Amazon Kuiper Manufacturing Enterprises LLC

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. In this position, you will be a valued member of payload network team designing and developing network stack (routing, forwarding, control, data and distribution planes) for an end-to-end system of satellites, interchanges, ground gateways & customer terminals.Key job responsibilities* Take responsibility for designing and delivering a modern, flexible, high throughput, low latency data distribution network protocol architecture spanning space and ground segments.* Lead and implement custom routing and L2 control data distribution protocols that incorporate mission critical network security, quality of service and dynamic communications infrastructures for best-in-class network services that delight our customers.* Develop flexible and cost-effective inter-networking solutions in support of connecting and peering with other public and private networks.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a software engineer you will be responsible for the design of embedded software used in the Project Kuiper products. You will work in a collaborative environment with teams inside and outside of Amazon. You will work in a team of software engineers on best practices while you guide your software designs from requirements gathering through mass production. You will need to be flexible and responsive to high priority issues.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to increase global broadband access through a constellation of over 3,000 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Kuiper Electronic Supply Chain team is seeking a Senior Manager to lead our Operations Technical Program Management (OPM) team. This team is responsible for technical manufacturing and procurement operations across the supply base for Printed Circuit Board Assemblies (PCBA) destined for our satellites. The successful candidate will solve for the long-term needs of the supply base while remaining deeply engaged in the management of daily product delivery.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities- Lead, coach, and develop a team of Operations Program Managers- Ensure hardware is delivered to support production schedules identifying, tracking, and resolving risks to delivery with cross functional teams as necessary- Protect future deliveries through detailed and proactive evaluation of supplier production lines for capacity and manufacturing quality- Report status to senior leadership in a clear and succinct manner- Develop and implement best practices within the team while ingesting and replicating best practices from other teams- Lead team to execute annual improvement plansBASIC QUALIFICATIONS- 7+ years of technical product or program management experience- 10+ years of direct working experience with engineering teams - Demonstrated experience in hiring and developing high-performing teams- Experience managing programs across cross functional teams, building processes and coordinating release schedules- Deep technical understanding of PCB manufacturing processes, materials, and quality requirements for space-grade electronics- Demonstrated ability to use data and metrics to back up assumptions and evaluate outcomes.- Ability to roll up sleeves and operate as an individual contributor to get the job done; at the same time be able to guide the team- Ability to handle multiple competing priorities in a fast-paced environment- Ability to travel domestically and internationally as required ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilitiesAs the Senior Manager of HW Wireless HW Development and Test, you will help to build and supervise a team of experts in antenna prototyping and test for both R&D and production phases.In this role, you will be overseeing the following:- Develop over the air test infrastructure including anechoic chambers and robotic nearfield scanners- Develop prototyping capability including equipment, SW tools, rework stations, inspection cameras- Build and test prototypes in support of R&D efforts- Conduct test and verification on HW at different stages of the product cycle, generate test reports and provide analysis on the results in support of different development and production activities- Develop post processing algorithms and tools in support of antenna, RF and electrical test- Develop the technology solutions, define and execute products and test infrastructure for upcoming generations of Kuiper's wireless technology- Develop planning and resource management systems in support of HW test at scaleThis is a highly visible role with several internal customers, a sizeable body of full time and/or contingent staff, a very large facility that hosts highly advanced test systems. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- Partner with recruiting team, interview candidates, onboard new hires- Work with their team to develop infrastructure for testing- Direct/lead internal team on the development of the infrastructure for satellite production About the teamThe team under this Sr Manager role will be a mix of Antenna designers, SW developers architects and HW developers.BASIC QUALIFICATIONS· MS degree in electrical engineering, with coursework and/or research work on antennas or RF/Microwave, or equivalent experience · 10+ years of experience in development and/or research experience in antenna, RF systems, or DSP development · 5+ years of experience in technical and/or team leadership · 5+ years of experience in antenna/RF testing · 2+ years of leading software development in support of test or calibration ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. As a 1st shift back end Maintenance Supervisor, you will be engaged in installing, commissioning, and maintaining specialty equipment with the ultimate goal of supporting satellites from the stages of early testing, integration, through to launch and on to production stability. You will maintain complex mechanical, electrical and vacuum chambers to ensure their efficient operations and reliable testing. