Hardware Development

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Key job responsibilitiesAs the Senior Manager of HW Wireless HW Development and Test, you will help to build and supervise a team of experts in antenna prototyping and test for both R&D and production phases.In this role, you will be overseeing the following:- Develop over the air test infrastructure including anechoic chambers and robotic nearfield scanners- Develop prototyping capability including equipment, SW tools, rework stations, inspection cameras- Build and test prototypes in support of R&D efforts- Conduct test and verification on HW at different stages of the product cycle, generate test reports and provide analysis on the results in support of different development and production activities- Develop post processing algorithms and tools in support of antenna, RF and electrical test- Develop the technology solutions, define and execute products and test infrastructure for upcoming generations of Kuiper's wireless technology- Develop planning and resource management systems in support of HW test at scaleThis is a highly visible role with several internal customers, a sizeable body of full time and/or contingent staff, a very large facility that hosts highly advanced test systems. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- Partner with recruiting team, interview candidates, onboard new hires- Work with their team to develop infrastructure for testing- Direct/lead internal team on the development of the infrastructure for satellite production About the teamThe team under this Sr Manager role will be a mix of Antenna designers, SW developers architects and HW developers.BASIC QUALIFICATIONS· MS degree in electrical engineering, with coursework and/or research work on antennas or RF/Microwave, or equivalent experience · 10+ years of experience in development and/or research experience in antenna, RF systems, or DSP development · 5+ years of experience in technical and/or team leadership · 5+ years of experience in antenna/RF testing · 2+ years of leading software development in support of test or calibration ...

External job descriptionAs a Sr. Applied Scientist, you will be responsible for assessing and optimizing the performance and reliability of our new and emerging category of devices – Kuiper Customer Terminal. Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to un-served and under-served communities around the world.In this role, you will use expertise in physical sciences, theoretical, numerical or empirical techniques to create scalable models representing response of physical systems or devices, including:- Applying domain scientific expertise towards developing innovative analysis and tests to study viability of new materials, designs or processes- Working closely with engineering teams to drive validation, optimization and implementation of hardware design or software algorithmic solutions to improve product and customer risks- Establishing scalable, efficient, automated processes to handle large scale design and data analysis- Conducting research into use conditions, materials and analysis techniques- Tracking general business activity including device health in field and providing clear, compelling reports to management on a regular basis- Developing, implementing guidelines to continually optimize design processes- Using simulation tools like LS-DYNA, and Abaqus for analysis and optimization of product design- Using of programming languages like Python and Matlab for analytical/statistical analyses and automation- Demonstrating strong understanding across multiple physical science domains, e.g. structural, thermal, fluid dynamics, and materials- Developing, analyzing and testing structural solutions from concept design, feature development, product architecture, through system validation- Supporting product development and optimization through application of analysis and testing of complex electronic assemblies using advanced simulation and experimentation tools and techniquesBASIC QUALIFICATIONS- PhD, or Master's degree and 5+ years of industry or academic research experience- Experience programming in Java, C++, Python or related language- Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum." ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Project Kuiper is seeking a Test Manager to join the Integrated Test Value Stream to support production. This role will work closely with the Integration Test Value Stream Manager to supervise a technician team that performs testing for multiple types of satellite sub-assemblies as well as full-vehicle testing. The individual will have strong leadership skills and be required to work on multiple projects in a fast-paced environment where communication and organization will be critical. This position will also utilize a variety of analytical tools as well as aid in creating a variety of production processes which they will help to draft and maintain. This will require supervisory duties as well as working as an operator in the test lab.Key job responsibilities- Supervise a team of technicians focused on full-rate production.- Work with management to plan and coordinate daily tasks for technicians and activities of all operations with an ability to adapt to changing schedules and other dynamic priorities.- Work cross-functionally with management, facilities, and supply chain to maintain operations and materials for the Integrated Test Value Stream- Ability to provide timely feedback on designs, processes, and custom equipment used in routine prototyping, fabrication, and characterization.- Author, maintain, and train others to all relevant process documentation, including Assembly, Inspection, Testing/In-Process Characterization, and Packaging Procedures.- Review and approve rework to ensure accuracy and enforce traceability.- Comply with all Company Policies including Health, Safety, and Environmental Regulations, Personal Protective Equipment Requirements, and Standard Operating Procedures.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the lifeA Test Manager in this role will play a valuable part in ensuring hardware is ready to be integrated on a satellite and that satellites are ready to be delivered for launch. You will have to be comfortable in a high paced environment and be able to multitask while still being able to produce high quality work. You will be leading a group of technicians expected to test and deliver hardware at a high rate while maintaining quality. You will be working to constantly improve processes that will make impacts on the efficiency of the satellite factory. You will also play a key role in the career growth of technicians on your team.Must have Aerospace / Environmental Test or other highly related industry experience.BASIC QUALIFICATIONS- 3+ years’ experience in Clean Room Manufacturing environment.- 2+ years’ experience of supervisory experience.- 2+ years’ experience in Environmental Test- 3+ Experience manufacturing in high traceability environment ...

