Amazon Kuiper Manufacturing Enterprises LLC

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.As the Sr. SAP Plant Maintenance Lead, you will manage the design, development and implementation of SAP Plant Maintenance projects and new functionalities within the Kuiper Enterprise Systems (ERP : S4 HANA) that allow for the rapid development and production of Space Hardware and reliability of equipment used to manufacture the same. The implementation of these systems are critical to scalability and cost effective business operations. We are looking for candidates who thrive in a fast-paced, start-up like environment. To be successful you need to be highly motivated and detail oriented while showing highest standards of execution.You will collaborate with business customers, companion system functional owners, solution architects and other personnel to develop dynamic and dependable systems to meet the emerging demands of internal customers in manufacturing. Develop Business requirements documents (BRDs), Functional Specifications (FS) and review test documentation. Work in compliance with the programming and documentation standards and solve production problems in a timely manner.Key job responsibilities- Build SAP PM based solution and handle all the deployment related activities. Build reports and deploy. Integration with MES Shop Floor Systems.- Active participation in Requirements gathering, Functional Specifications, High Level Documentation, Integration Test, User Acceptance Test and go-lives to ensure success and meet customer requirements.- Ensure that the deployed applications perform as per customer expectations and there are no performance issues- Building Proof of Concepts (POCs) in lower tier environments based on the business requirements- Support improvement for integration areas including SAP PP, QM, MM, and Scheduling.- Develop requirements and Functional Specs for Fiori Applications in the PM space- Support various testing procedures (Unit testing, Integration testing, automated test scripts).A day in the lifeYou will conduct defect analysis and perform necessary fixes and improvements for any bugs witnessed in production. Collaborate with functional owners, architects and other personnel to develop dynamic and flexible systems to meet the emerging demands of internal customers in manufacturing and maintenance. Develop functional specification and estimations for assigned projects. Work in compliance with the programming and documentation standards and solve production problems in a timely manner.About the teamProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Our team focuses on building Enterprise System Applications for manufacturing satellites. Your customers are Manufacturing, Operations and the Supply Chain teams at Kuiper.BASIC QUALIFICATIONS- Bachelor's degree- Experience owning/driving roadmap strategy and definition- Experience with feature delivery and tradeoffs of a product- Experience contributing to engineering discussions around technology decisions and strategy related to a product- Experience managing technical products or online services- Experience in representing and advocating for a variety of critical customers and stakeholders during executive-level prioritization and planning ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. As a first shift supervisor, you will be engaged in installing, commissioning, and maintaining specialty equipment with the ultimate goal of supporting satellites from the stages of early testing, integration, through to launch and on to production stability. You will maintain complex mechanical, electrical and vacuum chambers to ensure their efficient operations and reliable testing. You will work closely with colleagues throughout Project Kuiper’s inter-disciplinary team to ensure that critical needs and demands on second shift are being met. You will be essential in the on-time delivery of hardware capable of achieving mission success as you are directly responsible for all equipment supporting these functions, and will have broad scope and autonomy to fill all gaps between equipment concept and operations. You will work closely with your second shift team members to ensure critical pass downs and communications are being provided daily. You will lead the charge to develop, improve, review and maintain the preventative maintenance program while ensuring appropriate procedures in place to supporting spacecraft testing and builds. Key job responsibilities- Hands on installation of mechanical systems, electrical sub-systems, and troubleshooting related to a variety of manufacturing equipment - Develop, design, and implement solutions to difficult problems with a sense of urgency - Establish preventative maintenance programs from concept to implementation - Maintain the operation of equipment and systems in the areas of responsibilities such as: Compressed air, electrical distribution, TVAC, thermal chambers, shock and vibe test equipment - Manage internal and external maintenance technicians - Coordinate, schedule and manage multiple projects while meeting tight deadlines - Ensure all environmental, health safety procedures are followed by onsite personnel - Work across teams to develop clear and concise project details for mechanical, electrical, and machine functionality requirements allowing for expedient installations leading to successful operations - Coordinate with engineering, operations, contractors, and maintenance teams to define design facility requirements for specialty equipment during initial stages of design through completion of installation - Establish effective relationships with teams across the program - Develop an understanding of local permit processes - Manage critical spare parts budgets for K.E.G. as equipment is being defined, installed and operated.