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to ensure that critical needs and demands on second shift are being met. You will be essential in the on-time delivery of hardware capable of achieving mission success as you are directly responsible for all equipment supporting these functions, and will have broad scope and autonomy to fill all gaps between equipment concept and operations. You will work closely with your first shift team members to ensure critical pass downs and communications are being provided daily. You will lead the charge to develop, improve, review and maintain the preventative maintenance program while ensuring appropriate procedures in place to supporting spacecraft testing and builds. This shift is scheduled for Wednesday through Sunday, 6 am to 4:30 pm.Key job responsibilities- Hands on installation of mechanical systems, electrical sub-systems, and troubleshooting related to a variety of manufacturing equipment - Develop, design, and implement solutions to difficult problems with a sense of urgency - Establish preventative maintenance programs from concept to implementation - Maintain the operation of equipment and systems in the areas of responsibilities such as: Compressed air, electrical distribution, TVAC, thermal chambers, shock and vibe test equipment - Manage internal and external maintenance technicians - Coordinate, schedule and manage multiple projects while meeting tight deadlines - Ensure all environmental, health safety procedures are followed by onsite personnel - Work across teams to develop clear and concise project details for mechanical, electrical, and machine functionality requirements allowing for expedient installations leading to successful operations - Coordinate with engineering, operations, contractors, and maintenance teams to define design facility requirements for specialty equipment during initial stages of design through completion of installation - Establish effective relationships with teams across the program - Develop an understanding of local permit processes - Manage critical spare parts budgets for K.E.G. as equipment is being defined, installed and operated.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamThe Kuiper Equipment Group supports the Space Simulation and Manufacturing teams by installing, commissioning, and maintaining equipment that will provide screening and testing of satellite hardware. The lab has the capability to perform testing in the R&D, Proto-Flight, Qualification and Flight test phases. This will be done utilizing equipment in the lab such as electrodynamic shakers, thermal vacuum chambers, thermal cycling chambers and other equipment to simulate the space environment while assuming responsible for assembly, integration, and test of satellite hardware and the associated equipment and facility definition required to achieve production rates.BASIC QUALIFICATIONS- 5+ years of industrial engineer, operations engineer, manufacturing engineer, or project engineer in a manufacturing environment experience ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Have you wanted an opportunity to develop the software applications and services for an advanced global internet connectivity service? The Kuiper Ground Gateway Services team is responsible for the software and services that operate on ground gateways and terminals. This team oversees the development of architecture, solutions, and a roadmap for managing embedded systems within antennas, as well as applications for site maintenance, telemetry, over-the-air updates, and various other features. As the Software Development Manager of this team, you will guide a group of engineers in addressing these challenges, while also focusing on team development and upholding a high standard for delivery quality.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities Recruit and develop top talent to achieve the team's objectives. Establish and steer the team's long-term vision. Manage resource allocation to meet both business objectives and career development targets. Participate in strategic planning to achieve technical and business goals. Collaborate closely with engineers to design and implement optimal technical designs and strategies. Ensure project timelines are met, prioritizing tasks and managing team workload effectively. Foster a culture of innovation and continuous improvement within the team. Maintain close collaboration with cross-functional teams to align software development with overall company goals. Monitor and ensure adherence to quality standards and best practices in software development. Provide regular performance feedback and career development guidance to team members.BASIC QUALIFICATIONS- 3+ years of engineering team management experience- 7+ years of engineering experience- 8+ years of leading the definition and development of multi tier web services experience- Knowledge of engineering practices and patterns for the full software/hardware/networks development life cycle, including coding standards, code reviews, source control management, build processes, testing, certification, and livesite operations- Experience partnering with product or program management teams ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilitiesAs a Mission Operations Manager you will own the overall operational success of the Kuiper mission. You will be responsible for execution and optimization of operations at a constellation at scale. Your team will own the direct interfaces to the constellation and coordination with constellations operations customers within Kuiper engineering teams. Because of the scale of the mission, you will be focused on driving automation and operational excellence — identifying areas of improvement and initiating changes to improve the productivity of the fleet.You will coordinate and prepare for each launch and on-orbit demonstration, design and conduct operational rehearsals, and drive automation efforts with scalability in mind, ensuring that the constellation functions at peak performance with no manual intervention. You will lead launch and early operations, develop and perform analysis on system data, and identify areas and mechanisms for further improvement.The ideal candidate will be detail oriented, have strong verbal and written communication skills, strong organizational skills, able to juggle multiple tasks at once, able to work independently, and maintain professionalism under pressure. You should have knowledge in space system design and software engineering practices. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeYou will work with internal engineering teams to define our operational process. You will identify opportunities to optimize and automate, and work with software and hardware teams to implement. You will be responsible for the operational success of the Kuiper mission.About the teamProject Kuiper Ground Software team owns the infrastructure that manages and operates the constellation, providing a stable foundation for the networking team to run customer-facing connectivity service.BASIC QUALIFICATIONS- - BS degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Computer Science or related discipline.- - 5+ years of experience in the Aerospace industry.- - 3+ year of prior experience in a spacecraft operations or direct support role- - 2+ years of experience programming with at least one modern language such as C++, C#, Java, Python, Golang, Rust, Matlab- - Technical understanding of space system architecture and subsystem functionality ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. As SW Engineer for antenna systems, you will collaborate with systems architects, HW engineering design teams & FW/SW design teams to bring up and test systems combining FPGA, firmware, RF, and networking functions and will help to build advanced tools for the following: - Characterizing subsystems and systems related to antennas - Complex data storage - HW test automation- FW design and implementation - Application development - Design automation for 2D and 3D structures - Develop bring up tools and scripts for phased array systemsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Project Kuiper is seeking a Production Supervisor to join the Space Simulation Test Lab to support production. This role will work closely with management to supervise a technician team that supports environmental test or satellite components as well as full vehicle testing. The individual will have strong leadership skills and be required to work on multiple projects in a fast-paced environment where communication and organization will be critical. This position will also utilize a variety of analytical tools as well as aid in creating a variety of laboratory procedures which they will help to draft and maintain. This will require supervisory duties as well as working as an operator in the test lab. Key job responsibilities- Test sub assemblies and vehicle in development and production environment. - Supervise a team of technicians focused on early production and scaling output.- Work with management to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.- Work cross-functionally with management, facilities, and supply chain to maintain operations and materials the Space Simulation Test Lab- Ability to provide timely feedback on designs, processes, and custom equipment used in routine prototyping, fabrication, and characterization.- Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.- Review and approve rework to ensure accuracy and enforce traceability.- Comply with all Company Policies including Health, Safety, and Environmental Regulations, Personal Protective Equipment Requirements, and Standard Operating Procedures.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeA Production Supervisor in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite. You will have to be comfortable in a high paced environment and be able to multitask while still being able to produce high quality work. You will be leading a group of technicians expected to test and deliver hardware at a high rate while maintaining quality. You will be working to constantly improve processes that will make impacts on the efficiency of the lab. You will also play a key role in the career growth of technicians on your team. BASIC QUALIFICATIONS- 2+ years’ experience in Clean Room Manufacturing environment.- 2+ years’ experience of supervisory experience.- 2+ years’ experience in Environmental Test.- 4+ Experience manufacturing in high traceability environment ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We’re working on the future. If you are seeking an iterative, fast-paced environment where you can drive innovation, apply state-of-the-art technologies to solve challenging real world challenges, and provide visible benefit to end-users, this is your opportunity. Come work at Amazon!The Role:We're looking for a Mechanical Designer who combines superb 3D CAD capabilities with a demonstrated ability to get the right work done quickly and effectively. This person must have experience working in a multidisciplinary environment and producing top notch CAD designs. This person must be comfortable working with large databases with complex constraints.Key job responsibilities - Creation, iteration and management of CAD designs for large system databases - Manage the creation, checking, issuing and revisions of drawings for parts / assemblies - Manage CAD BOM through product lifecycle management system - Work with a team of engineers across multiple disciplines (mechanical, thermal, electrical, structural, manufacturing, metrology, tooling, assembly, test) in the ideation and creation of system concepts - Engage with suppliers and vendors as needed for CAD definition of sourced components/systems - Work with procurement and sourcing in identification and review of manufacturing sources Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor's degree in Mechanical Engineering, Electrical Engineering, related field OR equivalent experience - 3+ years CAD experience in complex mechanical / electro-mechanical assemblies/ machines/ structures/ systems using NX - 1+ years developing, manipulating, iterating and optimizing mechanical designs with complex interactions / constraints - 1+ years of interfacing with a range of engineering disciplines, and understanding the scope of those inputs and requirements ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Innovation is part of our DNA! Our goal is to be Earth's most customer centric company, and we are just getting started.Key job responsibilities- Develop embedded software in Rust, C, C++, or other modern languages.