Project Kuiper is a initiative within Amazon that aims to revolutionize global connectivity through the development of a state-of-the-art Low Earth Orbit (LEO) interconnected satellite communication constellation. Our mission is to bridge the digital divide by delivering high-speed, low latency, internet services to underserved and unserved communities and remote communities around the world. By leveraging satellite technology, we are working towards a future where everyone has access to reliable and high-quality internet connectivity regardless of their location. The Kuiper Government Solutions (KGS) Engineering organization is a multi-disciplinary technology team established to rapidly address the needs of targeted government and international customers with specific solutions that have the potential to scale. KGS Engineering leads the development and delivery of targeted and scalable solutions for custom space and terrestrial applications. KGS collaborates closely with Project Kuiper to leverage the constellation of advance satellites to provide seamless and efficient communication capabilities to meet the needs of our customers. The KGS Engineering team is seeking highly technical and talented individuals who are passionate about creating unique solutions that result in a positive impact on a global scale.The Lab Engineer will engage with an experienced cross-disciplinary team to design, integrate, and test innovative space-based and terrestrial systems and subsystems. The Lab Engineer will work closely with colleagues throughout Kuiper Government Solutions (KGS) inter-disciplinary teams and collaborate with key partners and suppliers in order to ensure our system exceeds customer expectations. The Lab Engineer must be responsive, flexible, innovative, and able to succeed within a collaborative, fast-paced, and dynamic environment. As a member of the KGS Engineering Integrated Systems Solutions organization, the Lab Engineer will be responsible for the quality, reliability, cost, manufacturability, throughput, and security of KGS product deliverables. The Lab Engineer accomplishes this by effectively managing research & development (R&D) engineering labs, identifying process improvements to improve build and test efficiency, and working closely with multiple engineering teams on early hardware & software development efforts setting the stage for low-rate production manufacturing and factory acceptance test processes. The candidate will have the capability to build and assemble production hardware, develop mechanical tooling, integrate and validate electronic test systems, develop manufacturing and test procedures, and modify automation test software for various products including but not limited to opto-electrical subsystems, opto-mechanical, electro-mechanical subsystems, and RF systems. This candidate will also be responsible for the maintenance and operation of environmental test systems including but not limited to thermal vacuum/thermal cycle test chambers, dynamics/vibration test systems, and accelerate life test systems. The successful candidate thrives in a fast paced, start-up like environment and are able to apply their technical expertise, leadership skills and commitment to quality to positively impact team metrics and organization goals. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution.The successful candidate will have demonstrated experience working on large-scale programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). Key job responsibilities• Document and assemble opto-mechanical, opto-electrical, electro-mechanical satellite assemblies, sub-assemblies, and integration of subsystems and final space vehicle including fabrication and/or materials processing into complex manufactured products• Manage R&D development lab spaces, order/stock consumables, track assets.• Responsible for lab equipment requirements, preventative maintenance, calibration, and improvements including but not limited to test equipment, tooling, data acquisition systems, environmental chambers, etc.• Responsible for lab operations, maintenance, and safety. Including lab inventory maintenance• Experience working with and driving safety for FOD, ESD sensitive hardware and cleanroom requirements• Responsible for executing and improving on assembly, build, integration, and test procedures for assembly, subsystem, and system level products. • Receive shipments and coordinate receiving and delivery logistics including but not limited to using forklifts, pallet jacks, and other critical lift operations utilizing gantry and/or bridge cranes• Responsible for the identification, development, and documentation of critical process mechanisms to improve lab safety operations, manufacturing efficiencies, and build quality. This position requires that the candidate selected be a U.S. Citizen in order to comply with U.S. government-imposed requirements related to the nature of the work and/or where it will be performed.About the teamKuiper Government Solutions (KGS) Engineering is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. These solutions are tailored to meet the needs of government and international customers for both space-based and terrestrial applications. The Integrated Engineering Solutions organization under KGS Engineering plays a vital role in the entire life cycle of the development of an engineering solution, including architecture development, requirements and interface definition through assembly, integration, and test (AI&T). verification, and post-delivery and operational support. BASIC QUALIFICATIONS• Associate’s degree or equivalent in Electronics, Mechanics, Product Design, Manufacturing Technologies, Computer Science, or other STEM discipline• 3+ years relevant high traceability manufacturing experience (Aerospace / Medical, etc.)