Hardware Development

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.The Kuiper Manufacturing Quality team is driven to develop a Kuiper Quality System that is capable of scaling aerospace quality to volume and cost levels to meet end customer needs. This position will join at a time of ramping production and be ready to jump into solve issues directly affecting the production line.Key job responsibilitiesThis position will work a 4x10 schedule, Wednesday to Saturday, 5:00 PM to 3:30 AM- Review and approve Nonconformance Reports submitted during the build and test of satellite products. - Create and submit Nonconformance reports for review and approval when defects are found either through inspection or through containment activities. - Perform process and product audits on the floor to ensure products are being built in accordance with engineering specifications and business requirements. - Transpose engineering drawing and specification requirements into inspection and quality control processes during assembly to ensure product requirements- Participate in shift stand up meetings representing Quality to ensure relevant information is shared between manufacturing personnel and quality team members. - Support Quality inspectors and manufacturing technicians to provide direction in ambiguous inspection/requirement activities, and provide quality perspective on product defects.- Perform relevant containment activities when notice of escapes or batch defects are found on material, ensuring material is controlled and written up for disposition.- Interpret engineering drawing requirements into acceptability determination for products on the floor.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifePerform daily defect investigation and resolution for assigned product familiesInvestigates product issues and determine disposition for nonconformancesRepresent quality on the floor when issues arise.Perform process and product audits to ensure compliance to QMS and product requirementsAs defect trends are identified, perform product containment exercises, notice of escapes, and screening activities to ensure that product nonconformances are addressed. Develop standard nonconformance processes to use within the manufacturing teams in order to drive efficiency in the nonconformance process.BASIC QUALIFICATIONS- BS degree in mechanical engineering or equivalent- 1-3+ years of Quality Engineer experience with oversight of product assembly lines, including representation in MRB decisions. ...

By applying to this position, your application will be considered for all locations we hire for in the United States.In Annapurna Labs we are at the forefront of hardware co-design not just in Amazon Web Services (AWS) but across the industry. The work we do is cutting-edge and internet-scale while also being deeply important to our customers. We design and build every component of our hardware and software to come together into products that our customers use for accelerated computing: either Machine Learning acceleration, or FPGA acceleration.As a member of the Cloud-Scale Machine Learning Acceleration team, you will be responsible for the design and optimization of hardware in our data centers including technologies such as AWS Inferentia, which is a machine learning inference product designed to deliver high performance at low cost.If you are interested in "building a complete product" from inception to delighted customers, Annapurna is a fantastic choice.If this sounds exciting to you - come build the future with us!Key job responsibilities• Be part of hardware design team for acceleration cards, servers, and electrical validation for silicon• Work on schematic design for new acceleration cards• Be involved with AWS Servers testing• Participate in modeling and simulation of interconnectsBASIC QUALIFICATIONS• Bachelors’ degree or higher in Electrical Engineering, Computer Engineering, or a related field with a graduation conferral date between December 2022 and September 2025• Academic, internship, or professional experience with schematic design and layout review of PCBs• Academic, internship, or professional experience with x86 system design and microcontroller programming• Familiarity with oscilloscope and multimeters ...

AWS Utility Computing (UC) provides product innovations that continue to set AWS’s services and features apart in the industry. As a member of the UC organization, you’ll support the development and management of Compute, Database, Storage, Platform, and Productivity Apps services in AWS, including support for customers who require specialized security solutions for their cloud services. Additionally, this role may involve exposure to and experience with Amazon's growing suite of generative AI services and other cutting-edge cloud computing offerings across the AWS portfolio.Annapurna Labs (our organization within AWS UC) designs silicon and software that accelerates innovation. Customers choose us to create cloud solutions that solve challenges that were unimaginable a short time ago—even yesterday. Our custom chips, accelerators, and software stacks enable us to take on technical challenges that have never been seen before, and deliver results that help our customers change the world.Amazon Web Services provides a highly reliable, scalable, low-cost infrastructure platform in the cloud that powers hundreds of thousands of businesses in 190 countries around the world. We have data center locations in the U.S., Europe, Singapore, and Japan, and customers across all industries.Custom SoCs (System on Chip) live at the heart of AWS Machine Learning servers. As a member of the Cloud-Scale Machine Learning Acceleration team you’ll be responsible for the design and optimization of hardware in our data centers including AWS Inferentia, Trainium Systems (our custom designed machine learning inference and training datacenter servers). Our success depends on our world-class server infrastructure; we’re handling massive scale and rapid integration of emergent technologies. We’re looking for an ASIC Physical Design Methodology Engineer to help us trail-blaze new technologies and architectures, while ensuring high design quality and making the right trade-offs.Key job responsibilitiesDefine, develop and deploy innovative physical design methodologies (RTL2GDS) and CAD flows for ML Accelerator chips in advanced nodesDrive improvement in RTL2GDS flows/methodology for PPA and TAT improvementsCreate Dashboard and Central reports for project tracking and visualizing QoR/statsFine tune cloud infrastructure to improve turnaround times for physical design work.Interface directly with RTL, Physical Design, Package Design, DFT and other teams to improve methodologies and efficiencies and drive efforts to resolution.Work with EDA tool vendors to evaluate new methods, solve bugs, improve usability, etc.Drive setting up RTL2GDS flows for new nodes, run regressions, quality assurance checksAbout the teamAbout the teamOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge-sharing and mentorship. Our senior members enjoy one-on-one mentoring and thorough, but kind, code reviews. We care about your career growth and strive to assign projects that help our team members develop your engineering expertise so you feel empowered to take on more complex tasks in the future.Diverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.About AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- BS + 10yrs or MS + 7yrs in EE/CS- 5+ years of experience in developing physical design methodology or CAD flows in synthesis, PNR, and sign-off areas for advanced technology nodes. - Proficient in programming/scripting languages (Perl, Python, C++)- Solid understanding of ASIC physical design, and methodologies including synthesis, place and route, STA, IR, formal and physical verification. - Demonstrated level of expertise in PD tools such as Innovus, ICC2, Fusion Compiler, STA, and Sign-Off. - Proven track record of delivering metric driven PPA flow development and support. