Embedded Software Development Engineer, Kuiper

You will work on embedded code for satellite payload software (LINUX and FreeRTOS). You will contribute to various core functionnalities including Over-The-Air (OTA) updates, hardware fault detection, isolation and remediation, operational state management, and devices integrity verifications (ex. PRBS). This position puts an emphasis on hardware and software integration and test automation. We are looking for an outstanding software engineer to participate in all phases of software development from requirements through implementation and test to operations.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesKey job responsibilitiesIn this role, you will drive the design, development, and operation of a variety of key functions such as commanding, telemetry, power control, hardware interfaces, and autonomous capabilities for each satellite throughout its lifetime – from launch to de-orbit.In this role, you will:Own unique embedded software functions through design, implementation (in RUST, C++, C or other), test, and integration in an embedded Linux or real-time operating system (RTOS) environment.Write software to interact with devices/electronics using I2C, I3C, SPI, RS-422, RS-485, Ethernet, etc. communications.Work closely with hardware teams to support board design, secure bring-up, and verification, as well as integration and test.Follow best practices in high reliability embedded software development to ensure high levels of satellite reliability and availability.Work on the Satellite Communication Systems Payload.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Software Development Engineer - Embedded Satellite Software, Project Kuiper Flight Computer Software

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The RoleIn this role, you will participate in all phases of software development from requirements through implementation and test to operations. Our team tackles many critical satellite functions: power management, hardware interfaces, command & telemetry, and autonomous control.Job Responsibilities - Develop embedded software in assembly, C, C++, or other languages in a real-time operating system environment - Write software to interact with devices/electronics using I2C, SPI, RS-422, RS-485, Ethernet, etc. communications - Write device drivers and system applications for flight code and flight management - Work closely with hardware teams to support board bring-up and integration testingExport Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Sr. Technical Program Manager, Kuiper Global Capacity Planning

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Kuiper Global Capacity Planning team owns designing, implementing, and operating systems that support the planning, management, and optimization of Kuiper network resources worldwide. We are looking for a talented technical program manager to lead the process for inventory planning and optimization. This effort will be instrumental in helping Kuiper execute on its business plans globally. As one of our valued team members, you will be obsessed with matching our standards for operational excellence with a relentless focus on delivering results.Key job responsibilitiesIn this role, you will:• Own the monthly processes to generate the Kuiper capacity inventory plan.• Design mechanisms to ensure long-term product and business success across all CPLM product lines.• Move fast, innovate, and find ways to simplify the inventory planning and product development process.• Work closely with Scientists, Engineers, Business Intelligence and Data Engineers to deliver your vision.• Define business and systems requirements working with internal customers.• Create effective ways of measuring the performance of your solutions and surface new opportunities for improvement.• Own and drive strategic communications with senior leaders and executives.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- 5+ years of technical product or program management experience- 3+ years of working directly with engineering teams experience- 3+ years of software development experience- 3+ years of technical program management working directly with software engineering teams experience- Experience managing programs across cross functional teams, building processes and coordinating release schedules ...

Executive Assistant, Kuiper Government Solutions

Have you ever wanted to be part of a team who is building industry changing technology? Amazon’s Project Kuiper is long-term initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband network connectivity to unserved and underserved communities around the world.Key job responsibilitiesReporting directly to the Leadership, Kuiper Regulatory, the Executive Assistant (EA) provides high-level administrative support to ensure Regulatory leadership can efficiently accomplish company initiatives and goals. The EA serves as the primary point of contact for all internal and external administrative matters pertaining to the Regulatory business. The Executive Assistant also serves as a direct liaison to the leadership team; plans, coordinates and facilitates the details of executive internal and external meetings; and oversees special projects as directed. The EA must be creative, organized, detail-oriented, exercise good judgment, have strong written, verbal and administrative skills. The EA must be able to work in a high-stress, dynamic, complex work environment and balance multiple priorities. The EA will have the ability to work independently on projects, from conception to completion, and must be able to work under pressure to handle a wide variety of tasks, assignments and confidential matters with discretion. The EA must demonstrate a strong bias for action by handling administrative matters expeditiously, proactively and professionally to ensure successful completion of assigned projects and tasks.Roles and Responsibilities The EA completes a broad variety of administrative tasks including: • Managing a very active and fluid calendar of appointments; meticulous attention to detail in scheduling, coordinating and planning internal meetings, agendas and appointments; planning detailed domestic and international travel, writing itineraries, arranging point-to-point transportation; compiling documents for travel-related meetings; completing expense reports• Planning the executive’s daily, weekly and monthly schedule of events• Planning, managing and executing ongoing key team activities (staff meetings, all-hands meetings, training, offsites, town halls, skip levels, morale events)• Composing and preparing business correspondence; keeping the executive’s communications organized to filter low priority items and focus on important information• Serving as the "gatekeeper" to the executive office, screening and prioritizing appointments/meeting requests while always providing polite and professional service• Communicating on behalf of the senior executive directly with the leadership team and other stakeholders across the organization • Training other administrative staff on company policies and best practices• Have fun at work and help others do the sameDue to the need to access certain federal controlled information, you must be a U.S. citizen for consideration. A day in the lifeThis exciting role requires attention to detail, the ability to meet tight deadlines, great organizational skills, and the ability to juggle multiple critical requests. A high level of integrity and discretion in handling confidential information, and professionalism in dealing with senior leaders and engineers inside the company is important, as is a good sense of humor. The successful candidate will possess the ability to complete complex tasks and projects quickly with minimal guidance, react with appropriate urgency to situations that require a quick turnaround, and take effective action with ambiguity and show grace under pressure. BASIC QUALIFICATIONS- 5+ years of experience supporting senior level leadership (calendar management, meeting coordination, travel coordination, event planning, etc.)- 3+ years of Project Management/Project Coordination Experience (goal & project tracking, reporting, space planning, budgeting, process improvement, etc.)- 3+ years of experience with advanced use of the Microsoft Office Suite (Outlook, Excel, OneNote, PowerPoint, and Word)- 3+ years of experience as a Executive assistant ...