• 3+ years of hands-on work experience electro-mechanical, opto-electrical, opto-mechanical assembly, final integration and harness integration experience• 3+ years of experience in a fast-paced production environment with Flight Hardware• 3+ years of hand on experience with precision torque, measurement and inspection devices (i.e., automated and manual torque wrenches, calipers, micrometers, profilometers, optical inspection devices, multi-meters, torque wrenches)• 3+ years of experience in board level design verification and test for aerospace, automotive, or consumer electronics products; OR 3+ years of experience building complex test systems• 3+ years of experience developing electronics assembly, manufacturing, and test procedures for electrical product design verification and validation• 3+ years of experience in the use of standard electronic lab test equipment (i.e. network analyzers, oscilloscopes, spectrum analyzers, function generators, multimeters, etc.)• 3+ years of operating heaving machinery, leading critical lift campaigns, operating thermal/thermal vaccum chambers, and operating vibration/dynamic motion systems.• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position• Able to lift-up to 25-lbs. unassisted ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart team of doers that work passionately to apply the latest advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t even image yet. We invent every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling and fun. Job Overview Amazon Robotics is seeking a motivated and hands on Test Engineering Mechanical Manager to lead a team of hardware test engineers. The hardware test team is a multi-disciplinary environment of mechanical/electrical/software/quality engineers and technicians dedicated to advancing the knowledge of robotics and how millions of customer orders are fulfilled every day. In this role you will lead a team in testing new and existing robotic technologies, working alongside the development organizations from concept to product delivery, informing the design teams along the way and verifying that our products meet and exceed expectations. You will need a background or familiarity with mechatronics, robotics, fixture design and development, and test strategy. Key job responsibilities- Owning the delivery of test strategies and results to support development and deployment of new robotic and automated solutions.- Scoping, managing, and delivering multiple technical projects in parallel from concept to production- Recruiting and developing great people; continually raising the bar- Evaluating and identifying improvements to the overall test processes- Maintaining high level of communications with cross-functional team, and partners- Interfacing with engineering managers, product management, and/or program management to create test strategies to inform development and verify requirements. A day in the lifeYou will work daily with our development team throughout the development cycle providing data to inform design decisions and ultimately verifying that all product requirements are met. This happens at your computer writing test plans, in the labs gathering data, designing and building new fixtures, helping to debug early prototypes, developing new methodologies, and looking into the future. This role needs the candidate to be adaptable as they work in an ever evolving environment. Amazon offers a full range of benefits to support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include:1. Medical, Dental, and Vision Coverage2. Maternity and Parental Leave Options3. Paid Time Off (PTO)4. 401(k) PlanIf you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!BASIC QUALIFICATIONS- BS / MS Mechanical Engineering (or similar field)- 10+ yrs of experience in mechanical engineering- 3+ years of management experience- 3+ years in testing related role- Familiar with industry standard CAD & FEA tools, industry trends, sensors- Demonstrated ability to manage and motivate an engineering team- Ability to manage a process driven testing mentality, driven to the highest standards - Commitment to rigorous testing & validation practices- Experience with the project management of technical projects a plus- Strong organizational and planning skills- Excellent written (white papers) and oral communication skills ...