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that willprovide low-latency, high-speed broadband connectivity to unserved and underservedcommunities around the world. Come work at Amazon!As a Sr. Payload I&T Engineer, you will be responsible for integration and test activities for various payload related features for the Kuiper satellite , ground gateway and the customer terminals.You will work closely with colleagues throughout Project Kuiper’s wide-ranging, inter-disciplinary team to support both lab payload testing and troubleshooting and reproducing on-orbit issues in the lab. This will include test definition, execution, optimization and reporting of test data. You must be flexible, responsive, and able to succeed within a fast-paced and collaborative environment.As a senior member of the Payload Integration and Test team, you will be responsible for verification and validation of the satellite payload including the ground gateway and customer terminals. This includes everything from integrating new features in lab with test equipment to getting features working end to end including ground service with the expected performance.Responsibilities: - Conceptualize and execute a test campaign with functionality and performance. Engage with systems, hardware, and software development engineering teams to accomplish the following in pursuit of integration and testing: capture requirements, define use cases, work backwards from product strategy.- End to end functional and performance testing to include ground equipment, satellite, customer terminals and cloud services. - Expand test coverage in lab by integrating with test equipment and collaborating closely with test equipment vendors.- Troubleshoot deeply: anticipate failures, collect data, analyze log files, compare models to observed behavior, root cause.- Troubleshoot and root cause MAC to application layer throughput degradation and packet losses across the system.- Support and reproduce on orbit functional and performance issues in the lab.- Draft and maintain high quality documentation for program-level feedback: test verification matrix, status tracking, test runs for record.- Enhance testing efficiency by automating test execution and analysis.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen ornational, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into theU.S. as a refugee or granted asylum. BASIC QUALIFICATIONS- Bachelor's degree in electrical engineering, computer engineering, computer science or equivalent experience.- 10+ years of satellite and/or cellular lab testing experience.- Experience with Linux, basic networking skills, and RF lab equipment configuration.- Experience with test development in Python or similar language. ...

The Amazon Robotics team is seeking broad, curious engineers to join our robotic manipulation team. We holistically design, build, and deliver end-to-end robotic systems. Our team is also responsible for core infrastructure and tools that serve as the backbone of our robotic applications, enabling roboticists, machine learning scientists, software engineers, and hardware engineers to deploy systems in the field.The Amazon Robotics team builds high-performance, real-time robotic systems that can perceive, learn, and act intelligently alongside humans - at Amazon scale. Our mission is to enable robots to interact safely, efficiently, and fluently with the clutter and uncertainty of real-world fulfillment centers. We hire and develop subject matter experts in robotics with a focus on mechanism design, workcell automation, and iterative prototyping.We are seeking hands-on, Hardware Development Manager to own the initial deployment of a new robotic workcell into the fulfillment network. You will be deep in design, build, and test cycles. A successful candidate has excellent technical depth, great communication skills, and a drive to achieve results in a team environment.You should enjoy the process of solving real-world problems that, quite frankly, haven’t been solved at scale anywhere before. Along the way, we guarantee you’ll get opportunities to be a fearless disruptor, prolific innovator, and a reputed problem solver—someone who truly enables AI and robotics to significantly impact the lives of millions of consumers.Key job responsibilitiesAs a manager, you will be responsible for delivering and maintaining critical robotic capabilities in the fulfillment network.- You will prioritize being a great people manager: motivating, rewarding, and coaching your diverse team is the most important part of this role. You will recruit and retain top talent and excel in day-to-day people and performance management tasks.- You will keep your technical skills current to contribute to architecture and design discussions.- You will regularly take part in deep-dive troubleshooting exercises and drive technical post-mortem discussions to identify the root cause of complex issues.- You will set a vision for your team and create product roadmaps. Help your team sort out technical and product requirements and priorities. You will use project management skills to deliver product roadmap items and other cross-team projects.- You will work with Supply Chain and Quality organizations, as well as vendors, to ensure smooth production and deliver automation solutions at scale.A day in the lifeAmazon offers a full range of benefits for you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include: 1. Medical, Dental, and Vision Coverage 2. Maternity and Parental Leave Options 3. Paid Time Off (PTO) 4. 