Hardware Development

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.This role is for a highly dynamic and motivated individual that will work with manufacturing engineers to construct instructions and processes for technicians performing test operations. The Test Engineer will support both development and production testing of satellites, and their subsystems. The focus for this role will be in dynamics testing - both vibration table and acoustics. You will work with the designers, systems engineers and analysts to construct detailed work instructions for technicians performing environmental test operations. This role will be responsible for supporting the test team to ensure that tests are conducted in compliance with industry standards as well as internal work instructions. This includes reviewing post-test data, and performing root cause corrective actions for any failures. This position will have the opportunity to collaborate with cross-functional teams to lead process and lab improvement projects.Key job responsibilities-This position will work a 4x10 schedule, Sunday through Wednesday, 6:00 AM to 4:30 PM- Operate test consoles and work with engineering and technician teams to conduct dynamic testing- Review test plans and write work instructions for technicians to set up and execute testing - Analyze post test data and have the ability to write test reports of any non-compliant or off-nominal events- Review failure events and be able to perform root cause analysis and implement corrective actions- Assess safe working conditions and write Job Hazard Analyses for work areas- Ability and desire to work in a hands-on lab environment- Project management skills to accomplish technical projects that span cross functional teams- Establish and increase the efficiency of environmental test processes to maximize output and enable products to rapidly transition from engineering development to rate production- Establish production processes for 5S, FOD control, tool management, calibration procedures and visual management of production tooling and equipment- Enable production test autonomy by challenging requirements, simplifying work procedures, and automating actionsExport Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeThe Lab Engineer will assist in development and production satellite manufacturing in the environmental test domain. This position will join the team at an exciting moment, with an opportunity to help form the building blocks of creating a truly unique production system. We value data driven decision making, a comfort in dealing with ambiguous situations across multiple projects, and an ability to earn trust of various stakeholders to deliver high quality results.BASIC QUALIFICATIONS- Bachelors degree in Mechanical or Aerospace engineering, or equivalent- 2+ years hands-on environmental test experience, vibration, shock, acoustic in compliance with MIL-STD-810, SMC-S-016, or MIL-STD-1540- 2+ years working with Data Acquisition systems- Familiar with installing test instrumentation ...

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and data center operations — and we’re looking for talented people who want to help.You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.Do you love deconstructing problems to develop products that impact millions of people around the world? Would you enjoy identifying, defining, and building software solutions that revolutionize how businesses operate?Amazon Web Services Network Product Development team is responsible for the development, availability and lifecycle management of AWS Networking platforms. We are looking for Hardware Development Engineer to join a diverse group of software, network, and hardware engineers to design, deliver and operate our networking platforms for our data centers. The Software Developer on our team is responsible for re-defining the way we think about networking and infrastructure to enable our internal and external customers to continue to scale without limit on the largest, most reliable global infrastructure.We are looking for an innovative, self-motivated Hardware Developer with Ethernet networking experience in the areas of terabit switch fabrics, 10/40/100/400/800 gigabit interfaces, embedded CPU subsystems, and network processors. In this role the Hardware Engineer will be a hands-on technical lead responsible for reliability of AWS networking hardware in data centers. You will work with customers and partner teams to gather data, analyze, troubleshoot, root cause hardware and software issues. You will drive hardware and software changes that will directly improve user experience for millions of AWS customers. Come join us if you want to test your limits and tackle technical challenges you won't see anywhere else.Key job responsibilitiesOur engineers collaborate across diverse teams, projects, and environments to have a firsthand impact on our global customer base. You’ll bring a passion for hardware, software, innovation, data, quality, analytics and distributed systems. You’ll also:* Solve challenging technical problems, often ones not solved before, at every layer of the hardware and software stack* Design, implement, test, deploy and operate innovative and secure software and hardware solutions in the field of networking systems* Build high-quality, highly available, always-on products* Research implementations that deliver the best possible experiences for customers* Participate in on-call rotation and operational excellence activities, invent and implement ways to improve operational postureA day in the lifeHardware engineers within NPD could be working in a variety of areas, few examples would be: hardware design and development; building the systems that validate hardware quality in manufacturing; monitoring and improving hardware reliability in data centers; platform and operating system work. We cover everything from low level hardware to embedded software and systems that operate and monitor it. Operating at the scale we do, there is no blueprint for how to do what we do, which encourages our engineers to identify and develop simple solutions to complex problems. We encourage durable solutions that look around corners while taking into consideration our customer needs from a cost, performance, and reliability perspective. We work closely with our internal partners that design, build and operate the network to ensure that our solutions meet their needs and exceed their expectations.About the teamWithin AWS Networking the NPD (Network Product Development) organization is responsible for designing the hardware, building the software that power the global AWS network. Beyond product delivery we actively manage the fleet of switches and routers in a network that keeps growing. This means tracking key business and operational metrics to ensure that we operate smoothly and minimize or eliminate customer impact due to device related issues for a transparent AWS customer experience.Working at AWS in the Core Networking Team • Meet Matt, Director, Core Networking --- https://youtu.be/DqTStjRtjX4Why AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Diverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Our inclusive culture empowers Amazonians to deliver the best results for our customers. We not only celebrate the diversity of our workforce, we celebrate the diverse ways we work.BASIC QUALIFICATIONS- Bachelor's in electrical engineering or similar degree and 7+ years of non-internship professional hardware development/test experience- 5+ years of experience in Ethernet networking, working with embedded systems and SW, troubleshooting hardware issues- 5+ years of experience working with Linux - includes understanding fundamental commands, file system hierarchy, permissions, user management etc. Familiarity with tools such as ping, traceroute, tcpdump, ifconfig, ip link, ip route, arp, etc.- Good verbal and written communication skills- Ability to travel internationally ...