As a Sr Component Engineer at LAB126, you will be at the heart of the hardware design process. You will have the opportunity to apply your skills as part of a world-class team, working collaboratively with cross-functional groups to help bring some of the best-selling consumer electronics products to market.Key job responsibilities• Review all requests for new components and assure that the parts can satisfy the existing design requirements. • Establish and maintain specifications for custom and off-the-shelf components.• Generate specifications for new custom parts. • Read and understand electrical schematics, mechanical drawings, and component data sheets. • Work within the parameters of PLM to coordinate component approval and EOL/Obsolete status. • Interface with the ECAD team in the maintenance of Libraries and Databases. • Coordinate failure analysis and root cause/corrective actions with internal and vendor teams. Experience in dealing with external labs. • Work with cross-functional teams to source and suggest alternate parts. Teams will include SW Development, Operations Management, Materials Management, and Hardware Design Engineering. • Participate in product design reviews. • Test plan execution and creation. A day in the lifeAs a Sr. Component Engineer, in a HW Development Role, you will support all phases of the hardware development process including support of a component selection strategy that ensures part availability throughout the product development process; detect and prevent component issues that would impact successful product launch. You will juggle priorities without losing sight of the customers, the project schedule and planned launch milestones. Forging collaboration between the engineering, operations, global commodity management groups & external AVLs to ensure that the component choices fit the goals and objectives of the design through production, sustaining, and obsolescence stages. The Sr. Component Engineer will assist in maintaining the databases by creating Engineering change orders, assigning part numbers, and maintaining part descriptions. About the teamAs a Sr Component Engineer at LAB126, you will be part of a world-class team comprising experts in various disciplines, including Component Engineering, Symbol Engineering, Automation Engineering, and PCB Layout. This team operates at an incredibly high standard, pushing the boundaries of what's possible to produce some of the most sought-after, best-selling consumer tech products on the planet. BASIC QUALIFICATIONS- Bachelor's degree in Electrical, Computer, Mechanical, or related field.- 5+ year's experience in a similar role.- Experienced with many types of components such as SoC’s, logic gates, memories, PMIC’s, MOSFET’s, diodes, resistors, inductors, capacitors, crystals, connectors and cable assemblies. Demonstrated competence in the usage of digital oscilloscopes, multi-meters, LCR meters, curve-tracers, and related component test equipment.- Experienced with ROHS/WEEE requirements and current exemptions.- BOM scrubbing with correct MPNs and lifecycles. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.We're looking for an experienced Manufacturing Engineer to lead Battery Pack production development.As the lead Manufacturing Engineer for a Line Replaceable unit at Project Kuiper, you will be directly responsible for the production process development, introduction, improvement, & maintenance of a key module on our spacecraft. You’ll be the leading technical voice for a team of lab engineers, assembly/test technicians working on the product, solving challenging technical problems associated with manufacturing and delivering a battery pack for integration on a spacecraft and ultimately to space.You will serve as a key lynchpin connection design/development, factory operations, quality engineering, program management, and more as you drive the manufacturing processes, we use from initial production introduction to full rate production.You’ll solve complex industrial challenges associated with balancing production velocity, exceptional quality, and cost competitive production concepts while ensuring smooth technical execution of current production operations. You’ll be a key animating force in the increase in production capacity through vision & execution of capital investment for production scaling & automation.Key job responsibilities- Develop and maintain all manufacturing artifacts (MBOM, Routing, Work Order Template, Work Instructions, etc.).- Become the subject matter expert in the build and test processes of manufacturing a battery pack- Serve as the catalyst to un-block and improve production processes through direct production support with non-conformances, troubleshooting, process improvement activities, and training.- Conceptualize, design, develop, and improve production processes (assembly, integration, test processes).- Serve as primary technical interface to development team for Battery Pack assembly and test, participating as the lead technical voice from the factory in Design Reviews, key technical escalations, and new product development activities.- Own the capacity increase roadmap for production including defining the relevant capital equipment required for rate increase and helping to lead the design, procurement, install, and qualification of new rate enabling equipment.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- 50% - On the shop floor, working with production teams to implement new processes, review & solve key technical blockers in production, performing production development testing, etc.- 40% - Independent development work such as identifying and implementing key production improvement actions, acting on quality escapes by developing and implementing new quality control measures, developing & executing to existing roadmaps for capacity increase, process simplification, etc.