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamThe Kuiper Equipment Group supports the Space Simulation and Manufacturing teams by installing, commissioning, and maintaining equipment that will provide screening and testing of satellite hardware. The lab has the capability to perform testing in the R&D, Proto-Flight, Qualification and Flight test phases. This will be done utilizing equipment in the lab such as electrodynamic shakers, thermal vacuum chambers, thermal cycling chambers and other equipment to simulate the space environment while assuming responsible for assembly, integration, and test of satellite hardware and the associated equipment and facility definition required to achieve production rates.BASIC QUALIFICATIONS- 5+ years in aerospace production and manufacturing maintenance or relevant trade experience- Previous TVAC and Thermal chamber experience- Experience with Six Sigma, lean manufacturing- Experience working with and managing third party vendors ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.Key job responsibilities- Assist in the composition and maintenance of SOP's in a rapidly changing startup environment- Mentor, lead and develop a team of technicians with a focus on Safety, People, Quality, Planning and Sustainability everyday- Analyze inventory location reports to improve data integrity with negative inventory, duplicate locations, unavailable locations and inaccurate inventory quantities - Provide direction to inventory personnel in day to day solutions to systematic issues - Work with engineering to disposition stagnant and obsolete inventory - Work with process planning to maintain accurate unit of measure issues - Eliminate inventory issues by supporting inventory personnel in day to day system issues- Perform random audits to validate shelf-life storage, inventory accuracy, kit auditing process, traceability and unique locations - Interface with receiving, outbound coordinators, quality, planners, procurement, and other related departments to resolve problems relative to inventory accuracy - Work with material management and quality to resolve traceability issues - Responsible for maintaining the integrity of material that is return to stock - Maintain integrity of all inventory locations- Perform adjustments to Inventory to support finance requirements- Daily receiving of material to stock new inventoryA day in the lifeWe’re hiring a Lead Technician who will leverage their logistical, analytical, and manufacturing knowledge to support Project Kuiper by working with engineers and quality to maintain the integrity of the material life cycle. In this role you’ll function as the focal point for inventory transactions in support of Systems Applications and Products (SAP) testing requirements and perform physical and cycle counts of inventory. You’ll also identify areas for improvement, perform root cause analysis of escapes and missed targets, and use data to drive process improvements, identify blockers, and provide solutions.BASIC QUALIFICATIONS- High school diploma or equivalency certificate- 2+ years of experience in an inventory or analytical role- 2+ years of experience working with SAP/ERP systems- Ability to lift 50 pounds unassisted- Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position- Ability to work all required shift hours, including overtime, and weekends, as needed- Expected shift start is 12 PM to 3 PM but shifts may change due to business needs ...

Project Kuiper is an initiative to increase global broadband access through a constellation of more than 3,000 satellites in low Earth orbit. Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.As the SAP Manufacturing Integration & Intelligence (SAP MII) developer, you will manage the design, development and implementation of SAP MII projects connected to Enterprise Systems that allow for the rapid development and production of Space Hardware. The implementation of these systems are critical to scalability and cost effective business operations. We are looking for candidates who thrive in a fast-paced, start-up like environment. To be successful you need to be highly motivated and detail oriented while showing highest standards of execution.You will conduct defect analysis and perform necessary fixes and improvements. Collaborate with functional owners, architects and other personnel to develop dynamic and flexible systems to meet the emerging demands of internal customers in manufacturing. Review program codes and correct MII program errors. Maintain and update existing program codes as needed. Develop technical specification and estimations for assigned project. Work in compliance with the programming and documentation standards and solve production problems in a timely manner.Key job responsibilities• Build SAP ME and SAP MII based solution and handle all the deployment related activities. Build reports and deploy. Integration with ERP and Shop Floor Systems.• Active participation in Integration Test, User Acceptance Test and MES startup to ensure success and meet customer requirements.• Ensure that the deployed applications perform as per customer expectations and there are no performance issues• Building Proof of Concepts (POCs) using SAP ME and SAP MII as the service based on the business requirements• Lead the solution design and develop SAP MII applications to populate real and historical data extracting information from data sources Kepware, SAP S/4 HANA and shop floor systems (MII, Historian, etc.) for reporting and analysis.• Support improvement for areas including PP-PI, QM, MM, PM, PCo, and Scheduling.• Develop Web applications using SAP MII, PCo, Kepware, and SAP S/4 HANA• Develop Printing labels, Travelers documents, and purchase order receipt label, process order receipts, and shop floor forms in MII system.• Improve performance of the applications and servers through Performance tuning/sizing of servers, and changing the design and fine tuning the SQL queries.• Support various testing procedures (Unit testing, Integration testing, class room testing, shop floor testing).A day in the lifeYou will conduct defect analysis and perform necessary fixes and improvements. Collaborate with functional owners, architects and other personnel to develop dynamic and flexible systems to meet the emerging demands of internal customers in manufacturing. Review program codes and correct MII program errors. Maintain and update existing program codes as needed. Develop technical specification and estimations for assigned project. Work in compliance with the programming and documentation standards and solve production problems in a timely manner.About the teamProject Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Our team focuses on building Enterprise System Applications for manufacturing satellites. Your customers are Manufacturing, Operations and the Supply Chain teams at Kuiper.BASIC QUALIFICATIONS• 5+ years in an information technology role • 3+ years with SAP MII/ME• 3+ years implementation experience as SAP technical architect• 2+ years of solid Grasp of the fundamentals of operating SAP ERP. (RFC/ BAPI, ALE/ IDoc Settings), XML/ XPath/ Web Services• 2+ years of Transaction writing in MII ...