Amazon Web Services (AWS) internships are full-time (40 hours/week) for 12 consecutive weeks during summer. By applying to this position, your application will be considered for all locations we hire for in the United States.In Annapurna Labs we are at the forefront of hardware co-design not just in Amazon Web Services (AWS) but across the industry. The work we do is cutting-edge and internet-scale while also being deeply important to our customers. We design and build every component of our hardware and software to come together into products that our customers use for accelerated computing through Machine Learning acceleration and FPGA acceleration. If you are interested in "building a complete product" from inception to delighted customers, Annapurna is a fantastic choice.If this sounds exciting to you - come build the future with us!Responsibilities: • Develop a deep understanding of end customer requirements including software applications, use models, system architecture and SoC architecture/micro-architecture solutions.• Participate in logic design activities as part of Amazon's machine learning custom silicon solutions. • Develop and execute design automation mechanisms and flows.• Work with physical design teams to achieve performance and area requirements.Mentorship & Career GrowthOur team is dedicated to supporting new team members in an environment that celebrates knowledge sharing and mentorship. Projects and tasks are assigned in a way that leverages your strengths and helps you further develop your skillset.Inclusive Team CultureHere at AWS, we embrace our differences. We are committed to furthering our culture of inclusion. We have ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences.Work/Life HarmonyOur team puts a high value on work-life harmony. It isn’t about how many hours you spend at home or at work; it’s about the flow you establish that brings energy to both parts of your life. We believe striking the right balance between your personal and professional life is critical to life-long happiness and fulfillment. We offer flexibility and encourage you to find your own balance between your work and personal lives.BASIC QUALIFICATIONS- Enrolled in a Bachelors’ degree program or higher in Electrical Engineering, Computer Engineering, or a related field with a graduation conferral date between December 2025 and September 2026- Programming experience in System Verilog or UVM ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to these questions and you’ll fit right in here in the Automation Solutions team. We are a smart team of doers that work passionately to apply advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t imagine yet. We invent new improvements every day. The Automation Solutions team develops innovations that increase the efficiency of our fulfillment operations. Our products are deployed across the Amazon Fulfillment Network, automating material flow to reduce operational costs, increase throughput, reduce packaging, and enable consistent quality. Our products are integrated into broader solutions that sort, pack, and label items and packages globally. The Mechatronics and Sustainable Packaging organization is seeking a new member to join a dynamic team that provides leadership for concept development, architecture, and design of robotics systems and industrial equipment.Key job responsibilities- Define, expand, and explore the design space for complex, multidisciplinary robotics and automation problems- Identify and analyze the cross-functional tradeoffs between design alternatives, including impact on performance, schedule, cost, risk, complexity, and scale- Break down and frame problems using con-ops, use cases, structural/functional decomposition, and other system representations to clarify needs and align technical teams- Build quantitative models and analyses (Excel, FlexSIM, internal tools) to conduct trade studies, refine requirements, and understand key system drivers across the integrated systems of systems- Develop system concepts, cost estimates, risk assessments, and proposal documents that define the content and capabilities of automation solutions- Generating and rendering conceptual solutions for customer problems which may have no previous solution by using various CAD tools (2D and 3D).- Facilitate concept brainstorming and customer needs gathering exercises with little to no support from leadersA day in the lifeAn average day may include a mix of collaboration meetings to understand customer needs, reviews to obtain feedback on concepts, writing of technical white papers, and spending time designing in CAD to design layouts or 3D concepts for potential solutions.BASIC QUALIFICATIONS- Bachelor's of Science or equivalent in Electrical Engineering, Aerospace Engineering, Mechanical Engineering, Computer Science, Computer Engineering, Systems Engineering, Operations Research, Mathematics, Physics, or another STEM discipline- Experience with eliciting and clarifying business and end user needs, and connecting those needs to system concepts, requirements, and designs- Experience with technical collaborations and creating alignment across diverse groups (e.g. hardware engineering, software engineering, program management)- Experience with CAD, SolidWorks and/or similar tools to show layouts, tradeoffs, and sensitivities across multi-disciplinary systems- Ability to lead projects and partner effectively with product managers, engineering, operations and manufacturing to deliver solutions autonomously- Ability to solve complex technical problems at the architectural level ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? We apply advances in robotics and software to solve real-world problems that delight our customers' experiences in ways we can't even imagine yet. Amazon Robotics is located in the greater Boston area, the epicenter of robotics innovation. Our diverse team of engineers come from all over the world to design, test and build our dynamic fleet of robots and mechatronic systems. Having our offices, labs, test floors and factories all co-located means that we can design the hardware, write the code, test, build and watch it all come to life. This allows us to innovate quickly and on limitless ideas. Current advancements are underway in autonomous movement and mobility, artificial intelligence and machine learning, manipulation, simulation, robotic management software, predictive analytics, and much more. We are seeking a talented and motivated Product Development Engineer with a proven track record of implementing best in class processes within a complex design and manufacturing environment. This role will report to the Manager of Product Development and is an integral member of the Design Engineering Services team. You will be responsible for applying design for X (DFx) principles during new product introduction (NPI) of a wide range of products from initial concept to beta. You will work to integrate customer scaling requirements for safety, manufacturability, deployability, and supportability into new product designs. Additionally, you will work cross-functionally to develop best in class DFx feedback and services; guide product lifecycle changes, lead bill of material (BOM) strategy, lead technology feasibility and improvement projects, and drive to technical root cause utilizing advanced problem solving. The successful candidate will have extensive experience in both design and manufacturing combined with capability of making wide-ranging business decisions on behalf of the organization.Key job responsibilities - Actively support and foster a culture of inclusion. - Provide design for X guidance/feedback on electromechanical designs. - Guide best practices on manufacturing tolerances using GD&T. - Launch prototype tooling with accelerated schedules and assess project risk. - Leverage knowledge of multiple production processes to identify risk to programs and provide mitigation strategies. - Analyze new products dimensional data. - Drive internal and external DFMEA reviews. - Solve technical problems across a broad set of design and manufacturing commodities. - Mentor team members and design engineers. - Propose design changes that will enhance product manufacturability and testability. - Evaluate and approve Design Engineering Changes Orders (DECOs) and Engineering Change Orders (ECOs) - Implement best practices for engineering standards (ex. IPC-620 WHMA Class II) - Analyze NPI failures to identify root cause and drive improvements through future DFx cycles. - Effectively write White Papers (WP) and Manufacturing Concept Papers (MCP) to inform and influence teams and stakeholders - Take ownership to identify issues/problems and drives them to completion with little oversight - High level of attention to detail but flexibility to enable to business to move at a high velocity.