- 10% - Meeting settings, collaborating with others on topics such as new design introductions, production process change management, production solution finding reviews, etc.BASIC QUALIFICATIONS- Bachelor's Degree in Engineering (Manufacturing/Mechanical/Aerospace/Industrial/Electrical) or related discipline, or equivalent experience- 2+ year experience with integrating, testing and troubleshooting mechanical and electronic systems- 2+ year experience with Computer Aided Design tools such as Solidworks or NX/Unigraphics- Familiarity with Low-Rate Manufacturing Environments & New Product Introduction- Knowledge of Lean manufacturing practices & principles- Experience with Root Cause Analysis Techniques such as Fishbone, Fault Tree, DMAIC, or related technologies/processes- Technical writing experience, including work instructions, standard operating procedures and/or test plans- Experience working with interdisciplinary teams to execute product design from concept to production- Experience with the project management of technical projects ...

Amazon Web Services (AWS) Hardware Engineering is a leading-edge product development team that creates enterprise compute and storage server designs for our innovative web service and e-commerce technology platforms. Our designs are industry-leading in terms of performance, frugality, and operational excellence, and are critical to the success of the AWS business and the hundreds of thousands of customers who use utility computing today. We are seeking experienced Thermal/Mechanical Engineers to build the next generation of our cloud platforms. Our success depends on our truly innovative server infrastructure; we’re handling massive scale and rapid integration of emergent technologies.What you will do: As a member of the Hardware Engineering Mechanical/Thermal/Robotics (MTR) Engineering team you’ll be responsible for the design of our server platforms. You’ll provide leadership in the application of new cooling and mechanical technologies to large scale server deployments in a continuous effort to deliver a world-class customer experience. This is a fast-paced, challenging position, and you’ll work with thought leaders in multiple technology areas. You’ll have relentlessly high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your products performance, quality and cost. You’ll need to understand when a change in technology enables a completely different way of approaching server design. We’re changing an industry, and we want team members who are ready for this challenge and want to reach beyond what is possible today.Why it matters: AWS Global Cloud Infrastructure is the most secure, extensive, and reliable cloud platform, offering over 200 fully featured services from data centers globally. Whether customers need to deploy application workloads across the globe in a single click, or want to build and deploy specific applications closer to end-users with single-digit millisecond latency, AWS provides the cloud infrastructure where and when its needed. With millions of active customers and tens of thousands of partners globally, AWS has the largest and most dynamic ecosystem. Customers across virtually every industry and of every size, including start-ups, enterprises, and public sector organizations, are running every imaginable use case on AWS. We continually need to deploy newer, innovative, and more efficient and cost effective hardware. Your work will drive efficiency and significant cost savings while improving the performance and reliability of our websites and services. Your work will touch development teams and customers around the world.You will demonstrate a working knowledge of mechanical and thermal systems, with experience in systems integration of complex server products. You’ll have the desire to learn from new challenges and the problem solving and communication skills to work within a highly interactive and experienced team. Candidates must show a hands-on passion for their work and be able to communicate their ideas and concepts both verbally, and visually. Candidates must demonstrate an ability to integrate feedback and to respond quickly to changing contexts and work environments.Key job responsibilitiesIn this role, you will:* Perform mechanical design and development for complex electronic systems* Design and validate systems and subsystems to meet program objectives* Participate in the cross-discipline design process working with other HW and SW team members to develop optimized integrated solutions* Conduct failure analysis and solution validation for product development and fleet systems* Manage interaction with overseas resources* Provide mentorship and technical reviews to a team of mechanical/thermal design engineersA day in the lifeThe average week is a mixture of using engineering tools (CAD and thermal simulation), data analysis, meetings (internal and vendors), test report reviews, design reviews, and communicating via tickets or emails to make design and project decisions.About the teamThe Hardware Engineering Mechanical/Thermal/Robotics (MTR) Engineering team owns the thermal and mechanical hardware designs of AWS servers and server racks and drives Operational Excellence end-to-end related to thermal and mechanical issues.BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures- Experience in server technologies such as, thermal, mechanical, power, and signal integrity- Experience in compute and storage server architecture and design for large scale applications- 7+ years experience in mechanical design for server technologies or Data Center applications ...