- Write device drivers and system applications for the various satellite systems.- Write software to interact with micro-controllers- Work closely with other software and hardware teams to support board bring-up and integration testing.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeCome work at Amazon! We need people who want to join an ambitious space program that continues to push the state of the art in space-based systems design. Come help us solve the difficult and rewarding development challenges in building highly reliable, power efficient and low-cost satellite avionics! About the teamOur team tackles many critical satellite functions including power management, hardware interfaces, command & telemetry, and autonomous control. We are looking for an outstanding software engineer to participate in all phases of software development from requirements through implementation and test to operations. BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. THE ROLE Have you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role is for a Senior Software Development Engineer who will lead the design, architecture and implementation of Customer Engagement Systems. Our team owns developing the architecture, solutions and roadmap for managing the customer life cycle for global ISP services; for example identity and account management, subscriber management services, user provisioning, billing and payments, customer and technical support tools, offer management tools, and customer metrics and analytics. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilitiesJOB RESPONSIBILITIES · Design and implement Telecom Applications and Services. · Partner with the Product, UX and peer engineering teams. · Drive Kuiper Customer Experience Systems application and data architecture.BASIC QUALIFICATIONS- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team ...

This is a program for Active-Duty Military Members and Military Spouses through Hiring our Heroes (HoH) Corporate Fellowship. Completing this application will increase visibility of your candidacy for permanent placement at Amazon; however, is NOT a guarantee you will be screened or provided an offer.Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilities- Design and Implement Telecom Components, Applications and Services - Partner with the Satellite, Networks and Security engineering teams- Design components, services, and relevant data modelsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role is for a Software Development Engineer who will design, build, and maintain components and services of Project Kuiper's Customer Engagement Systems and interact with the core Kuiper Network. About the teamOur team owns developing the architecture, solutions & roadmap for managing the customer lifecycle for telecom services; for example identity and account management, subscriber management services, user provisioning, billing and payments, customer and technical support tools, offer management tools, and customer metrics and analytics.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language- Must be an U.S. Military member with 180~ days of time in service remaining or an employment ready military spouse- Must be an approved candidate for Hiring our Heroes (HOH) 25-1 Cohort ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesIn this role you will:· Work closely with the system architects to develop world-class SOC and IP blocks, which meet power, area and performance targets.· Define, configure and integration SoC Subsystems· Contribute to the SoC floor planning effort· Define and develop any necessary support logic· Configure, instantiate and integrate 3rd party IP blocks· Understand low power design & the impact of DFT on the blocks· Perform initial synthesis & timing analysis· Assist verification team in unit verification including test plan development· Assist with debug and bring-up About the team BASIC QUALIFICATIONS· Bachelor's degree in Electrical / Communications Engineering or related field, or equivalent experience · 7+ years of experience in digital design, preferably in SoC design and implementation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Our team focuses on building enterprise and consumer grade Customer Terminals, for use by our customers to access internet through the Project Kuiper.We are looking for an embedded Software Development Engineer to own, design and develop Customer Terminal system software for Project Kuiper, using embedded Linux, and custom Silicon. Kuiper is breaking new ground with every device we design, and you will be an integral part of bringing this family of products to customers.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesDevelop embedded software for Customer Terminal devices within the Project Kuiper system.Participate in all phases of SDLC including requirements gathering, design, code, test, and code/test coverage.Developing embedded software in assembly, C, C++, Rust or other languagesHave in-depth knowledge with real-time embedded software philosophies and practicesHave expertise with Linux and RTOSReview schematics, logic analyzer, and embedded software (bare-metal) trouble-shooting techniquesFamiliarity with cryptography, threat modeling, and secure SDLC, TrustZone, bootloader.Develop embedded software in C, C++, Rust, or other modern languages.Write drivers for peripherals and interfaces such as I2C/I3C, SPI, UART, GPIO etc.Work closely with hardware teams to support board bring-up and integration testing.A day in the lifeYou will be on a team of embedded SDEs responsible for leading the design of embedded software used in the Project Kuiper customer terminal products. You will work in a collaborative environment with teams inside and outside of Amazon. You will help mentor a team of software engineers on best practices while you help guide software designs from requirements gathering through mass production.About the