- Navigate projects consisting of a high level of ambiguity and provide guidance to multiple partners. - Up to 30% travel required (domestic and international).A day in the lifeProduct Development Engineers work with many different internal and external organizations. We communicate frequently on technical topics with our design partners and NPI suppliers during the NPI process. We see ahead of curves and turns in the programs and prevent problems or risks from impacting our performance targets and goals.About the teamThe Design Engineering Services Team is made up of multiple talented individuals with various educational and practical experience backgrounds. This team has a strong desire to provide value to our stakeholders and evaluate the latest NPI techniques and manufacturing technologies to constantly improve and innovate. We do travel to manufacturers and evaluating prototypes as they are being made during NPI phases.Team members are encouraged to be highly independent; however, a strong support system is available to help any team members through problem solving phases.BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures- 5+ years of relevant industry experience in NPI with strong knowledge of manufacturing.- Bachelors degree in an engineering discipline, Mechanical, Systems, Robotics, Electrical, Manufacturing or suitable experience.- Proficient in 3D modeling software (ex: Solidworks) ...

Amazon Lab126 is an inventive research and development company that designs and engineers high-profile consumer electronics. Lab126 began in 2004 as a subsidiary of Amazon.com, Inc., originally creating the best-selling Kindle family of products. Since then, we have produced groundbreaking devices like Fire tablets, Fire TV and Amazon Echo. What will you help us create?As a Sr. Design Verification Engineer at Amazon, you will be part of an advanced engineering and research team that is building world class hardware for devices. The ideal candidate should have experience with RTL development environments, fluency in modern hardware description languages and verification methodologies. They should have experience verifying complex IP blocks from scratch that have successfully been integrated in SOCs or other such silicon that have been productized in consumer devices. We are looking for a self-driven individual who can work with architects, HW and SW developers and can quickly resolve blocking issues.Key job responsibilities- Define the verification methodology and implement the corresponding test bench infrastructure in advanced HVL to verify world class hardware- Communicate and work with team members across multiple disciplines- Deliver detailed test plans for verification of complex digital design blocks by working with design engineers and architects- Create and enhance constrained-random verification environments using SystemVerilog and UVM and write SVA.- Identify and write all types of coverage measures for stimulus and corner-cases- Debug tests with design engineers to deliver functionally correct design blocks- Close coverage measures to identify verification holes and to show progress towards tape-out- Participate in test plan and coverage reviewsBASIC QUALIFICATIONS- Bachelor’s degree or higher in EE, CE, or CS. - 7+ years of hands-on experience in Verilog, SystemVerilog, C/C++ based verification and UVM methodology- Experience developing UVM test bench, writing testplan, developing tests and verifying the design - Experience with writing directed/constrained-random tests. - Experience identifying bugs in architecture, functionality and performance with strong overall debug skills - Experience verifying at multiple levels of logic from SoCs to full system testing Experience with industry standard tools and scripting languages (Python or Perl) for automation ...

We are looking for an experienced Senior PLM Systems Development Engineer who combines a strong development and product lifecycle/configuration management background. This person will work closely with a team of top-notch satellite hardware engineers, as well as collaborating with our development and infrastructure teams. We are building enterprise tools to serve both immediate and long-term internal customer needs, and we’re doing it from within the teams we’re serving. A background in Product Lifecycle Management (PLM), Product Data Management (PDM), Computer Aided Design (CAD), mechanical design, or manufacturing engineering will serve you well in this environment.As a Senior Systems Development Engineer you will be expected to influence the business and technology direction of the team. You will have the ability to impact the goals of not only your direct team but partner teams and stakeholders as well. You will work with internal Kuiper Engineering customers to develop requirements for the feature gaps associated with their current enterprise tools, then architect, propose, develop, deploy, and support the resulting solutions.This is a hands-on position where your daily activities will range from strategic planning to new system development to supporting the customers that depend on your services. You will deliver consistent, well-defined results in a fast-paced systems development workflow. To succeed in this role, you will deliver on-time results that delight your customers while inspiring your team to think big about their work.Key job responsibilitiesInterface with all necessary individuals in supported departments in order to accurately identify shared and unique product data needs across the organization. Balance those requirements into a comprehensive product data management strategy.Translation of complex functional and technical requirements into detailed architecture and design documentation.Assist with guiding the development of engineering and enterprise-wide PLM and CM processes and workflows.Design, implement, test, deploy and maintain high quality, highly available, innovative software solutions to transform engineering workflows.Hands-on leadership for your team; working with others on the engineering team to guide the day-to-day development activities, leading architecture decisions, participating in designs, design reviews, and implementation.Utilize knowledge of development and service delivery best practices to lead design and development efforts for a team with a timeliness, security, and scalability mindset.Research implementations that deliver the best possible experiences for customers.BASIC QUALIFICATIONS- Bachelor's degree in a STEM field.- Experience leading the design, implementation, maintenance, and administration of CAD, PDM, or PLM systems, including driving standards and procedures.- Experience developing integrations between enterprise systems such as PLM and ERP.- 4+ years experience in systems engineering, product development, or technical product management.- 3+ years of programming experience with at least one modern language such as C++, C#, Java, Python, Golang.- 3+ years of experience with web application development.- 3+ years of experience with developing against SQL databases such as SQL Server, PostgreSQL, or MySQL.- 2+ years of experience contributing to the architecture and design of new and current systems.- Highly proficient in mechanical engineering configuration management and control.- Strong experience in communicating with various types of technical teams to collect requirements, describe product features and technical designs, and translating those across different disciplines in easy to understand ways.- Strong desire to build, sense of ownership, urgency, and drive. ...