401(k) Plan If you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!BASIC QUALIFICATIONS- 7+ years of experience working directly with robotic hardware systems- Experience partnering with product OR program management teams- 3+ years of people management experience, managing engineers- 3+ years of experience architecting and designing (architecture, design patterns, reliability and scaling) of new and current systems ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!Key job responsibilitiesIn this role, you will be responsible for the development and integration of advanced phased array system into products, including: - Work with a cross-functional team, define antenna requirements - Define antenna concepts and requirements during product definition - Develop tools for antenna performance analysis in larger systems - Build and test active phased array prototypes and front-end circuits Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeAs a Senior Antenna Engineer, you will engage with an experienced cross-disciplinary team to conceive and design innovative phased array antennas. You will work closely with Project Kuiper’s various sub-teams and engage third party suppliers in order to drive key aspects of product definition, design, optimization, implementation and test.BASIC QUALIFICATIONS- BS degree in EE with some RF and antenna coursework or research, or equivalent experience- 7+ years of experience of research and/or development in antenna design- 3+ years of experience in programming in Matlab, Python or C++- Experience with one of the mainstream antenna simulation tools (CST, HFSS,…) ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!We're hiring a Sr. Modem Engineer within a high performance ASIC design team. This team is using industry leading methodologies to develop proprietary IP’s. The Role:Be part of Project Kuiper’s sub-team responsible for defining and implementing the digital chip SOCs for communications via Low Earth Orbit satellites and Amazon gateways. This is a unique opportunity to define a groundbreaking wireless solution with few legacy constraints. The team works with customer requirements and wireless system teams to define modems, high-speed interfaces, embedded processors, and DSP solutions in latest CMOS generation technologies.In this role you will: · Implement wireless system architecture in silicon from system specification to chip specification to RTL to optimizing timing / power to chip level validation.· Develop solutions optimizing customer experience (throughput, latency, and availability) while meeting power and cost constraints. · Drive high quality designs for first-time right silicon solutions, and meeting the power objectives· Create standalone verification test bench to verify the correctness of your block. · Work with the verification team and participate in System level verification using test benches constructed using UVM, System C and DPI-C. · Ensure that the block meets DFT, timing and power targets by working closely with the implementation team.· Learn about requirements and solutions for systems operating in space · Drive trade-off analysis to benefit customer experience and optimization of resources (costs, power, spectrum). Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities- Engage with architects and system engineers to drive hardware micro-architecture. - Able to interpret reference models in MATLAB. - Involve in control plane logic design and interfaces to bus fabrics. - Explore and propose innovative ideas and work towards optimization of the modem. BASIC QUALIFICATIONS. Bachelor's degree in Electrical / Communications Engineering or related field, or equivalent experience.· 7+ years of experience in digital logic design, preferably in DSP or communication systems.· Experience in designing and implementing Digital Signal Processing (DSP) algorithms and systems in RTL. · Ability to convert DSP algorithms into RTL code and optimize for performance, power, and area. ...

Ring is a leader in developing security products, such as Doorbells, Spotlights, Cameras and Access Control Products. Our Product Integrity team aims to develop reliable and robust products that delight our customers. Ring is looking for an experienced Hardware Safety and Reliability Engineer to ensure we deliver products that performs per product specifications through time. You will work closely with our cross-functional product development teams to develop and execute reliability and safety test plans. In this role, you will be responsible for the safety and reliability engineering of our products. You will be developing new safety and reliability specifications and build new and reliable technologies that meets the product specifications through the committed life expectancy. You will be the stakeholder for the long term integrity of the products on which you work. You should have a good understanding of risk assessment frameworks, common consumer product and electronic product failure mechanisms, expected use cases in the field, and solid scientific / engineering fundamental to influence design for reliability, quality and safety.Key job responsibilities• Be a technical leader able to utilize deep knowledge and experience to support junior engineers and design teams on safety and reliability issues and failures• Develop and manage Product Integrity Design for Reliability and Safety process• Define test specifications, methodology and test coverage to assure product cross-discipline safety and reliability • Translate product business requirements into safety and reliability qualification plans • Lead product risk assessments with cross-functional teams and collaborate with design teams to mitigate them • Direct reliability and safety testing at external and internal labs.• Establish reliability prediction of failure mechanisms on products under development and products in the field • Approve electrical, mechanical and energy source designs for all NPI programs across the organizationA day in the lifeYou will engage with experienced cross-functional teams and outside partners to drive key aspects of product definition, execution and tests. You must be responsive, flexible and able to succeed within an open collaborative peer environment. As a Sr. Safety and Reliability Engineer, you will be a positive influence to the cross-functional team in launching new disruptive products that are safe, high quality, durable and reliable.About the teamYou will be part of the team that will make Product Integrity the differentiator for Ring's success in the market place. You will be instrumental in ensuring that we design-in quality and reliability in our new product launches, driving our customers to give us the highest rating in customer delight.BASIC QUALIFICATIONS- Master's degree or foreign equivalent in Engineering, Material Science, Physics, or a related field and five years of experience in a related occupation.- Experienced communication skills in writing and presenting- Experience with process and plan development, hardware design, hardware reliability testing, hardware compliance and quality assessment- Experience in data analytics, statistical analysis- Able to generate and execute Design of Experiments and analyze results for recommendations to design team- Experience in data analytics, statistical analysis- Able to generate and execute Design of Experiments and analyze results for recommendations to design team ...

