Amazon Kuiper Infrastructure LLC

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We are looking for a talented engineer to help develop and maintain the code infrastructure and software procedures used to process Kuiper satellites for launch.As part of the Kuiper team, you will solve difficult problems where resolutions have high impact, and help create a brand new set of launch site processes and standards. To be successful you need to be highly motivated and detail oriented while maintaining the highest standards of execution. The Launch Operations Systems Engineer is part of a team of system development engineers who build and maintain both a code pipeline and a code library used to process satellites at the launch sites. This code includes the ability to charge the satellite batteries, perform a health and aliveness check, load propellant, and integrate with the launch providers’ hardware. The individual must be comfortable working with both satellite hardware and software technologies and understand how software solutions directly impact the satellite and the people working on it. The ideal candidate is an electrical engineer who loves to code or a software engineer who enjoys working on physical systems.This engineer will work directly with the manufacturing engineering teams at the launch site as well as several software teams through the Kuiper organization. As the final touchpoint for satellite processing before launch, the Launch Operations Software team often combines contributions from other teams and subject matter experts to execute satellite processes. Most problems we tackle often start out ambiguous and are defined by this team as the needs of the satellite and manufacturing engineers are better understood. The ideal candidate is comfortable in a highly technical and collaborative setting and is able to interpret technical requirements and turn them into actionable steps.Key job responsibilities- Develop and maintain satellite processing software test procedures- Develop and maintain code pipeline infrastructure- Test satellite code ahead of release using hardware in the loop and other test assets- Support manufacturing engineers by defining and executing test requirements- Develop automated testing systems to increase satellite manufacturing processes- Collaborate with hardware and software design teams to triage and resolve operational issues- Operations will occur primarily on first shift, Monday-Friday but off-shift and weekend work may be required depending on testing/production/launch schedules- This position is based in Merritt Island, FL but does required travel, up to 25% annually, either domestically or internationallyExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumA day in the lifeA Launch Operations Systems Engineer is customer obsessed with the satellite manufacturing team. They collaborate with design and manufacturing engineers to turn test requirements into software procedures. One day they may be designing a new a software capability. The next day, they will be maintaining the code pipeline. The third day, they might be working with the manufacturing engineers to command the satellite. They will develop new solutions, test them on non-flight articles, solicit review and approval from other stakeholders and release a final solution. The ideal candidate works in collaboration with other departments to deliver a software solution.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences.At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing. BASIC QUALIFICATIONS- Bachelor’s degree in computer engineering, electrical engineering or comparable degree- 3+ years of coding experience with a scripting language such as Python, C#, TypeScript, or similar- Experience with AWS services and cloud development- Proficiency of version control systems (e.g., Git) and CI/CD pipelines- Experience in developing functional specifications, design verification plans and functional tests- Ability to obtain and maintain a US Passport- Ability and willingness to comply with the Government of French Guiana which mandates that travelers receive vaccinations for yellow fever and COVID-19- Ability to pass Kennedy Space Center background checks ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The processing lead technician will work as a part of a team of technicians through satellite propellant loading operations. The propellant loading system utilizes cryogenic liquid Nitrogen and high-pressure gaseous Argon and Krypton. The processing lead will work closely with engineering and other launch operations and satellite manufacturing teams to support final checkout, assembly, and integration activities at the Project Kuiper Payload Processing Facilities (PPFs).The technician performs satellite load and system test per propulsion test requirements, follows and provides feedback for operational procedures, implements process controls, and supports continuous improvement. This individual will work closely with engineering and other launch operations and satellite manufacturing teams.The ideal candidate is comfortable in a highly technical and collaborative setting and is able to follow and improve technical work instructions.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumKey job responsibilitiesAdhere to safety requirements, standards and procedures in all work locationsFinal assembly and test of the Kuiper satellites using various ground system in a clean-room and Electrostatic Discharge (ESD) controlled environmentLoad Krypton propellant into Kuiper satellites using computer controlled equipment (high pressure gases and cryogenic liquid in use)Independently execute assigned work to meet production schedulesUse precision calibrated tools – torque wrenches, multi-meters, micrometers and calipersPerform work according to engineering drawings and technical work instructionsCheck and inspect work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirementsCollaborate with engineers to develop and document activities, including continuous improvement opportunitiesPerform other duties, as assigned, to ensure an efficient, safe and effective work environmentAble to obtain and maintain licenses, and/or certifications as required by job responsibilities (i.e. forklift, crane)Mentor new and junior team membersWilling to work overtime and weekends as requiredShift schedule is nominally 5 days/week, 8 hours/day; may vary depending on production/launch schedulesMust be willing and able to perform extended travel up to 25% annually, either domestically or internationally, as business needs demandA day in the lifeThe processing lead technician will meet with their engineer and/or leader to plan objectives for the day and assign tasks to their team of technicians. They will then go onto the operations floor to process satellites according to work instructions provided by engineering using propellant loading ground support equipment. They will document completed work and report non-conformances to engineering as they occur. Periodically, they will perform maintenance on the ground and facility systems supporting propellant loading. They will be expected to cross train with all other launch operations work areas to support work surges and travel to other launch sites.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences.At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.BASIC QUALIFICATIONSHigh school diploma, GED, or equivalent experience 4+ years of experience in spaceflight hardware testing and assembly Ability to work effectively in a collaborative team environment Able to obtain and maintain a US Passport & must meet customs entry requirements to include but not limited to: Yellow Fever vaccine and other immunization requirements as recommended by the U.S. Centers for Disease Control and PreventionAbility to pass Kennedy Space Center background checks ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The success of Kuiper depends on the quality, reliability, cost, integration, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.Export Control Requirements: • Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.• Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.Key job responsibilities - Can apply a deep understanding of a broad range of tools, equipment, and handling machinery to accomplish your daily tasks effectively and efficiently - Upholds all safety requirements in all zones and work locations of responsibility- Assists in the development of new and junior team members and adheres to standards and procedures- Independently execute and prioritize work to meet production schedules- Integration and test of the Kuiper satellite and various complex sub-assemblies in a clean-room and Electrostatic Discharge (ESD) controlled environment- Rigging and critical lifts of bulky, sensitive flight hardware - Able to obtain and maintain licenses, operator permits, and/or certifications as required- Use precision calibrated tools – torque wrenches, multi-meters, optical inspection devices, micrometers and calipers- Read and interpret engineering drawings and technical documentation- Perform work according to procedures, specifications, and test instructions- Run functional and environmental testing on units, including some basic troubleshooting operations- Use computer software programs for controlling tests- Check and inspect your work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements- Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities- Perform other duties, as assigned, to ensure an efficient, safe and effective work environment- Willing to work overtime and weekends as required- Shift schedule will vary, depending on production/launch schedules- Must be willing and able to perform extended travel up to 25% annually, either domestically or internationally as business needs demandExport Control Requirements: • Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.• Candidates must be 18 years or older with the ability to understand and adhere to all job requirements and safety guidelines.A day in the lifeThe Processing Technician will lead work to ensure junior technicians complete tasks and ensure procedures are adhered to and work is completed during quality and operations on flight hardware integration processes. This position requires skill and experience in a variety of areas, including mechanical assembly, propellant loading, rigging, electrical checkouts and satellite troubleshooting. In short, you will be responsible for a majority of the most critical tasks to process & integrate the Kuiper satellite for launch, ensuring high quality, workmanship and safety standards are adhered to on a daily basis.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.BASIC QUALIFICATIONS• High school diploma, GED, or equivalent experience• 1-2+ years of experience in mechanical or electrical hardware assembly, test, and/or installation• Able to obtain and maintain a US Passport & must meet customs entry requirements to include but not limited to: Yellow Fever vaccine and other immunization requirements as recommended by the U.S. Centers for Disease Control and Prevention• Ability to pass Kennedy Space Center background checks ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed and reliable broadband connectivity to unserved and underserved communities around the world. We are looking for talented individuals to help process and prepare Kuiper satellites for launch.The success of Kuiper depends on the quality, reliability, cost, integration, throughput, and security of the products delivered. It is a fast-paced, dynamic environment. As part of the Kuiper team, you will support resolution of difficult problems that have high impact, and help create a brand new set of launch site processes and standards. To be successful you need to be highly motivated and detail oriented while maintaining the highest standards of execution.The processing technician will work as part of a team for receiving the hardware, processing satellites into the cleanroom, perform electrical test validation and battery charging, and other movements of the spacecraft through the workzone. The satellite operations consist of using with tools and equipment like overhead cranes and forklifts. The electrical test consists of operating a power supply system and requesting/reviewing data from the spacecraft. This individual with work closely with their peers and lead, engineers, and other cross-functional organizations.The ideal candidate is comfortable in a highly technical, fast-paced, and collaborative setting; is able to follow technical work instructions; and support the team through processing operations. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilitiesAdhere to safety requirements, standards and procedures in all work locations.Final assembly and test of the Kuiper satellites using various ground systems in a clean-room and Electrostatic Discharge (ESD) controlled environment.Verify satellite health using computer-controlled equipment to command and monitor satellite telemetry.Execute work assigned individually and/or with the team to meet production schedule. Use precision calibrated tools – torque wrenches, micrometers, and calipers.Use electrical test equipment tools -- multi-meters, breakout boxes, and harnesses.Perform overhead crane lift operations and use pallet jacks and forklifts for hardware movement.Perform work according to engineering drawings and technical work instructions.Check and inspect work after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements.Collaborate with leads, peers, and engineers to improve processes and activities.Perform other duties, as assigned, to ensure an efficient, safe and effective work environment.Able to obtain and maintain licenses, and/or certifications as required by job responsibilities (i.e. forklift, crane, electrical).Mentor new and junior team members, as needed.Willing to work overtime and weekends as required.Shift schedule is nominally 5 days/week, 8 hours/day but may vary depending on production/launch schedules.Must be willing and able to perform extended travel up to 25% annually, either domestically or internationally as business needs demand.A day in the lifeThe processing technician will meet with their team leads to understand objectives for the day. They will be processing satellites with mechanical and electrical ground support equipment per work instructions provided by engineering. They will document completed work and report non-conformances to their leads and engineering as they occur. Periodically, they will perform maintenance on the ground and facility systems supporting satellite movements. They will be expected to cross train with all other launch operations work areas, including mechanical areas, to support work surges and travel to other launch sites.About the teamHere at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences.At Amazon, our mission is to be the most customer-centric company on Earth. To get there, we need exceptionally talented, bright and driven people. We're dedicated to supporting new team members. Our team has a broad mix of experience levels and Amazon tenures, and we’re building an environment that celebrates knowledge sharing and mentorship.BASIC QUALIFICATIONSBasic qualifications :• High school diploma, GED, or equivalent experience.• 3+ years of experience in spaceflight hardware testing and assembly.• Ability to work effectively in a collaborative team environment.• Able to obtain and maintain a US Passport & must meet customs entry requirements to include but not limited to: Yellow Fever vaccine and other immunization requirements as recommended by the U.S. Centers for Disease Control and Prevention.• Ability to pass Kennedy Space Center background check. ...