Working at Amazon RoboticsAre you inspired by invention? Is problem solving through collaborative teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart, enthusiastic team of doers that work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t even image yet. We invent new improvements every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling and fun. Job Overview – As an Amazon Robotics mechanical engineer, you will develop innovative hardware designs for our emerging robotic systems and improve existing hardware to optimize performance and enhance customer experience. The ideal candidate has experience designing and analyzing mechanical systems, is enthusiastic about analytical problem solving, possesses practical knowledge of high volume manufacturing methods and is a role model for engineering best practices. This position reports directly to the Mechanical Engineering Manager. decisions.Key job responsibilitiesThe Mechanical Engineer will be responsible for: - Working with an interdisciplinary team to execute product designs from concept to production including specification, design, prototyping, validation and testing - Working with the Operations, Manufacturing, Supply Chain and Quality organizations as well as vendors to ensure a smooth product launch and sustaining - Writing functional specifications, design verification plans, and functional test procedures - Exhibit role model behaviors of thorough engineering analysis and cradle to grave ownership - Design and adaptation of holistic hardware solutions for ambiguous problems with fluid requirementsA day in the lifeAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include:1. Medical, Dental, and Vision Coverage2. Maternity and Parental Leave Options3. Paid Time Off (PTO)4. 401(k) PlanIf you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!BASIC QUALIFICATIONS- BS in Mechanical Engineering- SolidWorks or similar CAD experience, understanding of best practices for part design, advanced assemblies and complex configuration management- Hands on experience crafting proof-of-concept models and prototypes- Thorough understanding of principals, theories and concepts in mechanical engineering and ability to apply them to product design- Ability to effectively communicate concepts and write technical documents- Experience with full lifecycle and proficiency at completing tasks to meet milestones- Experience evaluating design, performance and logistical tradeoffs for hardware systems ...

AWS Utility Computing (UC) provides product innovations that continue to set AWS’s services and features apart in the industry. As a member of the UC organization, you’ll support the development and management of Compute, Database, Storage, Platform, and Productivity Apps services in AWS, including support for customers who require specialized security solutions for their cloud services. Additionally, this role may involve exposure to and experience with Amazon's growing suite of generative AI services and other cutting-edge cloud computing offerings across the AWS portfolio.Annapurna Labs (our organization within AWS UC) designs silicon and software that accelerates innovation. Customers choose us to create cloud solutions that solve challenges that were unimaginable a short time ago—even yesterday. Our custom chips, accelerators, and software stacks enable us to take on technical challenges that have never been seen before, and deliver results that help our customers change the world.Amazon Web Services provides a highly reliable, scalable, low-cost infrastructure platform in the cloud that powers hundreds of thousands of businesses in 190 countries around the world. We have data center locations in the U.S., Europe, Singapore, and Japan, and customers across all industries.Custom SoCs (System on Chip) live at the heart of AWS Machine Learning servers. As a member of the Cloud-Scale Machine Learning Acceleration team you’ll be responsible for the design and optimization of hardware in our data centers including AWS Inferentia, Trainium Systems (our custom designed machine learning inference and training datacenter servers). Our success depends on our world-class server infrastructure; we’re handling massive scale and rapid integration of emergent technologies. We’re looking for an ASIC Physical Design Methodology Engineer to help us trail-blaze new technologies and architectures, while ensuring high design quality and making the right trade-offs.Key job responsibilitiesDefine, develop and deploy innovative physical design methodologies (RTL2GDS) and CAD flows for ML Accelerator chips in advanced nodesDrive improvement in RTL2GDS flows/methodology for PPA and TAT improvementsCreate Dashboard and Central reports for project tracking and visualizing QoR/statsFine tune cloud infrastructure to improve turnaround times for physical design work.Interface directly with RTL, Physical Design, Package Design, DFT and other teams to improve methodologies and efficiencies and drive efforts to resolution.Work with EDA tool vendors to evaluate new methods, solve bugs, improve usability, etc.Drive setting up RTL2GDS flows for new nodes, run regressions, quality assurance checksAbout the teamAbout the teamOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge-sharing and mentorship. Our senior members enjoy one-on-one mentoring and thorough, but kind, code reviews. We care about your career growth and strive to assign projects that help our team members develop your engineering expertise so you feel empowered to take on more complex tasks in the future.Diverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.About AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- BS + 10yrs or MS + 7yrs in EE/CS- 5+ years of experience in developing physical design methodology or CAD flows in synthesis, PNR, and sign-off areas for advanced technology nodes. - Proficient in programming/scripting languages (Perl, Python, C++)- Solid understanding of ASIC physical design, and methodologies including synthesis, place and route, STA, IR, formal and physical verification. - Demonstrated level of expertise in PD tools such as Innovus, ICC2, Fusion Compiler, STA, and Sign-Off. - Proven track record of delivering metric driven PPA flow development and support. ...