Amazon Lab126 is an inventive research and development company that designs and engineers high-profile consumer electronics. Lab126 began in 2004 as a subsidiary of Amazon.com, Inc., originally creating the best-selling Kindle family of products. Since then, we have produced groundbreaking devices like Fire tablets, Fire TV and Amazon Echo. What will you help us create? The Role: As a Senior Product Design Engineer, the candidate should demonstrate a strong working knowledge of mechanical systems; self-motivation, desire to learn from new challenges, and the problem solving and communication skills to work within a highly interactive and experienced team. Candidates must show a hands-on passion for their work, and must be able to communicate their ideas and concepts verbally and visually. Finally, Candidates must demonstrate an ability to integrate feedback and prove their adaptability to quickly changing contexts and work environments. - Designing and building 3D models for testing, proof-of-concept, mock-ups, and functional appearance models. - Finding, interfacing and managing with 3rd party suppliers and integrate their pieces into the whole system design. - Supporting advanced R&D initiatives & prototyping efforts with team members of other disciplines. - Participate in the cross-discipline design process for system design, combining your skills with HW and SW team members to arrive at integrated effective system designs. - Work well with support resources (technicians) to efficiently realize appropriate design portions. - Identifying emerging technologies to help define development opportunities. - Researching advanced materials and manufacturing processes. - Anticipating and correcting issues that may impact mass-production (DFx). - Supporting positive team interactions to accomplish program objectives. - Contributing to schedule & milestone commitments. - Providing cross-functional program integration support.BASIC QUALIFICATIONS- Bachelor’s Degree in Mechanical Engineering or related field- 5+ years in consumer/handheld product development in high volume manufacturing- 3D CAD skills, Tolerance Analysis- Experience with rapid prototyping processes (3D printing, CNC-machining, laser cutting)- Experience with mechanism design and prototyping; precision mechanical assembly ...

* Note: This job is located in Hudson, MA We are looking for a Senior Camera Systems Engineer to develop optical solutions that require significant innovation for our Amazon Dash Cart team, located in Hudson, MA. Amazon Dash Cart allows shoppers to checkout without lines — you just place the items in the cart and the cart will take care of the rest. When you’re done shopping, you leave the store through a designated dash lane. We charge the payment method in your Amazon account as you walk through the dash lane and send you a receipt. Designed and custom-built by Amazonians, our Dash Cart uses a variety of technologies including computer vision, sensor fusion, and advanced machine learning. Check it out at https://www.amazon.com/b?ie=UTF8&node=21289116011. Key job responsibilitiesAs a Senior Optical Camera Systems Engineer, you will engage with an experienced cross-disciplinary staff to conceive and design features for the Amazon Dash Cart. You will work closely with an internal interdisciplinary team, and outside partners to drive key aspects of product definition, execution, and test. You must be responsive, flexible, and able to succeed within an open collaborative peer environment. Key job responsibilitiesIn this role, you will:• Work with a component engineering team and product engineering team to provide rapid prototyping and characterization of optics or imaging systems• Provide support for modelling and design for prototyping and manufacturing of lightguides and lenses.• Use software tools (LightTools, Zemax etc.) to model system optics characteristics• Work with cross-functional team to draft component specification, design reviews, work with vendors to manufacture parts and validate results by specifying test parameters and methodologies• Communicate and manage overseas component manufacturing vendorsAbout the teamDiverse ExperiencesAmazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why flexible work hours and arrangements are part of our culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Inclusive Team CultureHere at Amazon, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship and Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures- Bachelor's Degree in Electrical Engineering or a related field- Experience developing products from concept to mass production- More than 5 years experience designing and testing RF electronics ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like seeing how your work impacts the bigger picture? Answer yes to these and you’ll fit right in here at Amazon Robotics (AR). We passionately work to apply new advances in robotics and automation to solve real-world challenges to transform the Amazon customer experience. We are Amazon Robotics and we will give you the tools and assistance you need to invent with us in ways that are rewarding, fulfilling and fun. We are seeking exceptional candidates who possess a blend of technical and customer-facing skills to successfully assist existing robotic technologies in the network. This job will require a unique combination of flexibility, troubleshooting, creativity, leadership skills and drive. As part of this highly visible team, candidates have the opportunity to work cross-functionally with multiple engineering teams within (AR) to raise the bar on quality and the customer experience.The Field Hardware Support Engineering team is the primary link between AR and Reliability and Maintenance Engineers (RME) coaching the site on maintenance best practices, robotics systems and tools. You will work directly with RME leaders and technicians at Amazon Fulfillment and Transportation Centers to meet or exceed the as designed performance of their robotic technology. You will identify maintenance pain-points, translate those into opportunities enabling product and/or process changes to improve system performance and customer sentiment. The successful candidate will work backwards from customer objectives and influence a broad range of maintenance, engineering, product, and solution stakeholders from Global Robotics and Central RME to ensure North America maintenance organizations become self-sufficient with Amazon Robotics’ technologies.Key job responsibilitiesFront line resolution of technical inquiries and escalations from RME; the topics of these inquiries and escalations may include but are not limited to: deep diving offline robotic hardware, driving root cause corrective action, spares and tool identification• Provide On-Site escalation assistance to reliability and maintenance teams (deep dive