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Precisely clean and inspect aerospace hardware using specialized techniques and equipment• Ensure components meet strict quality standards before assembly or further processing • Utilize specialized cleaning solutions and methods for intricate parts with tight tolerances• Adhere to strict quality standards and maintain accurate documentation• Handle hazardous materials following proper safety protocols in a cleanroom environment• Maintain and calibrate equipment regularly• Identify equipment requirements and process improvements• Manage floor stock inventory• Work independently to prioritize tasks and meet company deliverables• Receive shipments and coordinate deliveries using forklifts and pallet jacks• Contribute to improving Standard Operating Procedures (SOPs) and safety protocolsWork Schedule:Standard shift: 7:00 AM - 3:30 PM (may vary based on program needs) Must be willing to work all shifts, overtime, and weekends as requiredRequirements: • Strong attention to detail• Ability to follow strict procedures and documentation requirements• Experience with or willingness to learn specialized cleaning techniques• Commitment to safety and quality standards• Ability to work independently and as part of a team• Physical ability to handle materials and operate equipment safelyA day in the lifeThe successful candidate will have experience cleaning tight tolerance aerospace components. The desired candidate will have experience in a fast paced machining environment.About the teamThe Kuiper machine shop provides development fabrication capabilities as well as future production machining. These operations occur in our Redmond facilities.BASIC QUALIFICATIONS- High school diploma or GED- 1+ years relevant aerospace/automotive manufacturing experience or or equivalent industry experience- 1+ machine shop experience/cleaning experience ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a Project Kuiper Manufacturing Test Engineer you will own the execution of test campaigns for sub-assemblies to ensure readiness for satellite integration. You will work with multiple engineering and manufacturing teams to specify test equipment requirements, develop and execute test plans to support development and production test initiatives. Your focus will be in optimization of test processes to enable Project Kuiper production ramp plans.This is a fast-paced, intellectually challenging opportunity to work with thought leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve. We want individuals who want to reach beyond what is possible today. Everyone on the team needs to be entrepreneurial, wear many hats and work in a highly collaborative environment.Key job responsibilities* Experience with test automation frameworks like TestStand, Robot Framework, or similar tools for creating and managing automated test sequences.* Ability to convert test plans and hardware specifications into automated scripts that execute test cases, record results, and handle exceptions.* Experience with designing test cases for functional, performance, and stress testing in hardware systems.* Strong debugging skills for identifying issues in both the test scripts and hardware setups.* Familiarity with test equipment error logs, signal analysis, and troubleshooting hardware and software integration problems.* Understanding of hardware communication protocols (e.g., SPI, I2C, RS232, Ethernet) to interface with test equipment or devices under test (DUT).* Proficiency in developing manufacturing process controls to ensure product quality and consistency, including defining key process parameters, implementing statistical process control (SPC) methods, and integrating mistake-proofing (poka-yoke) techniques.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeYour responsibilities will include identifying and resolving testing issues to keep production on schedule, as well as driving efficiency improvements through automation and process changes. You will collaborate closely with manufacturing, design, thermal and electrical engineering teams to achieve these objectives.* 40% on the shop floor, working with production teams to implement new processes, review & solve key technical blockers in production, performing production development testing, etc.* 30% independent development work analyzing production and test data to identify and implement key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc.* 30% meeting settings, collaborating with others on topics such as new design introductions, production process change management, production solution finding reviews, etc.About the teamThe Satellite Hardware sub-assembly team is responsible for production of satellite components and execution of test plans to ensure reliable operation of satellite vehicles in space. The team’s responsibilities include assembly station builds, in-station hardware testing, along with creating and maintaining automated scripts for functional and performance testing during Acceptance Test Procedures (ATP) in environmental chambers.The tasks and daily focus change rapidly, and you will often take on exciting new responsibilities to ensure project success. Expect to be deployed to address complex problems by identifying the scope of the issue and quickly establishing innovative and functional solutions.BASIC QUALIFICATIONS- Bachelor’s degree in electrical engineering, aerospace engineering, computer science or a related field.- 2+ years of hands-on testing experience.- 2+ years experience developing and executing test plans for complex aerospace, automotive or consumer electronics systems.- 1+ years of scripting or programming experience (Python, MATLAB, C, Labview)- Solid understanding of Engineering and Testing fundamentals. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.As a Software Development Engineer you will own the development, implementation, and test of the cloud service to manage the configuration of Kuiper hardware and software. You will work with engineering teams across ground and space systems, to understand how the system functions and deliver an integrated solution to prepare for and execute the mission. Because of the scale of the mission, you will be focused on driving automation and operational excellence.The ideal candidate will be detail oriented, have strong organizational skills, able to work independently, juggle multiple tasks at once, and maintain professionalism under pressure. You should have deep knowledge software engineering practices, understand how software and hardware systems interact, and can drive design and implementation of operational execution of objectives in complex systems. Familiarity with space systems is desired.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamThe team builds and maintains the software services responsible for building and managing critical configuration about Kuiper satellites.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are looking for an experienced Applied Scientist to help architect state-of-the-art test infrastructure and lead the development of models and analysis tools to represent the ground truth about satellite test results in order to facilitate important business decisions. Our team is responsible for core infrastructure and tools that will serve as the backbone of automated satellite testing operations to enable rapid scaling of manufacturing processes.Key job responsibilities- Work with engineering, software and manufacturing teams to understand drivers, impacts, and key influences on Integrated Vehicle test results.- Lead the design, buildout and implementation of production systems that leverage multivariate analysis and make decisions in real time for Integrated Vehicle test results.- Drive actions at scale to optimize test methodology and drive increases to satellite reliability.- Automate feedback loops for test result analysis algorithms in production.- Leverage Amazon systems and tools to effectively work with, process and analyze large amounts of data.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Project Kuiper Scientist you will own the architecture definition and development of data analysis tools to aid engineering and production teams in deciding flight-worthiness of each Kuiper satellite and historical traceability tools to enable simplified discovery and interpretation of past test data. You will work with multiple engineering, software and manufacturing teams across ground and space systems, to specify requirements, define data collection, interpretation strategies, data pipelines and implement multivariate data analysis and reporting tools for Integrated Vehicle tests. Your focus will be in optimizing the analysis of test results to enable Project Kuiper production plans. About the teamThe Automated Vehicle Testing Team is responsible for core infrastructure and tools that will serve as the backbone of automated satellite testing operations to enable rapid scaling of manufacturing processes.BASIC QUALIFICATIONS- 5+ years of building machine learning models for business application experience- PhD, or Master's degree and 6+ years of applied research experience- Experience programming in Java, C++, Python or related language- Experience with neural deep learning methods and machine learning ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Quality Team at Project Kuiper is looking for a Quality Inspector to join our team and help perform critical inspection duties within our Manufacturing Quality organization.Key job responsibilitiesThe Quality Inspector will operate advanced metrology equipment to ensure product conformance for highly-complex aerospace grade hardware.- Perform Receiving Inspection activity using sampling plans and metrology equipment, such as CMMs, Romer Arms, micrometers, calipers, height gages, calipers, micrometers, gages, etc..- Report nonconformances when defective material is found.- Develop and lead 5S activities around the Quality area(s) to ensure efficient working areas.- Read Inspection Plans and Work Instructions to perform quality inspections- Interpret engineering blueprints and drawings to the ASME Y14.5 standard to GD&T- Perform Critical in-process and final inspections for assembled product.- Complete First Article Inspection Reports (FAIRs) to the requirements of AS9102- Develop Standard Operator Procedures (SOPs) for other inspectors to follow for day-to-day tasks.- Train new inspectors on the correct usage of equipment and day to day responsibilities.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.The starting pay for this role in Washington State is up to $38.50/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeThis role will work daily to:Execute inspection plans for a wide variety of received hardware, utilizing a wide range of equipment.Perform and complete FAIs to AS9102 and present package to engineering for sign off.Inspect and buy off rework/repair activitiesInvestigate hardware for defects, and create nonconformance reports for discrepant hardwarePerform In-Process and Final inspections for assembly processesDevelop Standard Operator Procedures (SOPs) for other inspectors to follow for day-to-day tasks.Train new inspectors on the correct usage of equipment and day to day responsibilities.This role will be working one of these shifts: Back Half- Sunday - Wednesday - 5:30pm - 3:30am Wednesday - Saturday - 5:30pm - 3:30am About the teamThe Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join the team at an exciting moment, with an opportunity to own quality system development and contribute to the design of requirements, processes, and systems used across the business. We value data driven decision making, a comfort with dealing in ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.BASIC QUALIFICATIONS- 2+ years experience as a Quality Inspector in a Receiving Inspection Role. - 2+ years experience reading/ interpreting Engineering Drawings or schematics - 2+ years experience in using hand measuring tools. i.e Height gauge, Calipers, Micrometers. ...