Amazon Devices is an inventive research and development company that designs and engineer high-profile devices like the Kindle family of products, Fire Tablets, Fire TV, Health Wellness, Amazon Echo & Astro products. This is an exciting opportunity to join Amazon in developing state-of-the-art techniques that bring Gen AI on edge for our consumer products. We are looking for exceptional scientists to join our Applied Science team and help develop the next generation of edge models, and optimize them while doing co-designed with custom ML HW based on a revolutionary architecture. Work hard. Have Fun. Make History. Key job responsibilitiesWhat will you do?- Quantize, prune, distill, finetune Gen AI models to optimize for edge platforms- Fundamentally understand Amazon’s underlying Neural Edge Engine to invent optimization techniques - Analyze deep learning workloads and provide guidance to map them to Amazon’s Neural Edge Engine- Use first principles of Information Theory, Scientific Computing, Deep Learning Theory, Non Equilibrium Thermodynamics - Train custom Gen AI models that beat SOTA and paves path for developing production models- Collaborate closely with compiler engineers, fellow Applied Scientists, Hardware Architects and product teams to build the best ML-centric solutions for our devices- Publish in open source and present on Amazon's behalf at key ML conferences - NeurIPS, ICLR, MLSys.BASIC QUALIFICATIONS- 3+ years of building machine learning models for business application experience- PhD, or Master's degree and 6+ years of applied research experience- Experience programming in Java, C++, Python or related language- Experience with neural deep learning methods and machine learning ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.The Kuiper Government Solutions team is a multi-disciplinary technology team involved in developing and delivering targeted and scalable solutions for custom satellite and ground applications. The Solutions Engineering team works closely with the core Kuiper team, and addresses the needs of specific customers (such as government agencies). The Senior RF/Microwave Engineer will play a pivotal role in the team delivering innovative and fast-paced analysis and design solutions. The Senior RF/Microwave Engineer will be a member of the Solutions Engineering team, focusing on satellite system level analysis and the design of the various RF and Microwave circuit blocks in the range of Ka/K bands. They will be expected to lead a variety of tasks, from RF board design and component selection, to layout review and board bring-up and test. They will work across teams and support fellow engineers with design reviews and the preparation of joint reports and proposals. The candidate will have a sharp focus on the specific needs of the customer and be able to conduct trades and analyses to show that proposed solutions will meet the customer’s goals.The successful candidate will have demonstrated experience working on complex programs with a diverse set of talented individuals, as well as with partner organizations (including government agencies). The candidate will exhibit the potential to lead small sub-teams of RF/Microwave engineers, and be able to prepare easy-to-read and technically compelling written reports.Key job responsibilities- Interact directly with customers to understand technical requirements, and translate them into technically robust solutions backed by data and analysis- Responsible for implementation of RF wireless system and physical layer performance of multiple wireless components- Responsible for designing RF and communications payloads on a commercial bus and terrestrial ground terminals - Identify top level customer requirements and ensure high quality and innovative designs are pursued- Develop RF link budget, frequency planning, filter requirements definition, and RF test validation plans- Perform RF design and layout trade studies for satellite RF and Microwave sub-systems in the Ka/K range; contributing to overall system architecture including inputs and requirements from cross discipline teams (Mechanical, Electrical, Mechanisms, Materials, Manufacturing, Assembly, and Test)- Facilitate cost trades on multiple parallel configurations for cost/manufacturability vs design uncertainty- Deliver well-written documentation, reports, and presentations for technical design reviews and as part of proposal efforts- Design and support test