Annapurna Labs was a startup company acquired by AWS in 2015, and is now fully integrated. If AWS is an infrastructure company, then think Annapurna Labs as the infrastructure provider of AWS. Our org covers multiple disciplines including silicon engineering, hardware design and verification, software, and operations. AWS Nitro, ENA, EFA, Graviton and F1 EC2 Instances, AWS Neuron, Inferentia and Trainium ML Accelerators, and in storage with scalable NVMe, are some of the products we have delivered, over the last few years.In Annapurna Labs we are at the forefront of hardware/software co-design not just in Amazon Web Services (AWS) but across the industry. The Machine Learning System Operations and Automation Team is looking for candidates interested in writing automation software for our "fleet" of Machine Learning servers deployed around the world. Do you like solving mysteries? Great! Figuring out what that light switch with no obvious function actually does? Me too! Are you wearing a smartwatch to monitor your sleep and activity over time to optimize your routines? You'll fit right in. Does the word exabyte excite you? Let's get to work. Our team writes truly massive scale autonomous software to monitor, optimize, and remediate hardware in the most advanced servers in the world. Come join us!Key job responsibilities- Member of a team responsible for system remediation, operational excellence, and customer experience on bleeding edge ML products- Utilize data to root cause hardware failures and identify live trends on the most complex systems in AWS- Implement and improve system level testing across the product lifecycle- Develop software which can be maintained, improved upon, documented, tested, and reused- Dive deep on issues at the intersection of hardware and softwareA day in the lifeThe MLA Systems Fleet Triage team is responsible for identifying and responding to the most challenging hardware and software failures from ML optimized servers at scale. We work in tandem with hardware design, firmware, and validation teams to improve test coverage and detection in production environments.As you design and code solutions to help our team drive efficiencies in software architecture, you’ll create metrics, implement automation and other improvements, and resolve the root cause of software defects. You’ll also:- Build high-impact solutions to deliver to our large customer base.- Participate in design discussions, code review, and communicate with internal and external stakeholders.- Work cross-functionally to help drive business decisions with your technical input.- Work in a startup-like development environment, where you’re always working on the most important stuff.About the teamOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge-sharing and mentorship. Our senior members enjoy one-on-one mentoring and thorough, but kind, code reviews. We care about your career growth and strive to assign projects that help our team members develop your engineering expertise so you feel empowered to take on more complex tasks in the future.Diverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.About AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- 2+ years of non-internship professional software development experience- 1+ years of designing or architecting (design patterns, reliability and scaling) of new and existing systems experience- 3+ years of administrative experience in networking, storage systems, operating systems and hands-on systems engineering experience- Knowledge of systems engineering fundamentals (networking, storage, operating systems)- Experience programming with at least one modern language such as C++, C#, Java, Python, Golang, PowerShell, Ruby ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Kuiper Government Engineering team is a multi-disciplinary technology team involved in developing and delivering targeted and scalable solutions for custom satellite and ground applications. The Government Engineering team works closely with the core Kuiper team, and addresses the needs of specific customers (such as government agencies). The Senior Mechanical Engineer will play a pivotal role in the team delivering innovative and fast-paced analysis and design for both space and ground systems and sub-systems. The Senior Mechanical Engineer will have a background in space based and ground based mechanical design and analysis including electro-mechanical systems integration. The ideal candidate has experience making major optimization trades for payloads and system architectures. This is a hands-on role for a highly collaborative individual that combines superb technical and analytical capabilities to convert analytic trade studies to a space qualified payload, while meeting cross discipline requirements. The candidate will have a sharp focus on the specific needs of the customer and be able to conduct or direct the thermal and structural analyses to show that proposed solutions will meet the customer’s goals. The successful candidate will have demonstrated experience working on complex programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). The candidate will exhibit the potential to lead small sub-teams of mechanical engineers, and be able to prepare easy-to-read and technically compelling written reports.Key job responsibilities- Perform mechanical design and layout trade studies for satellite payloads or structures, ground based communication equipment, and test support hardware contributing to overall system architecture including inputs and requirements from cross discipline teams - Electrical, RF, Optical, Thermal, Dynamics, Mechanisms, Materials, Manufacturing, Assembly, and Test- Conduct or oversee structural and thermal analysis via finite element methods as needed to support design work and to demonstrate that technical solutions will meet the needs and requirements of the customer’s mission and application- Facilitate cost trades on multiple parallel configurations for cost/manufacturability vs design uncertainty- Generate detailed designs via CAD systems and engineering drawings with appropriate geometric dimensioning and tolerancing (GD&T)- Deliver well-written documentation, reports, and presentations for technical design reviews and as part of proposal efforts- Design and support test campaigns, both development and qualification/acceptance, for space hardware.- Interact directly with customers to understand technical requirements, and translate them into technically robust solutions backed by data and analysisSecurity Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.BASIC QUALIFICATIONS- BSME from ABET accredited university- 8+ years experience as a mechanical engineer and designer- 1+ years experience with structural engineering analysis methods and tools- 1+ years experience with thermal engineering analysis and tools ...