HW functionality gaps, capture and address VOC, remove roadblocks, escalate to partner teams as required)• Work with reach back support teams on resolution of complex technical inquiries and escalations• Engage partner teams to improve process bottlenecks and influence managers and directors• Serve as Subject Matter Expert for two to three Amazon Robotic assets• Identify and address trending hardware performance issues and improvement opportunities, and implementing solutions in the AR network• Escalate building risks to program management and hardware support engineering leadership, define and deliver risk resolution plans• Capture “voice of the customer” and leverage field experience to insist on the highest standards in product design and development priorities• Execute continuous improvement projects using automation• Work independently and with ambiguity in a complex, fast-paced, and high-throughput environment where multi-tasking is requiredBASIC QUALIFICATIONS- Bachelor’s degree in Engineering (Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Process Engineering) or relevant STEM degree- - 4+ years experience in a manufacturing, warehouse, or equivalent environment with experience resolving technical issues with a cross functional team- - Experience managing multiple high-priority tasks simultaneously- - Excellent business communication skills for technical and non-technical topics- - Troubleshooting expertise with proven problem-solving and analytical skills- - Ability and willingness to travel up to 75% and a minimum of 50% ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We’re working on the future. If you are seeking an iterative, fast-paced environment where you can drive innovation, apply state-of-the-art technologies to solve challenging real world challenges, and provide visible benefit to end-users, this is your opportunity. Come work at Amazon!The Role:We're looking for a Mechanical Designer who combines superb 3D CAD capabilities with a demonstrated ability to get the right work done quickly and effectively. This person must have experience working in a multidisciplinary environment and producing top notch CAD designs. This person must be comfortable working with large databases with complex constraints.Key job responsibilities - Creation, iteration and management of CAD designs for large system databases - Manage the creation, checking, issuing and revisions of drawings for parts / assemblies - Manage CAD BOM through product lifecycle management system - Work with a team of engineers across multiple disciplines (mechanical, thermal, electrical, structural, manufacturing, metrology, tooling, assembly, test) in the ideation and creation of system concepts - Engage with suppliers and vendors as needed for CAD definition of sourced components/systems - Work with procurement and sourcing in identification and review of manufacturing sources Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- Bachelor's degree in Mechanical Engineering, Electrical Engineering, related field OR equivalent experience - 3+ years CAD experience in complex mechanical / electro-mechanical assemblies/ machines/ structures/ systems using NX - 1+ years developing, manipulating, iterating and optimizing mechanical designs with complex interactions / constraints - 1+ years of interfacing with a range of engineering disciplines, and understanding the scope of those inputs and requirements ...

AWS Utility Computing (UC) provides product innovations — from foundational services such as Amazon’s Simple Storage Service (S3) and Amazon Elastic Compute Cloud (EC2), to consistently released new product innovations that continue to set AWS’s services and features apart in the industry. As a member of the UC organization, you’ll support the development and management of Compute, Database, Storage, Internet of Things (Iot), Platform, and Productivity Apps services in AWS, including support for customers who require specialized security solutions for customers who require specialized security solutions for their cloud services.Annapurna Labs (our organization within AWS UC) designs silicon and software that accelerates innovation. Customers choose us to create cloud solutions that solve challenges that were unimaginable a short time ago—even yesterday. Our custom chips, accelerators, and software stacks enable us to take on technical challenges that have never been seen before, and deliver results that help our customers change the world.We are seeking a Hardware Design Engineer with role in the definition, design and validation of AWS next generation ML Chips, Cards and server integration. As a senior member of our hardware team, you will have the outstanding and meaningful opportunity to participate in the design and execution of all PCIe and Serdes topics, with the goal of creating and customized platforms that fit within AWS datacenter’s world leading technology.As a member of the Machine Learning Acceleration team you’ll be responsible for the design and optimization of hardware in our data centers. You’ll provide leadership in the application of new technologies to large scale server deployments in a continuous effort to deliver a world-class customer experience. This is a fast-paced, intellectually challenging position, and you’ll work with thought leaders in multiple technology areas. You’ll have high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your products performance, quality and cost. We’re changing an industry, and we want individuals who are ready for this challenge and want to reach beyond what is possible today.About the teamOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge-sharing and mentorship. Our senior members enjoy one-on-one mentoring and thorough, but kind, code reviews. We care about your career growth and strive to assign projects that help our team members develop your engineering expertise so you feel empowered to take on more complex tasks in the future.Diverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.About AWSAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- Deep knowledge with PCIe interface Gen4 or above, both Electrical and Functional at the chip level and at the PCB level. - Deep understanding of Transmission line theory and Electromagnetics and its application in SerDes, Single-ended signal and parallel bus interfaces. * Work with ODMs, IP Silicon vendors, component suppliers and internal design teams on cross-boundary triaging, debugging, and resolving issues.- Hands-on lab equipment skills (VNA, Realtime scope, Sampling scope and its accessories) for electrical validation and characterization. - Scripting skills to automate tests, logs parsing and data collection. - Strong technical communication skills (verbal and written) to interface with cross-functional technical leads within and/or outside of the organization. ...