Manufacturing Assembly Technician II (2nd Shift)

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,000+ satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. We are looking for talented technicians to help full-scale production of the Kuiper satellites. The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution. Key job responsibilities- Follow work instructions and safety procedures- Assemble and test with emphasis to detail, an assortment of LRUs, electrical-mechanical assemblies, avionics, or other complex aerospace builds- Participate in process improvements, maintain floor stock inventory- You will independently execute and prioritize work to meet company deliverables - Execute test procedures for component and system level testing maintenance - Champion safety requirements in all designated zones and work locations- Ensure lab equipment is maintained and calibrated- Supports some preventative maintenance activities on test equipment and data acquisition systems- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)- Your work may include contributing to improving SOPs and safety proceduresExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $33.50 / hour and employees are eligible for incremental raises based on tenure. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon’s internal or external careers site.Additional Requirements: Willing to work 4 / 10s as assigned:2nd shift: 5:00pm - 3:30am PST Sunday -Wednesday OR Wednesday - Saturday- Willing to work overtime and weekends as needed. Shift will vary, depending on program needs.- Flexible working/commuting in between site locations Redmond, WA and Kirkland, WA- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift-up to 25lbs. unassisted BASIC QUALIFICATIONS• 1+ years in a high traceability manufacturing environment, or relevant trade school certification• 1+ years using hand tools and/or precision measuring instruments (i.e., Calipers, multi-meters, torque wrenches)• 1+ years working with test tools and test methods that adequately validate the system• Experience reading, interpreting and working from engineering documentation and/or drawings ...

Manufacturing Assembly Technician II (2nd Shift), Project Kuiper

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,000+ satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. We are looking for talented technicians to help full-scale production of the Kuiper satellites. The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution. Key job responsibilities- Follow work instructions and safety procedures- Assemble and test with emphasis to detail, an assortment of LRUs, electrical-mechanical assemblies, avionics, or other complex aerospace builds- Participate in process improvements, maintain floor stock inventory- You will independently execute and prioritize work to meet company deliverables - Execute test procedures for component and system level testing maintenance - Champion safety requirements in all designated zones and work locations- Ensure lab equipment is maintained and calibrated- Supports some preventative maintenance activities on test equipment and data acquisition systems- Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc)- Your work may include contributing to improving SOPs and safety proceduresExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $33.50 / hour and employees are eligible for incremental raises based on tenure. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon’s internal or external careers site.Additional Requirements: Willing to work 4 / 10s as assigned:2nd shift: 5:00pm - 3:30am Sunday -Wednesday OR Wednesday - Saturday- Willing to work overtime and weekends as needed. Shift will vary, depending on program needs.- Flexible working/commuting in between site locations Redmond, WA and Kirkland, WA- Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift-up to 25lbs. unassisted BASIC QUALIFICATIONS• 1+ years in a high traceability manufacturing environment, or relevant trade school certification• 1+ years using hand tools and/or precision measuring instruments (i.e., Calipers, multi-meters, torque wrenches)• 1+ years working with test tools and test methods that adequately validate the system• Experience reading, interpreting and working from engineering documentation and/or drawings ...

System Development Engineer, Bus S&Flight Operations, Kuiper

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,000+ satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Key job responsibilitiesAs a System Development Engineer in the Bus S&Flight Operations team, you will work with a wide variety of functional groups and will be involved in the design and implementation of software systems for the full cycle of provisioning of Satellites and ancillary, as well as overall system integration:- Develop tools for pre- and post- vehicle validation and testing- Support software bring-up, debug of new hardware.- Work closely with cross-functional teams to design and implement optimized validation and verification software.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global communications service? This role is for a SysDev who will design, build, and maintain components and services of Project Kuiper's Customer eCommerce Services and interact with the core Kuiper Network.About the teamOur team owns developing the architecture, solutions & roadmap for managing the customer lifecycle for communications services; including identity and account management, subscriber management services, user provisioning, billing and payments, customer and technical support tools, offer management tools, and customer metrics and analytics.BASIC QUALIFICATIONS- BS or MS in electrical engineering, computer engineering or computer science, or equivalent experience- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience with Java and Python or other scripting languages. Experience automating, building, and testing systems- Experience with HW/SW bring up and debugging- Experience working in a hardware lab ...