teamThe Kuiper Customer Terminal Software Team supports the devices that connect our customers to the Kuiper network. We provide software for both applications and the underlying Linux systems. We work hand in hand with hardware, product and operations teams to deliver a great experience for our customers.BASIC QUALIFICATIONS- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering team ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Lead and guide a team of Integration & Test Technicians by planning, assigning and executing daily tasks, and assisting with new member onboarding and training- Perform functional and environmental testing, repair and troubleshooting of Kuiper phased array antennas and other critical assemblies- Enforce high quality and safety standards for both product and personnel- Produce daily reports on Integration phased array antenna builds- Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers- Read, create and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions, some of which may be ambiguous or incomplete in nature- Use computer software programs for conducting tests- Check and inspect your work, as well as others, after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements- Collaborate with manufacturing, design and test engineers to develop, document and complete activities, including continuous improvement opportunities- Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environmentExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lead Integration & Test Technician is responsible for guiding a team of test technicians to test and troubleshoot Kuiper phased array antennas. This team will work closely with cross-functional engineering, test, quality and operations teams to deliver Kuiper production hardware at the final integration and testing level, prior to launch. This position requires skill and experience in a variety of areas, including PCBA testing and handling, mechanical assembly, avionics integration, electrical checkouts and environmental testing. You will be responsible for ensuring critical tasks to test Kuiper phased array antennas are performed with high quality, high workmanship and safety standards, and on time.BASIC QUALIFICATIONS- High school diploma, GED or equivalent experience- 4+ years experience in electrical hardware assembly, test, and/or installation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of over 3,000 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Project Kuiper team is looking for a Technical Program Manager to own the technical requirements between the satellite, dispenser, and launch vehicles to provide an integrated system for launch. The role will interface with cross-functional engineering and program/product management teams to define mission configurations and verify multiple launch vehicle and mission requirements sets, interface with launch vehicle and dispenser system providers, and interface with internal stakeholders delivering satellites to the launch site. The role will perform launch vehicle and dispenser interface management; launch systems integration; configuration management; requirements definition, management, and verification for complex multi-manifest launches. This role reports directly to the Head of Mission Management.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Define and manage internal and external interface requirement sets for satellites, satellite dispensers, and launch vehicles. Identify requirement gaps between systems and work with internal and external stakeholders to gain alignment.• Manage verification artifact generation, review, and approval for Kuiper hardware and dispenser and launch vehicle providers.• Define payload configurations based on launch vehicle requirements and capabilities, satellite and dispenser readiness, and mission timelines. • Collaborate with stakeholders to identify, assess, and manage technical and programmatic risks to ensure timely and successful deployment of the Kuiper constellation. • Work with satellite subsystems product/program management to ensure that Range Safety compliance is met. • Coordinate with the design and integration teams to ensure successful spacecraft to launch vehicle integration and resolve any technical challenges. • Scale solutions and processes across a suite of launch vehicles to optimize launch opportunities and drive efficiencies across the Kuiper program• Collaborate with partner organizations to prepare and deliver test procedures, tracking all activities and ensuring readiness for launch.A day in the lifeYou will support multiple missions with multiple launch providers in parallel defining and managing interfaces, requirements, and payload configurations. For each mission and launch vehicle you will work with mission managers and dispenser and satellite engineering teams to define and approve interface requirements, develop mission configurations consistent with these interface requirements and mission schedules, and generate and review verification artifacts in preparation for launch.Work with a team of professional, experienced, space enthusiast Mission Managers to provide an efficient launch cadence to meet Kuiper production rates. Collaboration with various teams in Kuiper is essential as we strive to innovate and make launch as routine as boarding a passenger flight.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.BASIC QUALIFICATIONS- Bachelor's degree in Mechanical, Aerospace, Astronautical Engineering or related field and 7+ years of relevant experience.- 5+ years experience with requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principles in the launch industry.- Ability to communicate clearly and effectively with engineers, key vendors, and senior business leaders.- Practical knowledge of engineering principles and practices.- Demonstrated strong ownership, urgency to drive projects to closure, and desire to learn in a dynamic environment with minimal direction- Ability to pass Kennedy Space Center background checks- Ability to obtain and maintain a US Passport- Ability and willingness to comply with the Government of French Guiana which mandates that travelers receive vaccinations for yellow fever or applicable government exemption- With or without reasonable accommodations, must be able to lift up to 49 pounds on some occasions, stand/walk for up to 8-10 hours (with breaks), and able to frequently push, pull, squat, bend, and reach. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The RoleHave you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role of for a Sr Frontend Software Engineer who will design, implement, and operate globally available distributed systems geared towards controlling, managing, and monitoring Kuiper’s terrestrial devices. You’ll build systems using the latest AWS technologies, leveraging best-in-industry software engineering practices.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities· Actively participate in overall product strategy and UI presentation.· Be involved in every aspect of the UI for new features – from idea generation, exploring different design options, and technical design through software development using the latest technologies and design patterns.· Collaborate with Software Development Engineers, Product Managers, UX Designers to ensure the best experience for our customers.· Design highly functional and lovable UI. The software must be well tested and high quality.· The UI must be compliant with accessibility standards set at Amazon.· Design and implement globally available distributed cloud architectures. · Partner with device software, satellite, networking, and security engineering teams. A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role is for an FEE who will design, build, and maintain components and services of Project Kuiper's Customer Engagement Systems and interact with the core Kuiper Network. About the teamOur team owns developing the architecture, solutions & roadmap for managing the customer lifecycle for telecom services; for example identity and account management, subscriber management services, user provisioning, billing and payments, customer and technical support tools, offer management tools, and customer metrics and analytics.BASIC QUALIFICATIONS- 2+ years of non-internship professional front end, web or mobile software development using JavaScript, HTML and CSS experience- 1+ years of computer science fundamentals (object-oriented design, data structures, algorithm design, problem solving and complexity analysis) experience- Experience using JavaScript frameworks such as angular and react ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Key job responsibilities• Manage import customs compliance for Kuiper imports including, but not limited to, harmonized tariff classifications, country of origin determination, product valuation reporting, import license applications, ACE reporting• Review import documents for accuracy and completeness• Support Kuiper’s customs brokers with necessary data to enable entry filing for Kuiper• Monitor entry status of imports and provide updates to concerned departments of any holds or delays• Take action to respond timely and compliantly to import holds (e.g., CBP / PGA holds)• Upload and maintain electronic import files in record retention repository for audit purposes• HTS classification for Kuiper imports, maintenance of items database in ERP system, support to HTS challenges, work with direct manager and Legal on classification rulings as required• Analyze customs tariffs & duty rates• Maintain Kuiper customs compliance work instructions and SOPs, manage document revisions and support the continuous process improvement of Kuiper’s customs compliance program• Follow the customs compliance internal controls program to ensure compliance with foreign regulations governing imports• Keep and communicate metrics of imports including transit time, compliance accuracy, cost, customs broker performance and relevant data for Kuiper’s leadership• Conduct self-assessments (compliance audits) and implement necessary corrective actions• Provide compliance training to new employees and cross-functional teams and keep training records• Analyze and interpret US import regulations and keep abreast of changes• Collaborate with supply chain, procurement, finance, tax and engineering functions as requiredExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious and earn trust. At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people.Mentorship & Career GrowthOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge sharing and mentorship. We care about your career growth and strive to assign projects based on what will help each team member develop into a better-rounded professional and enable them to take on more complex tasks in the future.Innovation is part of our DNA! Our goal is to be Earth's most customer-centric company, and we are just getting started. We need people who want to join an ambitious program that continues to push the state of the art in space-based systems design and wireless systems.We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship. Our team also puts a high value on work-life balance. Striking a healthy balance between your personal and professional life is crucial to your happiness and success here, which is why we aren’t focused on how many hours you spend at work or online. Instead, we’re happy to offer a flexible schedule so you can have a more productive and well-balanced life—both in and outside of work.About the teamThe Import Compliance Analyst has the primary responsibility of ensuring Kuiper’s Compliance with US laws and regulations. Reporting to the Senior Global Customs Operations PM, the Import Compliance Analyst will promote the sustainability and longevity of Kuiper’s customs compliance program by developing and implementing guidelines and procedures for customs compliance policy, and coordinating activities involved in daily import transactions including, but not limited to, harmonized tariff classifications, country of origin determination, product valuation reporting, import license applications, ACE reporting, dealing with exception shipments, handling free trade agreements, among others. As a critical member of our Global Trade & Compliance Team, the Import Compliance Analyst interfaces with internal and external customers, customs brokers, government officers and other functional areas to ensure compliance and coordination of imports. The Import Compliance Analyst will also identify improvement opportunities and assist with projects to support Global Trade & Compliance initiatives.BASIC QUALIFICATIONS• 3+ years of relevant experience with US Import Customs.