The Amazon Robotics (AR) Operations organization oversees the manufacturing of high-quality robotics and gets the right materials to the right place at the right time to enable our automated solutions. It’s a fast-paced operation that works cross-functionally with teams across Amazon globally, and is driven by data and performance indicators. We are seeking a talented and motivated Manufacturing Test Support Engineer with a proven track record of implementing best in class test techniques and processes within a complex manufacturing environment. This role will report to the Manager of Sustaining Test Development and is a member of the Robotics Manufacturing Technical Operations team. This position will primarily focus on continuous improvement, root cause investigation, & support for manufacturing test systems. You will work closely with engineering, production, test engineers, and external vendors to deliver and support the highest quality products with the lowest cost.Key job responsibilities* Actively support and foster a culture of inclusion. * Provide triage and investigation of novel manufacturing test issues on the production lines. * Analyze RMA units to determine failure root cause and corrective actions. * Drive continuous improvements in both test and repair processes. * Deploy new or duplicate systems to support test, calibration, and component upgrades. * Develop and execute a test system maintenance strategy, including backups, quick installs, system upgrades, patching, and disaster recovery. * Assist with editing and validating test system work instructions. * Develop training plans for test operators. * Write scripts to automate manual computer tasks. * Debug and analyze wired and wireless networking issues. * Promote a safe working environment by following all safety procedures. * Use basic hand tools to replace and repair electro-mechanical assemblies. * Support on-site production lines as well as test stations at local contract manufacturers.A day in the lifeThis is a sustaining support engineering role which focuses on the maintenance of test systems used throughout the manufacturing process. We want to reduce downtime. The engineer may be the first line of defense on high severity tickets. It requires a fundamental amount of technical knowhow across a breadth of disciplines: electrical, mechanical, software, and information technology (computers and networking). There is also some data analysis required to understand problems better. Work can range from reviewing test results, to documentation updates, to replacing parts on test systems, to reinstalling applications onto the test computers, etc.About the teamThe Manufacturing Test and Controls (MTAC) Product Sustaining and Support Engineering (PSSE) team owns test engineering transition of all products in near-beta-exit status, standardization, documentation, safety and training requirements. Additionally, it leads continuous improvement programs for enhanced yield and productivity, coordinate cross-site knowledge transfer during geographical expansions, and acts as Point Of Contact (POC) for Keep The Lights On (KTLO) activities on all GA products. This team prioritizes the rapid response and consistency. BASIC QUALIFICATIONS* 4 year degree in engineering or 2 year technical degree with 2+ years of relevant work experience. * Solid working knowledge of basic electrical equipment, including digital multimeters, oscilloscopes, and power supplies. * Capability to read and interpret engineering drawings and electrical schematics. * Ability to work independently with limited supervision. * Ability to manage multiple high-priority tasks simultaneously. * Experience with Windows and/or Linux operating systems. * Knowledge and/or working experience with networking and wireless computer systems. ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart team of doers that work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t even imagine yet. We invent new improvements every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling and fun.Amazon Robotics empowers a smarter, faster, more consistent customer experience through automation. Amazon Robotics automates fulfilment center operations using various methods of robotic technology including autonomous mobile robots, sophisticated control software, language perception, power management, computer vision, depth sensing, machine learning, object recognition, and semantic understanding of commands. Amazon Robotics has a dedicated focus on research and development to continuously explore new opportunities to extend its product lines into new areas. Amazon Robotics co-op opportunities will be based out of the Greater Boston Area in our two state-of-the-art facilities in Westborough, MA and North Reading, MA. Both campuses provide a unique opportunity to have direct access to robotics testing labs and manufacturing facilities.This role is a minimum 6 month co-op ranging from May/June-December 2025.The Process Engineering Team is responsible for continuous improvement in the manufacturing areas focusing on safety, delivery, quality and cost. The team also works with other internal and external Amazon engineering departments helping develop manufacturing solutions for new products.Key job responsibilities• Manage the development of Packaging concepts with preferred Packaging Vendors and Component part Suppliers.• Coordinate packaging performance testing, qualifications and validations per ISTA standards.• Plan and direct activities concerned with design and development of packaging: Analyze engineering drawings and specifications of product to determine physical characteristics of component, special handling and safety requirements.• Direct development of sketches, specifications, samples and written analyses of proposed packaging solutions for design approvals from cross functional groups.• Provide optimum trailer loading configuration to Logistics partners to maximize cubing efficiency.• Create, update, and maintain all packaging specific part numbers in PLM system. A day in the lifeIf you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!About the teamThe Process Engineering Team is responsible for continuous improvement in the manufacturing areas focusing on safety, delivery, quality and cost. The team also works with other internal and external Amazon engineering departments helping develop manufacturing solutions for new products. BASIC QUALIFICATIONS- Currently enrolled in Packaging Science Program or Mechanical /Industrial Engineering program with a Packaging Minor or interest- Familiar with packaging base materials and systems- SolidWorks and AutoCAD Design background- Ability to review, write and implement packaging SOP’s and WI’s- Excellent analytical and problem-solving skills- Be comfortable working in a fast pace environment with constant project ambiguity and churn.- Junior year or above in Engineering program- Currently enrolled in College/University and must have at least one semester/term/quarter of school left to complete after the end of the co-op- May 2026 graduation date or later- Must be eligible and available for a full-time (40h / week) internship from May/June- December 2025 ...