In Annapurna Labs we are at the forefront of hardware/software co-design not just in Amazon Web Services (AWS) but across the industry. The Machine Learning Fleet Operations Team is looking for candidates interested in diving deep into our "fleet" of Machine Learning servers deployed around the world.Do you like solving mysteries? Great! Figuring out what that light switch with no obvious function actually does? Me too! Are you wearing a smartwatch to monitor your sleep and activity over time to optimize your routines? You'll fit right in. Does the word exabyte excite you? Let's get to work.We are seeking an experienced TPM to help drive solutions in the highly technical machine learning server hardware space. Our team has end to end ownership of some of the most advanced server hardware in the world. We drive technical debug efforts and write truly massive scale autonomous software to monitor, optimize, and remediate machine learning hardware. Come join us!Key job responsibilitiesMember of a team responsible for system remediation, operational excellence, and customer experience on bleeding edge ML productsUtilize data to root cause hardware failures and identify live trends on the most complex systems in AWSImplement and improve system level testing across the product lifecycleInterface, communicate, and collaborate across organizations within AWSDive deep on issues at the intersection of hardware and softwareA day in the lifeThe MLA Fleet Operations team was formed to maintain an exceptionally high quality bar for our fleet of advanced machine learning server products. We perfect the customer experience by developing scalable software for rapid incident response times and data visualization as well as diving deep into hardware issues as they arise.About the teamOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge-sharing and mentorship. Our senior members enjoy one-on-one mentoring and thorough, but kind, code reviews. We care about your career growth and strive to assign projects that help our team members develop your engineering expertise so you feel empowered to take on more complex tasks in the future.BASIC QUALIFICATIONS- 5+ years of technical product or program management experience- 7+ years of working directly with engineering teams experience- 3+ years of software development experience- 5+ years of technical program management working directly with software engineering teams experience- Experience managing programs across cross functional teams, building processes and coordinating release schedules ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are looking for a technical leader, who has a demonstrated track record of building strong engineering teams and delivering complex solutions, to lead the Test Engineering team for the Satellite Avionics Bus. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Lead the vision and execution for test system development.• Work with key stakeholders across hardware and software development teams to define test strategy and requirements.• Define electrical component and subsystem test plans as needed to ensure robust electrical designs for space applications.• Lead the planning and execution of design verification test, qualification, reliability, and production test campaigns for avionics subsystems.• Hire, lead, and guide the various aspects of the test engineering team through test system architecture, equipment selection, PCB design, harness design, test system build and integration, and test system commissioning and delivery to customers.• Develop and manage processes, including test system design reviews, test plan reviews, test readiness reviews, and test results reviews.• Partner with cross-functional teams including electrical engineering, RF engineering, mechanical engineering, software, reliability, manufacturing, program management, etc.A day in the lifeAs the Test Engineering Manager, you and your team will develop and deliver test systems for avionics subsystems for both development and production test. You will be responsible for development test campaigns, which include board level electrical design verification test, LRU qualification test, and reliability test. You will lead the definition and deployment of your test systems to production test, which include external and internal manufacturing test.About the teamOur team designs and delivers the test systems that enable qualifying and acceptance testing the hardware subsystems for the flight computer, power delivery, and RF systems on the satellite avionics bus. You and your team will lead design verification, qualification, and reliability testing of our avionics subsystems, and deliver test systems to development and production test workstreams.BASIC QUALIFICATIONS• BS degree in Electrical Engineering, Computer Engineering or equivalent.• 3+ years of managing an engineering team.• 7+ years designing and/or testing with SoCs, DRAMs, FPGAs, multi-gigabit interfaces, power converters, sensors, operational amplifiers, ADCs/DACs, high speed printed circuit boards, and harnessing.• Experience developing requirements, test plans, and test procedures for design verification, qualification, and/or manufacturing test.• Experience designing and delivering test systems to support design verification, qualification, reliability, and/or manufacturing testing. ...