Are you passionate about working on cloud-services that help millions of customers worldwide get connected to the internet? Project Kuiper is Amazon's initiative to launch a constellation of low-earth orbit satellites that will provide high-speed, low-latency broadband to underserved communities worldwide. This role is on the Customer Device Services team that enables device management and monitoring for end-customers. This is a unique chance to be developing new services that impact millions of customers worldwide.This role is for a Software Engineer tasked with designing, implementing, and operating globally available distributed systems. You'll build systems using the latest AWS cloud technologies, leveraging best-in-industry software engineering practices.Key job responsibilities· Design and implement globally available distributed cloud architectures.· Partner with device software, satellite, networking, and security engineering teams.· Evangelize engineering excellence best practices and mentor junior engineers.Key job responsibilities* Design and Implement Telecom Components, Applications and Services* Partner with the E-commerce, Networks and Security engineering teams* Design components, services, and relevant data modelsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role is for a Software Development Engineer who will design, build, and maintain components and services of Project Kuiper's Customer Devices Services and interact with the core Kuiper Network.A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role is for a Software Development Engineer who will design, build, and maintain components and services of Project Kuiper's Customer Devices Services and interact with the core Kuiper Network.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,000+ satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Key job responsibilitiesAs a System Development Engineer in the Bus S&Flight Operations team, you will work with a wide variety of functional groups and will be involved in the design and implementation of software systems for the full cycle of provisioning of Satellites and ancillary, as well as overall system integration:- Develop tools for pre- and post- vehicle validation and testing- Support software bring-up, debug of new hardware.- Work closely with cross-functional teams to design and implement optimized validation and verification software.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global communications service? This role is for a SysDev who will design, build, and maintain components and services of Project Kuiper's Customer eCommerce Services and interact with the core Kuiper Network.About the teamOur team owns developing the architecture, solutions & roadmap for managing the customer lifecycle for communications services; including identity and account management, subscriber management services, user provisioning, billing and payments, customer and technical support tools, offer management tools, and customer metrics and analytics.BASIC QUALIFICATIONS- BS or MS in electrical engineering, computer engineering or computer science, or equivalent experience- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience with Java and Python or other scripting languages. Experience automating, building, and testing systems- Experience with HW/SW bring up and debugging- Experience working in a hardware lab ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilities- Gate Level Simulation: Develop and maintain comprehensive gate-level simulation test plans for verifying ASIC functionality and timing. Analyze simulation results, identify and debug logic errors, and propose solutions. Work closely with design and verification engineers to validate fixes and ensure design closure.- Facilitate seamless integration across Firmware, RTL, Platform Software, and Platform Drivers.- Develop Debug tools: RTL Emulation, silicon bring-up, and functional validation. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeBe part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.About the teamIn this role you will: · Work closely with the system architects to develop world-class SOC and IP blocks, which meet power, area and performance targets. · Define, configure and integration SoC Subsystems · Contribute to the SoC floor planning effort · Define and develop any necessary support logic · Configure, instantiate and integrate 3rd party IP blocks · Understand low power design & the impact of DFT on the blocks · Perform initial synthesis & timing analysis · Assist verification team in unit verification including test plan development · Assist with debug and bring-up BASIC QUALIFICATIONS7+ years of non-internship professional software development experience7+ years of programming with at least one software programming language experience7+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experienceExperience as a mentor, tech lead or leading an engineering team7+ years of digital design experience, preferably in SoC design and implementation ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3000 plus satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Export Control : This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.In Project Kuiper Enterprise Engineering, we build the software, services, and infrastructure that enable our program to design and engineer the future of LEO Satellite based broadband services. We are an AWS-focused, builder-centric organization. We build with AWS technology to develop the best solution for our team to succeed. Our team succeeds when the entire Project Kuiper organization can scale as needed to be successful.Key job responsibilities- Provision and manage AWS infrastructure, including EC2, CloudFormation Templates, AppStream, and Load Balancers.- Design and manage best in class cloud, on premise and hybrid service environments.- Build dashboards and alarms to drive operational excellence.- Work with a wide range of technologies, and AWS products.- Build AWS Application Environments including VPC, EC2, RDS, SSM, S3.- Architect and setup infrastructure on AWS and AWS gov-cloud environments.- Analyze and Support setup of new devices connectivity to applications.- Monitor network connectivity between all internal and external systems.- Work closely with Application leads to understand needs and plan for infrastructure demands.- Drive automation of routine tasks to help scale the operations.- Maintain hardware architecture documentation for all infrastructure and networking components.