• 3+ years of relevant experience with engaging customs brokers and handling import transactions end to end from shipment start to entry filing and record maintenance.• 3+ years of relevant experience with advanced Excel and ERP systems (preferably SAP) and ability to interpret data.• 3+ years of relevant experience in auditing customs transactions both self-assessments and responding to external audits.• 3+ years of relevant experience in industry and/or academia. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.This role is for a highly dynamic and motivated individual that will work with manufacturing engineers to construct instructions and processes for technicians performing test operations. The Test Engineer will support both development and production testing of satellites, and their subsystems. The focus for this role will be in dynamics testing - both vibration table and acoustics. You will work with the designers, systems engineers and analysts to construct detailed work instructions for technicians performing environmental test operations. This role will be responsible for supporting the test team to ensure that tests are conducted in compliance with industry standards as well as internal work instructions. This includes reviewing post-test data, and performing root cause corrective actions for any failures. This position will have the opportunity to collaborate with cross-functional teams to lead process and lab improvement projects.Key job responsibilities- This position will work a 4x10 schedule, Wednesday to Saturday, 6:00 AM to 4:30 PM- Operate test consoles and work with engineering and technician teams to conduct dynamic testing- Review test plans and write work instructions for technicians to set up and execute testing - Analyze post test data and have the ability to write test reports of any non-compliant or off-nominal events- Review failure events and be able to perform root cause analysis and implement corrective actions- Assess safe working conditions and write Job Hazard Analyses for work areas- Ability and desire to work in a hands-on lab environment- Project management skills to accomplish technical projects that span cross functional teams- Establish and increase the efficiency of environmental test processes to maximize output and enable products to rapidly transition from engineering development to rate production- Establish production processes for 5S, FOD control, tool management, calibration procedures and visual management of production tooling and equipment- Enable production test autonomy by challenging requirements, simplifying work procedures, and automating actionsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lab Engineer will assist in development and production satellite manufacturing in the environmental test domain. This position will join the team at an exciting moment, with an opportunity to help form the building blocks of creating a truly unique production system. We value data driven decision making, a comfort in dealing with ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.BASIC QUALIFICATIONS- Bachelors degree in Mechanical or Aerospace engineering, or equivalent- 2+ years hands-on environmental test experience, vibration, shock, acoustic in compliance with MIL-STD-810, SMC-S-016, or MIL-STD-1540- 2+ years working with Data Acquisition systems- Familiar with installing test instrumentation ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are looking for an experienced Applied Scientist to help architect state-of-the-art test infrastructure and lead the development of models and analysis tools to represent the ground truth about satellite test results in order to facilitate important business decisions. Our team is responsible for core infrastructure and tools that will serve as the backbone of automated satellite testing operations to enable rapid scaling of manufacturing processes.Key job responsibilities- Work with engineering, software and manufacturing teams to understand drivers, impacts, and key influences on Integrated Vehicle test results.- Lead the design, buildout and implementation of production systems that leverage multivariate analysis and make decisions in real time for Integrated Vehicle test results.- Drive actions at scale to optimize test methodology and drive increases to satellite reliability.- Automate feedback loops for test result analysis algorithms in production.- Leverage Amazon systems and tools to effectively work with, process and analyze large amounts of data.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Project Kuiper Scientist you will own the architecture definition and development of data analysis tools to aid engineering and production teams in deciding flight-worthiness of each Kuiper satellite and historical traceability tools to enable simplified discovery and interpretation of past test data. You will work with multiple engineering, software and manufacturing teams across ground and space systems, to specify requirements, define data collection, interpretation strategies, data pipelines and implement multivariate data analysis and reporting tools for Integrated Vehicle tests. Your focus will be in optimizing the analysis of test results to enable Project Kuiper production plans. About the teamThe Automated Vehicle Testing Team is responsible for core infrastructure and tools that will serve as the backbone of automated satellite testing operations to enable rapid scaling of manufacturing processes.BASIC QUALIFICATIONS- 5+ years of building machine learning models for business application experience- PhD, or Master's degree and 6+ years of applied research experience- Experience programming in Java, C++, Python or related language- Experience with neural deep learning methods and machine learning ...