Join the team which delivers highly differentiated silicon into Blink and Ring battery powered devices. Our team works on state-of-the art SoCs in a vertically integrated team environment to deliver products our customers love. Innovators will be delighted with our integrated verification/validation environment that is used to perform architectural modeling to post-silicon validation. The team works backwards from customer requirements to build super-low power, energy efficient designs that include the latest in AI, video processing, low power communications and CMOS fabrication technology.Key job responsibilities- Evaluate 3rd party IP blocks- Estimate power, performance, and area for significant IPs early in design cycle- Execute on design specifications to deliver high quality RTL- Ensure quality by running and tracking results of front-end tools including: Synthesis, Lint (RTL, DFT, UPF), Power Analysis and STA- Work with pre-silicon verification teams to assist in defining test-plans/test-benches- Work with post-silicon validation teams to define and execute on test-plans- Write high quality documents to guide a scalable teamBASIC QUALIFICATIONS- Bachelor's degree in Electrical Engineering, Communications Engineering or related field, or equivalent experience- 5+ years of experience in digital design- Experience with products that have gone to volume production- Hands on experience in low power design techniques- Strong written and verbal skills- Experience writing and reviewing design specifications ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Project Kuiper is seeking a Production Supervisor to join the Mixed Model Assembly group to support production. This role will work closely with management to supervise a technician team that supports the assembly of production hardware. The individual will have strong leadership skills and be required to work on multiple projects in a fast-paced environment where communication and organization will be critical. This position will also utilize a variety of analytical tools as well as aid in creating a variety of production processes which they will help to draft and maintain. This will require supervisory duties as well as working as an operator in the MMA Pod. Key job responsibilities- Build and test components and assemblies in development and production environments. - Supervise a team of technicians focused on early production and scaling output.- Work with management to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.- Work cross-functionally with management, facilities, and supply chain to maintain operations and materials in the MMA area- Ability to provide timely feedback on designs, processes, and custom equipment used in routine prototyping, fabrication, and characterization.- Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.- Review and approve rework to ensure accuracy and enforce traceability.- Comply with all Company Policies including Health, Safety, and Environmental Regulations, Personal Protective Equipment Requirements, and Standard Operating Procedures.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeA Production Supervisor in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite. You will have to be comfortable in a high paced environment and be able to multitask while still being able to produce high quality work. You will be leading a group of technicians expected to assemble and deliver hardware at a high rate while maintaining quality. You will be working to constantly improve processes that will make impacts on the efficiency of the group. You will also play a key role in the career growth of technicians on your team. BASIC QUALIFICATIONS- 2+ years’ experience in Clean Room Manufacturing environment.- 2+ years’ experience of supervisory experience.- 2+ years’ experience in Assembly / Test- 4+ Experience manufacturing in high traceability environment ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Project Kuiper is seeking a Cleanroom Supervisor to join the Optical group within Production. This role will report to the Value Stream Leader and work closely with them to supervise a technician team that supports prototyping and manufacturing of all components and assembly of novel optical laser devices. The individual will have strong leadership skills and be required to work on multiple projects in a fast-paced environment where communication and organization will be critical. This position will also utilize a variety of analytical tools as well as aid in creating a variety of laboratory procedures which they will help to draft and maintain. This will require supervisory duties as well as working as an operator in the clean room. Key job responsibilities- Manufacture and assemble optical prototypes in an ISO 7/8 Environment, ensuring compliance with applicable standards.- Supervise a team of technicians focused on early production and scaling output.- Work with Senior Manager to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.- Work cross-functionally with management, facilities, and supply chain to maintain operations and materials for an ISO 7/8 cleanroom.- Ability to provide timely feedback on designs, processes, and custom equipment used in routine prototyping, fabrication, and characterization.- Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.- Review and approve rework to ensure accuracy and enforce traceability.- Comply with all Company Policies including Health, Safety, and Environmental Regulations, Personal Protective Equipment Requirements, and Standard Operating Procedures.- Able to accommodate flexible working hours. (Current shift: 2nd shift - Wednesday to Saturday, 5:00 pm - 3:30am)Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.About the teamThis is a fast-paced, intellectually challenging position, and you’ll work with leaders in multiple technology areas. You will have relentlessly high standards for yourself and everyone you work with, and be constantly looking for ways to improve your product’s performance, quality and cost. We are building out a new production team which includes multiple shifts of work. The ideal candidate will be flexible to work day or evening shifts. BASIC QUALIFICATIONS- 1+ years’ experience of supervisory experience.- 5+ Experience manufacturing in high traceability environment (AS9100 Aerospace, IS0-13485 Medical or other equivalent) ...

Amazon is building the next generation software, hardware, and processes that will run the global network of fulfillment centers that move many millions of units of inventory, and ensure that customers get what they want when we promised. We do this by building automated solutions to handle things that technology does well, while relying on people to handle things that humans do well. We are constantly innovating in the ways we are automating and accelerating the delivery of products and packages which includes building custom hardware and applying robotics, autonomy, supply chain optimization, machine learning, manipulation, image processing, and real-time data processing using distributed systems. The WW Technology Deployment org is seeking a talented and solutions-oriented NPI Technical Program Manager to contribute to delivering transformational innovation to the business. You will be part of a team with the mission to ensure that robotics technologies maturing through the development pipeline are vetted and tested in the field, during Alpha and Beta deployments, to identify and resolve issues upstream before deployments at scale. This role is a key part of a technical team, with the following responsibilities:Key job responsibilities• Lead strategic Deployment Readiness projects with significant technical depth and breadth;• New Product Introduction (NPI) TPM acts as the leader for new Robotics solutions during pre-GA phases, planning, scheduling and executing Alpha and Beta deployments;• End-to-end ownership of large-scale Robotics deployment projects and delivery including resources, CAPEX, schedule and vendor management;• Provide iterative feedback on Work Instructions and execution plans to achieve consistent outputs;• Complex stakeholder management: work very closely with the Real Estate, IT, launch and Operations teams from project start to end;• Manage large third-party installation teams during the execution of Alpha and Beta deployments;• Lead technical design reviews and propose design solutions for material handling and storage solutions that meet both business needs and leverage global design standardization;• Ensure compliance with safety and quality standards;• Drive alignment of New Product Introduction strategy with internal stakeholders and external partners;• Communicate project status, drive and elevate decision making and help requests;• Travel requirement for this role is up to 75%BASIC QUALIFICATIONS- 3+ years of technical product or program management experience- 2+ years of software development experience- 3+ years of project management disciplines including scope, schedule, budget, quality, along with risk and critical path management experience- Experience managing programs across cross functional teams, building processes and coordinating release schedules- Bachelor's degree in engineering, computer science or equivalent- • Experience leading overall end-to-end project delivery including resources, CAPEX, schedule and vendor management ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. This position is for a front line support Manufacturing Engineer who will be addressing non-conformance issues and providing in person support to ensure the production line continues to move smoothly Key job responsibilities*** 1st Shift Schedule Hours: 6:30AM - 2:30PM****- Write work instructions, troubleshoot non-conformances and help execute critical satellite assembly build and test campaigns, including hands-on work.