- Lead by example, mentor and support your team and org.A day in the lifeJoin a high output hybrid team of System Development Engineers, SAP architects, COTS product team and System Engineers supporting Kuiper Government Solutions enterprise applications.Work closely with key Business and tech stakeholders to design and implement service infrastructure to meet the specific needs of FAR12/15 compliance.A unique opportunity to be an instrumental member of a team supporting a business goal from the beginning.About the teamKuiper Government Solutions (KGS) Business Systems team is responsible for a suite of products to automate and optimize business operations for Kuiper Government Solutions (KGS). This is anchored in business process modeling and configuring SAP ERP’s enterprise capabilities to streamline and optimize critical business processes, including Order-to-Cash (OTC), Procure-to-Pay (PTP), Record-to-Report (RTR), and Make-to-Order (MTO). The team also owns Contract Lifecycle Management (CLM) and Pricing systems. The solutions are built to comply with applicable Federal Acquisition Regulations (FAR)BASIC QUALIFICATIONS- Experience leading the design, automation, deployment, and support of large-scale infrastructure- Experience programming with at least one modern language such as Python, Ruby, Golang, Java, C++, C#, Rust- Experience with Linux/Unix- Experience with CI/CD pipelines build processes- 3+ years of programming with at least one modern language such as C++, C#, Java, Python, Golang, PowerShell, Ruby experience- 4+ years of non-internship professional infrastructure and system development experience- 2+ years of designing or architecting (design patterns, reliability and scaling) of new and existing systems experience- 4+ years of systems development in an IT or data center environment experience- 4+ years of deploying and operating in a Linux/Unix environment experience- 2+ years of systems design, software development, operations, automation, and process improvement experience- Experience leading the design, build and deployment of complex and performant (reliable and scalable) software solutions in production ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The RoleHave you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role of for a Sr Frontend Software Engineer who will design, implement, and operate globally available distributed systems geared towards controlling, managing, and monitoring Kuiper’s terrestrial devices. You’ll build systems using the latest AWS technologies, leveraging best-in-industry software engineering practices.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities· Actively participate in overall product strategy and UI presentation.· Be involved in every aspect of the UI for new features – from idea generation, exploring different design options, and technical design through software development using the latest technologies and design patterns.· Collaborate with Software Development Engineers, Product Managers, UX Designers to ensure the best experience for our customers.· Design highly functional and lovable UI. The software must be well tested and high quality.· The UI must be compliant with accessibility standards set at Amazon.· Design and implement globally available distributed cloud architectures. · Partner with device software, satellite, networking, and security engineering teams. A day in the lifeHave you wanted an opportunity to develop the software applications and services for an advanced global telecom service? This role is for an FEE who will design, build, and maintain components and services of Project Kuiper's Customer Engagement Systems and interact with the core Kuiper Network. About the teamOur team owns developing the architecture, solutions & roadmap for managing the customer lifecycle for telecom services; for example identity and account management, subscriber management services, user provisioning, billing and payments, customer and technical support tools, offer management tools, and customer metrics and analytics.BASIC QUALIFICATIONS- 2+ years of non-internship professional front end, web or mobile software development using JavaScript, HTML and CSS experience- 1+ years of computer science fundamentals (object-oriented design, data structures, algorithm design, problem solving and complexity analysis) experience- Experience using JavaScript frameworks such as angular and react ...

Project Kuiper is an initiative to increase global broadband access through a constellation of more than 3,000 satellites in low Earth orbit. Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world.Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.As the SAP Quality Management expert you would design solutions, enhance and support SAP Quality management and Production Planning modules. And work closely in integration with SAP EWM and SAP Manufacturing execution systems. The enhancement and support of these systems is critical to scalability and cost-effective manufacturing of satellites and ground gateway terminals. To be successful you need to be highly motivated, detail oriented and effective communicator.Key job responsibilities- Build SAP QM based solutions- Ability to identify and implement best practices to optimize business processes using SAP. - Conduct Blueprint workshops, fit-gap analysis and produce detailed design documents- Prepare functional specifications, configure, test and lead implementation for all SAP RICEFW areas- Build and support integration with SAP PP, EWM, MM, SAP MES system- Support SAP Production system for ticket resolutions, business support needs.- Ensure that the deployed applications perform as per customer expectations and there are no performance issues- Identify training needs, support creating training documentation and lead train the trainer sessions- Participate in strategic planning, roadmap discussions for SAP Quality Management solutions- Participate in quarter planning, sprint planning, deployment for continuous enhancements- Team player, ready to share and contribute to collective success of the teamA day in the lifeCollaborate with functional owners, architects and developers to build dynamic and flexible systems to meet the emerging demands of internal customers in manufacturing. Support production system for Support tickets , bug fixes and identifying optimization opportunities to enhance overall process and system performance. Your primary role will be to understand and address business requirements by designing solutions, configuring the QM and PP modules, supporting the development of RICEFW objects, conducting tests, and ensuring smooth integration with other modules such as EWM, MES, and MM.About the teamOur team focuses on building Enterprise Application systems for manufacturing satellites. Your customers are Quality, Manufacturing and Sourcing teams at Kuiper.BASIC QUALIFICATIONS- 5+ years of Development and Support experience with SAP QM Module - 5+ years of Implementation and Enhancement experience with SAP S/4 HANA - 5+ years in an information technology role ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. You will design, craft, and deploy reliable embedded software for large quantity of consumer electronic products. Kuiper is breaking new ground with every device we design, and you will be an integral part of bringing this family of products to customers.Export Control RequirementDue to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities· Develop embedded software for terrestrial devices within the Project Kuiper system.· Participate in all phases of SDLC including requirements gathering, design, code, test, and code/test coverage.