Join the team which delivers highly differentiated silicon into Blink and Ring battery powered devices. Our validation team works on state-of-the art SoCs in a vertically integrated team environment to deliver products our customers love. The team works backwards from customer requirements to build super-low power, energy efficient designs that include the latest in AI, video processing, low power communications and CMOS fabrication technology.Because we are vertically integrated we directly get to see products built and ship based on our silicon.We work directly with product teams to increase the velocity of features and time to ship products.Key job responsibilities- Write comprehensive Post-silicon validation test plans- Develop automated software test applications for effective ASIC stress testing- Collaborate with firmware teams to evaluate system performance- Support Post-silicon bring-up- Execute test plans for the ASICs- Debug and characterize standard interfaces (SPI, SDIO, MIPI, I2C, UART)- Investigate silicon yield issues- Write and support firmware examples to downstream customers- Work with product teams to debug system issues- Test digital logic as well as mixed signal IPs- Automate and enhance process and flows around testing- Work in the lab, using test equipment to validate ASICs- Work in an Emulation environment as part of the pre-silicon effortBASIC QUALIFICATIONS- 5+ years experience in Post-silicon validation, preferably in mixed-signal IPs, SoC Interfaces- 3+ years of experience in C/C++ and scripting (Python preferred) ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilitiesAs the Senior Manager of HW Wireless HW Development and Test, you will help to build and supervise a team of experts in antenna prototyping and test for both R&D and production phases.In this role, you will be overseeing the following:- Develop over the air test infrastructure including anechoic chambers and robotic nearfield scanners- Develop prototyping capability including equipment, SW tools, rework stations, inspection cameras- Build and test prototypes in support of R&D efforts- Conduct test and verification on HW at different stages of the product cycle, generate test reports and provide analysis on the results in support of different development and production activities- Develop post processing algorithms and tools in support of antenna, RF and electrical test- Develop the technology solutions, define and execute products and test infrastructure for upcoming generations of Kuiper's wireless technology- Develop planning and resource management systems in support of HW test at scaleThis is a highly visible role with several internal customers, a sizeable body of full time and/or contingent staff, a very large facility that hosts highly advanced test systems. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- Partner with recruiting team, interview candidates, onboard new hires- Work with their team to develop infrastructure for testing- Direct/lead internal team on the development of the infrastructure for satellite production About the teamThe team under this Sr Manager role will be a mix of Antenna designers, SW developers architects and HW developers.BASIC QUALIFICATIONS· MS degree in electrical engineering, with coursework and/or research work on antennas or RF/Microwave, or equivalent experience · 10+ years of experience in development and/or research experience in antenna, RF systems, or DSP development · 5+ years of experience in technical and/or team leadership · 5+ years of experience in antenna/RF testing · 2+ years of leading software development in support of test or calibration ...

Have you ever wanted to be part of a team who is building industry changing technology? Amazon’s Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband network connectivity to unserved and underserved communities around the world.Key job responsibilitiesAs a Sr. PCBA Manufacturing Test Engineer, you will be responsible for deployment, qualification, continuous improvement of test systems, processes, and procedures at CM (Contract Manufacturing) sites for Satellite PCBAs. You will be a key member of PCBA Manufacturing team and will be the main interface between Kuiper’s internal test development teams and our manufacturing partners. You will ensure successful test deployment by documenting procedures, training CM personnel, and providing ongoing support. You will have excellent debugging skill with the ability to dive deep and determine the root-cause of a test failure.Key job responsibilities• Develop test strategies, implement and optimize test setup/processes at Contract Manufacturing sites including identification, specification, design and qualification of test fixtures, test equipment, and maintenance programs.• Work with the R&D and Test Development teams to continuously improve test systems, software, fixtures, and procedures to improve test effectiveness and throughput.• Analyze data to identify failure trends and provide recommendations PCBA, process, and test system improvement.• Develop procedures and documentation for use by test operators.• Train operators on test processes and support recurring certification programs.• Perform PCBA debug and root-cause failure analysis at Contract Manufacturing sites. Create runbooks and provide training for technicians to perform PCBA debug.• Provide feedback to the Test Development team on test coverage, fault isolation capability, PCBA failure trends, and DFT (Design for Test) recommendations.• Run small teams to accomplish short-term objectives and implement strategic initiatives.Export Control Requirements: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeCome solve the difficult and rewarding engineering challenges in developing a highly reliable, power efficient, high performance, low-cost satellite system. As a Sr. PCBA Manufacturing Test Engineer, you have the ability to dive deep on the details to identify, understand and solve difficult technical problems and also utilize a system level approach to prioritize issues for the whole program. You thrive in a hands-on environment and will spend time in the office, on the factory floor, at manufacturing partners, and in the lab to execute the Project Kuiper mission.About the teamThe PCBA Manufacturing Test Engineering team delivers and deploys test systems for all Kuiper satellite PCBAs. This is an inclusive, inter-disciplinary team that is committed to performance, quality, & reliability. Your breadth of exposure will be immense as you collaborate with other core groups, helping to guide the test systems from design to production and operation.Here at Amazon, we embrace our differences. We are committed to furthering our culture of inclusion. Amazon has ten employee-led affinity groups, reaching 40,000 employees in over 190 chapters globally. We have innovative benefit offerings, and host annual and ongoing learning experiences. Amazon’s culture of inclusion is reinforced within our 16 Leadership Principles, which remind team members to seek diverse perspectives, learn and be curious, and earn trust.BASIC QUALIFICATIONS- Bachelor’s Degree in Electrical Engineering Electrical Engineering Technology or related field- 8+ years of experience deploying, using, and training others on the use of complex test systems including RF functional tests, high power electrical tests, ICT/bed-of-nails fixtures, and Flying Probe test.- 8+ years of experience integrating software and hardware systems.- 8+ years of experience in the use of standard electronic lab test equipment (i.e., oscilloscopes, multimeters, etc.) to debug complex PCBAs.- Ability to write detailed test station operating procedures- Ability to create deployment/capacity plans for multiple testers at multiple CMs- Experience with Linux/scripting ...