- Definition & implementation of Work Order and standard operating procedures- Assist with developing manufacturing processes for automated quality SPC.- Specify, design and help procure various assembly equipment, tools and systems to meet program development requirements - AIT takt time & cost optimization planning- Review designs for manufacturability and sign off for design release- Must be willing to work off shifts and weekends as required.Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the lifeA Manufacturing Engineer in this role will be supporting the technician team by resolving any obstacles and working with responsible engineers to disposition non-conformances. This individual will work closely with engineering teams in specifying and building or procuring tools and line equipment for Kuiper hardware builds. The successful candidate has some basic experience in supporting production of space hardware through development, QTP (qualification test procedures), and flight hardware ATP (acceptance test procedures).BASIC QUALIFICATIONS- Bachelor's Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience.- 1+ year experience with integrating, testing and troubleshooting mechanical and electronic systems- 1+ year experience with Computer Aided Design tools such as Solidworks or NX/Unigraphics ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Have you ever wanted to become involved in the global development and rollout of satellite earth stations for a high-performance satellite constellation? We are looking for a hands-on and experienced Satellite Communications ground integration and test engineer to join Project Kuiper's ground systems team. You be a key contributor in the rollout, integration, test, and troubleshooting of the Kuiper Ground Gateway systems. The role will become the key subject matter expert in the development, scale, and execution of our highly efficient Ground Gateway build strategy. Kuiper ground gateway are deployed to enable our low-latency, high-speed broadband satellite communication constellation allowing Amazon to serve un-served and under-served communities around the world.Key job responsibilitiesIn this role you will:- Become a key member of the Ground Systems Integration and test team working directly with our site build teams.- Lead development, integration, and ongoing build operations of ground gateway antenna and terminal test systems, both fielded and in build.- Work closely with implementation teams to troubleshoot issues, perform data driven analysis of results, and make recommendations for improvements and corrective actions.- Support the rest of the Ground Systems team along with our suppliers in the identification and execution of design corrective actions improve site build defects and improve site built automation efforts- Lead in the development of optimized field deployment integration and operational readiness test programs - Lead in the development of automated tests that further improve in site build defect discovery and correction enabling deployment of Kuiper’s innovative Ground Gateway System- Communicate regularly on status, risk, and change control.- Help teams reduce exposure to classic failure modes.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Integration and Test Engineer, you will provide leadership supporting execution of Kuiper’s ground integration and site build test activities. You will become a subject matter expert on the Kuiper ground system design and will be called upon frequently as such to support critical troubleshooting activities. You will help develop and will work extensively with the Gateway terminal test systems to validate supplier product updates relative to site deployment and troubleshoot system issues.About the teamThe Ground Systems team is responsible for the architecture, design, build, and installation of Kuiper’s Ground and TT&C Gateways. Our Ground Gateways enable high data rate, low latency communications between Kuiper points of presence and our Low Earth Orbit Satellite constellation. The team works closely with Ground Infrastructure Services, Networks, Regulatory, Payload Test, and RF Systems teams to ensure Kuiper provides a seamless customer experience.BASIC QUALIFICATIONS- 6+ years in integration and test and/or product verification and validation roles- 2+ years using RF and Network test equipment associated with SATCOM communications- 2+ years in development and deployment of automated tests- Bachelor's degree in Engineering or equivalent experience-education ...

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.We are seeking a senior leader in Hardware Development for the Edge and Specialized Hardware (ESH) team to lead a group that is defining and executing server and rack designs across generations of compute and storage platforms for our cloud. You will own the strategy and oversee the development and management of the product roadmaps based on it. This is a fast-paced, intellectually challenging position for a highly experienced professional. You’ll work with thought leaders in multiple technology areas. You will partner with our AWS services owners (EC2, EBS, S3, etc.) to inform their architectures and product offerings, and drive adoption of innovative technologies. You will influence suppliers’ roadmaps and partner with them to launch custom products.You must have relentlessly high standards for yourself and everyone you work with, and you must be constantly looking for ways to improve your products’ performance, quality, and cost. Attention to details, creativity, depth of industry knowledge, and a well-trained business sense are a must. We’re continuously changing the industry we are in. We want a leader who is ready for this challenge, and wants to reach beyond what is possible today.The successful candidate must have experience building and leading Hardware Development team(s) in a fast-paced environment. The candidate must be highly technical, analytical, effective in a matrix organization, and adept at synthesizing a variety of technologies and capabilities. Key Responsibilities: - Drive the vision and execution of the ESH hardware product roadmap - Digest technical trends, how they impact the business, and develop roadmaps that enables the latest technology needed for our cloud - Prioritize and plan the execution of the roadmap - Resolve challenges – making trade-offs to balance between the business and the technical needs - Hire and develop a team of world-class hardware developers, providing guidance and direction to achieve the product vision - Make business decisions around build vs. buy, cost vs. cycle time, performance vs. cost, power vs. performance etc. to optimize our portfolio of products across our cloudAmazon.com is an Equal Opportunity Employer – Minority / Women / Disability / Veteran / Gender Identity / Sexual Orientation / Age.About the team*Why AWS*Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.*Diverse Experiences*Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.*Work/Life Balance*We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.*Inclusive Team Culture*Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.*Mentorship and Career Growth*We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS - Bachelor’s degree or higher in Electrical Engineering, Mechanical Engineering, or equivalent. - Hands-on experience in designing, developing and operationally supporting high volume enterprise servers. - 7+ years of experience leading multi-discipline hardware development teams. - Hands-on experience with system-level analysis. - Proven track record of taking ownership and successfully delivering results in a fast-paced, dynamic environment. ...