· Developing embedded software in assembly, C, C++, Rust or other languages· Have experience with real-time embedded software philosophies and practices· Have expertise with Linux and RTOS· Review schematics, logic analyzer, and embedded software (bare-metal) trouble-shooting techniques.A day in the lifeAs part of our BSP software engineering team, you will design and implement embedded software used in the Project Kuiper products. You will work in a collaborative environment with teams inside and outside of Amazon. You will craft your software from requirements, designs, code, test, to product deployment. You need to be flexible and responsive to changing priority issues.About the teamThe Kuiper Customer Terminal Software Team supports the devices that connect our customers to the Kuiper network. We provide software for both applications and the underlying Linux system. We work hand in hand with hardware, product and operations teams to deliver a great experience for our customers.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming language ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!As the lead, you will own the successful delivery of the satellite RF Hardware such as TTNC and GNSS solution into the overall Kuiper program. Consequently, you will work with senior management and program management to plan, schedule, and execute delivery of various subsystems. This position requires a technical understanding of RF concepts, mixed signal designs, and FPGA workflows. Must be able to work effectively cross-functionally with multiple disciplines. In this role you will:- Lead a team of RF and mixed signal engineers to develop, qualify, and produce high performance space hardware- Drive hardware designs forward and ensure successful release.- Own delivery of subsystems to various internal customers, including satellite integration and payload integration.- Manage inter-dependencies with other teams to ensure tight alignment for successful subsystem deliveries.- Work with test team to ensure automation and test execution is ready and available for use.- Identify issues and gaps and drive them to closure.- Provide clear and concise reporting to upper management.- Organize, plan, and execute hardware bring-up and DVT campaigns.- Lead hardware and software integration efforts.- Derive RF HW specifications for the RF system and RF blocks- Evaluate systems and directs design modifications.- Be responsible for generating, reviewing and implementing engineering change orders.- Troubleshoot and repairs circuits and fixtures.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities- Will work cross-functionally on collaboration to fluently engage with diverse engineering disciplines, effectively advocate for RF system requirements, and ensure alignment for overall system success.- Assist in the design of modem hardware, and Ka-Band circuitry- Develop Microwave and millimeter wave RF hardware requirements and end to and system test plans.- Works closely with the production test team to define test fixture requirements that identifies any manufacturing circuit error. - Develop, designs, and test of high-power RF/microwave components, subsystems and systems.- Derive RF HW specifications for the RF system and RF blocks- Performs root cause analysis on products, technical problems, processes and documentation.- Assess feasibility of various designs in support of architectural definition- Deriving top-level specifications for RF links and RF and antenna subsystems- Participate in subsystem design and prototyping, schematic capture, prototype bring-up and debugging, hardware bug tracking, functional verification, and signal characterization- Evaluate and characterize prototypes and RF components- Support manufacturing engineers on production testing of RF avionics components and systems- Coordinates schedule and cost forecasting with the project Manager and Program Manager.- Directs design engineering personnel in the design and development.- Evaluates systems and directs design modifications.- Responsible for generating, reviewing and implementing engineering change orders.- Troubleshoots and repairs circuits and fixtures.BASIC QUALIFICATIONS- Bachelor's degree or higher in Electrical Engineering, or related discipline, or 7+ years of equivalent relevant experience- 3+ years of managing teams- Experience coordinating amongst diverse disciplines (software, production, reliability) to drive full-lifecycle system development- Experience with RF/ microwave design expertise in Power, Low Noise and Driver Amplifier design for commercial and military communications receivers, transmitters and sub-systems up to 50 GHz.- Experience with analog, digital and mixed mode circuit design and layout.- Ability to plan, direct, and manage project work.- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.- Excellent math aptitude, written and communication skills.- Ability to work in a fast-paced environment. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are seeking a highly skilled and motivated Equipment Mechanic specializing in Preventative Maintenance to join our team. The ideal candidate will have a strong background in industrial equipment installation, troubleshooting, and maintenance, as well as a passion for ensuring optimal equipment performance in production and development environments. What We’re Looking For- Proven experience in troubleshooting and maintaining industrial machinery.- Hands-on expertise in preventative maintenance and mechanical systems.- Strong ability to work collaboratively with cross-functional teams, including engineering and production.- A proactive mindset, attention to detail, and commitment to quality.Key job responsibilitiesSHIFT: Sunday-Wednesday or Wednesday-Saturday Shift Times: 0600-16:30- Equipment Installation: Install industrial equipment and machinery with precision and adherence to specifications.- Equipment Bring-Up and Troubleshooting: Diagnose and resolve issues during equipment setup and operation.- Preventative Maintenance: Conduct regular preventative maintenance to ensure long-term reliability and performance.- Machine Commissioning: Oversee commissioning processes and provide troubleshooting support as needed.- Facilities Workshop Maintenance: Manage and maintain the workshop to ensure it is fully operational and organized.- Custom Equipment Installation: Assist in the installation and commissioning of custom-built equipment.- Collaboration with Engineering Teams: Work closely with engineers to provide design feedback, assist with project execution, and support commissioning activities.- Production and Development Support: Provide mechanical support to production and development teams as required.- Valid Driver’s license and able to satisfy Amazon driver eligibility criteria.- With or without reasonable accommodations, must be able to lift up to 49 pounds on some occasions, stand/walk for up to 8-10 hours (with breaks), and able to frequently push, pull, squat, bend, and reach.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.The starting pay for this role in Washington State is up to $37.00/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.A day in the lifeThis position will work side by side with Engineering and Production teams to develop creative solutions and take this program from R&D, though design validation, into production then maintain equipment to support operations. About the teamThis is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. We want individuals who are ready for this challenge and want to reach beyond what is possible today.BASIC QUALIFICATIONS- High school diploma or equivalency certificate.