Amazon Web Services provides a highly reliable, scalable, low-cost infrastructure platform in the cloud that powers hundreds of thousands of businesses in 190 countries around the world. We have data center locations in the U.S., Europe, Singapore, and Japan, and customers across all industries.We are seeking experienced Senior Substrate CAD layout Engineer for the next generation of our ML ASIC. This is a fast-paced, intellectually challenging position, and you’ll work with thought leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your products performance, quality and cost.We’re changing an industry, and we want individuals who are ready for this challenge and want to reach beyond what is possible today.As a Substrate/PCB layout engineer you will participate in the definition and implementation of substrate and PCB boards. This individual will contribute in all phases of the product’s design, including placement, routing, constraint table management, and drafting. You must bring a combination of Substrate/PCB design, assembly, test and fabrication knowledge, cross team functional interdependence, and demonstrable design process experience to the position. In this role you will: Work with the Electrical Engineering hardware team to provide PCB board design services Work with fabrication vendors to supply data and seek fabrication design requirements Work with assembly vendors to supply data and seek assembly design requirements Deliver best in class Substrate/PCB design to high-volume manufacturing Assist as necessary in schematic and PCB footprint development Work with the company PLM system to write and release ECO’sBASIC QUALIFICATIONS B.S. in Electrical Engineering or related field 7+ years of experience of PCB layout design 7+ years of current experience using Cadence Allegro PCB Design/CIS 7+ years of current experience using Cadence SIP and APD 7+ years of experience with high speed and impedance circuits 7+ years of experience with compact, dual side assembly design Experience with HDI design Experience with BGA pitch of equal or less than 0.5mm ...

Amazon Web Services (AWS) Hardware Engineering team creates compute and storage server designs for Amazon’s innovative web services. The storage platform team develops and operates all the platforms for our major storage products (S3, EBS & EC2). Our designs are industry-leading in performance, frugality and operational excellence, and are critical to the success of the AWS business and the more than one million customers who use AWS today. Our success depends on our highly respected storage infrastructure; we’re handling massive scale and rapid integration of emergent technologies.We are seeking experienced Hardware Design Engineers to build the next generation of our Nitro SSD hardware platform that is deployed through various storage platforms across their entire lifespan from inception to retirement. As noted in re:Invent 2021, Nitro SSD is the fastest growing vertically integrated NAND flash based storage solution atAWS. What you will do: As a member of the Storage Hardware Engineering team you will be responsible for the design of our storage platforms and AWS specific hardware components. You will interact with engineers across the company, and work with an interdisciplinary team to execute product designs from concept to production including design, development, validation, and the successful implementation of your work at large scale. You’ll provide leadership in the application of new technologies to large scale server deployments in a continuous effort to deliver a world-class customer experience. This is a fast-paced, intellectually challenging position, and you’ll work with thought leaders in multiple technology areas. You’ll have high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your products performance, quality and cost. We’re changing an industry, and we want individuals who are ready for this challenge and want to reach beyond what is possible today.Why it matters: Public cloud IT services represent the majority of growth in the overall IT services market and will continue to do so for several years to come. The scale of AWS, combined with an understanding of how our hardware is used, creates a unique opportunity for hardware customizations that will directly benefit our customers. Why you will love it: You will work directly with engineers across the company to enable the rapid development of next-generation storage solutions.You will have a direct impact on our bottom line and the ability to deliver improvements for our customers. You will be part of a growing, fast paced, and fun team. You will have ownership for the implementation of your work.Key job responsibilitiesAs the member of Nitro SSD hardware team, you will participate in the full hardware design and product development lifecycle for Nitro SSD, including high-speed mixed signal board design, component selection, validation, qualification, operations and sustain. The team drives platform integration and continuity of supply of the Nitro SSD product and associated system integration elements. As the Hardware Dev Engineer II, you will closely work with Platform Storage teams, Annapurna teams, Commodity and Supply-chain teams and our firmware and storage software teams to deliver bar-raising vertically integrated storage solutions for our customers. You will work with CM's and ODM's to drive the quality, availability and yields for the platform.A day in the lifeDrive product design, integration, qualification, launch and sustain of the Nitro SSD hardware and associated server integration elements. Work closely with Platform and Annapurna teams to define long-term product roadmap and deliver differentiated value-adds for our customers. Work with Supply chain, Manufacturing Quality, CM's and ODM's to ensure continuity of supply and cost optimization while raising the quality bar for the product.About the teamNitro SSD teams are distributed across Seattle, Cupertino, Denver and Austin. The team builds and operates the Nitro SSD storage solution that is used by EC2 and EBS to deliver high performance, low-latency scalable storage for AWS customers.BASIC QUALIFICATIONS- Bachelor's degree in electrical engineering or equivalent- 2+ years of experience in hardware design and development of high volume storage solutions and SSD. ...