: the satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals.• Provide system-level test design technical expertise to one or more of the following products and services: satellite bus, RF payloads, optical payloads, custom ground terminals, or custom user terminals.• Specify and develop end-to-end payload or sub-system integration and test plans and procedures to validate performance against customer and/or partner requirements• Create test algorithms, test scripts, and calibration routines as part of performing lab and field evaluation of integrated satellites, bus, payloads or sub-systems• Analyze system and subsystem test data and engage with cross functionally with teammates, partners, suppliers, or customers to evaluate the product performance and provide proactive feedback on potential improvements.• Architect, design, and validate mechanical, optical, and electrical support equipment necessary to enable test execution and requirements verification• Prepare reports documenting test results, test coverage, performance results and other key performance indicator (KPI) metrics, and communicate issues effectively with developers and managers• Effectively manage and track to closure test anomalies, defects, and bugs; Debug, root-cause, and make continuous improvements of control systems in a high-rate production environmentThis position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.”About the teamKuiper Government Solutions (KGS) Engineering is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both space-based and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution, including architecture development, requirements and interface definition through assembly, integration, and test (AI&T). verification, and post-delivery and operational support. BASIC QUALIFICATIONS• Bachelor's degree in engineering, physics, aerospace, or similar field• 5+ years of space vehicle, bus, RF payload, or optical payload integration and test or related industry experience• 5+ years of experience developing space or communication system test requirements, plans, and procedures for system design verification and validation.• 4+ years of experience developing code in Matlab, LabVIEW, Python, Docker, Rust on Linux platforms and experience with industry standard coding practices• Experience with testing satellite communications payloads, optical communications payload, spacecraft bus and constituent subsystems, or space vehicle level. ...