- At least 1 year working experience with installing, commissioning, troubleshooting, and maintaining specialty industrial equipment in a manufacturing equipment.- With or without reasonable accommodations, must be willing and able to work with powered lift equipment – for example forklift or scissor lifts. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.To deliver these complex solutions, as the Senior Technical Program Manager you will partner with peers across all Kuiper teams, including hardware, software, supply chain, manufacturing, launch, facilities, finance, compliance, and HR. This role includes direct responsibility for program management of system level development, integration, and test. This is a highly technical role requiring experience with integrated hardware and software development as well as some appreciation for complex applications. Candidate superpowers should include ownership, insist on high standards, stakeholder management, people development, innovation, creating clarity out of ambiguity, and enabling productive collaboration. Key job responsibilitiesAs a Senior Technical Program Manager for the PMO Office you will - Own the satellite production roadmap that delivers the end-to-end solutions necessary to source, build, test and launch satellites at high rates. - Establish the linkage between production roadmap and annual goals & objectives, creating and owning tools and mechanisms to measure, monitor and optimize these projects. - Represent the overall production roadmap in assessing technical trades related to innovation, speed, manufacturability, cost, stability and trust. - Understand dependencies between roadmap projects, synchronize milestones, identify constraints and dive deep where necessary to unblock and deliver the roadmap.- Create new tools and business processes that simplify, standardize and enable operational excellence across the entire production value stream.- Develop and own tooling to create operational rhythms for all of Kuiper Operations teams- Execute a strategic plan that defines how teams will deliver on forward-looking production plans. - Partner with business teams on scalable standardized approaches to meet their demand and enable growth. - Develop and manage the program level Production Ramp schedule (including Production, Supply Chain, PPF, Launch, Finance and Back Office Functions) to act as a single source for project timeline tracking and synchronization. - Drive the creation, documentation, and adoption of scalable, standardized, and highly visible processes across all supply chain, manufacturing and launch functions. - Drive executive communication cadence and deliver artifacts that provide insight into the activities, accomplishments, challenges and risks of operations. - Establish and own reporting mechanisms, business strategy documents, operating rhythms- Measure, analyze, improve, and control KPIs across all aspects of the operation. - Drive year over year optimization opportunities in all areas of operations, including manufacturing and sourcing.- Provide feedback/escalate systemic concerns to tech teams regarding approaches that are cost-inefficient or detrimental to scaling.- Create new tools and business processes that simplify, standardize and enable operational excellence across the entire production value stream.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThis role will be highly collaborative, requiring partnerships with cross-functional leaders to drive positive results. This role requires ability to advocate on behalf of our customers (internal and external) and an ability to push back without being adversarial.This person will tackle challenging, novel situations every day and have the opportunity to work with multiple technical teams at Amazon in different locations. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun and make a positive impact on millions of people.The main responsibility of this role is to drive business review mechanisms that inspect the health and drive improvements for the business. This is end-to-end ownership, from designing these mechanisms, getting stakeholder to align and commit efforts and driving the rhythm of the business based on the outcomes of these reviews. About the teamThe problem statement that this team is trying to tackle is scaling the production of our satellite technology. The vision of OPM team is to enable success of end-to-end Kuiper operations team by proactively developing systems, processes, mechanisms, and tools that are required to detect issues, expose root cause, validate improvements, maintain controls, and drive operational rhythms. OCC is a force multiplier, identifying and accelerating the speed which operating teams achieve goals with fewer resources. BASIC QUALIFICATIONS- 5+ years of technical product or program management experience- 7+ years of working directly with engineering teams experience- 3+ years of software development experience- 5+ years of technical program management working directly with software engineering teams experience- Experience managing programs across cross functional teams, building processes and coordinating release schedules ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Space Simulation team will provide screening and testing of satellite hardware. The lab has the capability to perform testing in the R&D, Proto-Flight, Qualification and Flight test phases. This will be done utilizing equipment in the lab such as electrodynamic shakers, thermal vacuum chambers, thermal cycling chambers and other equipment to simulate the space environment.As a Space Simulation Lab Support Technician, you will be responsible for performing various tasks throughout the facility. We are looking for candidates who thrive in a fast paced, start-up like environment. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Key job responsibilities- Operation of environmental test chambers (Thermal cycling, vacuum, HALT/HASS)- Install instrumentation on various types of hardware and fixtures- Execute electronic test procedures for component and system level testing- Ensure lab equipment is maintained and calibrated- Supports some preventative maintenance activities on test equipment and data acquisition systems- Your work may include contributing to improving SOPs and safety proceduresExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.The starting pay for this role in Washington State is up to $33.50/hour and employees are eligible for incremental raises based on tenure. A full range of medical, financial, and/or other benefits are provided. This information is provided per the Washington State Pay Transparency Act. Base pay information is based on market location. Applicants should apply via Amazon's internal or external careers site.Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeA technician in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite. You will have to be comfortable in a high paced environment and being able to multitask while still being able to produce high quality work. BASIC QUALIFICATIONS- High school degree or equivalency certificate- Minimum 1 year working in test lab or manufacturing environment, using basic hand tools ...