campaigns, both development and qualification/acceptance, for space hardware- Utilize RF analysis tools including ADS, HFSS, MO, and SystemVueThe role is located in Northridge, CA, and includes US relocation benefits.Security Clearance: This position requires that the candidate selected be a US Citizen and candidates must be able to obtain and maintain a US Government security clearance of TS/SCI.About the teamKuiper Government Solutions is a multi-disciplinary technology team established to rapidly address the needs of targeted customers with specific solutions that have the potential to scale. BASIC QUALIFICATIONS- Experience in developing functional specifications, design verification plans and functional test procedures ...

The Amazon Web Services (AWS) Center for Quantum Computing in Pasadena, CA, is looking to hire a Network Development Engineer in the Quantum Infrastructure and Production group. We are seeking a motivated candidate who can who can design new network architectures, configure physical network hardware, and secure networking technology stack. As a network development engineer in our organization you are expected to communicate across multiple stakeholders including scientists, engineers, organizational partners, external vendors, and leadership. You are also expected to troubleshoot on-premise and remote infrastructure, automate the monitoring of prototype and production systems, and serve in a customer facing support role for our internal service team. On this team you will wear many hats, work smart, and iterate quickly. Successful applicants will have strong written and verbal communication skills, a track record of successfully delivering complex network projects with ambitious timelines, and experience working with local and cross-region environments. Key job responsibilities• Deploy, automate, and scale network infrastructure across new and existing mission critical environments• Develop proposals and influence without authority to align business and technical stakeholders on approach• Identify and troubleshoot recurring networking, routing, and platform issues towards resolution while engaging with mid and senior-level engineering teams• Create and review documentation and processes for new builds, standard operating procedures, strategic planning, etc.• Identify and deliver on opportunities to automate repeatable networking tasks by creating and maintaining scripts or toolsA day in the lifeAs a Network Engineer as Amazon, your core job responsibility is to design network topologies, architectures, and services that solve for many requirements. The primary area of responsibility you will have is to design ahead of customer or technology needs, always predicting and solving for problems that have not yet occurred. This takes the form of creating and defending high-level design documents, working with vendors or internal stakeholders to influence technology roadmaps, constructing and testing your solutions, and providing support to deploy and operate these designs.About the teamAbout AWSDiverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. Why AWS?Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. This team is part of AWS Utility Computing: Utility Computing (UC) AWS Utility Computing (UC) provides product innovations — from foundational services such as Amazon’s Simple Storage Service (S3) and Amazon Elastic Compute Cloud (EC2), to consistently released new product innovations that continue to set AWS’s services and features apart in the industry. As a member of the UC organization, you’ll support the development and management of Compute, Database, Storage, Internet of Things (Iot), Platform, and Productivity Apps services in AWS, including support for customers who require specialized security solutions for their cloud services.BASIC QUALIFICATIONS- 4+ years of major internet routing protocols experience- 4+ years of working in a Linux/Unix environment experience- 1+ years of automation scripting using Python, Bash, Shell and/or Perl experience- CCNA or CompTIA Network+ certified. ...

Project Kuiper is an initiative to increase global broadband access through a constellation of 3,236 satellites in low Earth orbit (LEO). Its mission is to bring fast, affordable broadband to unserved and underserved communities around the world. Project Kuiper will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.Key job responsibilitiesWe are looking for a Sr. Supplier Quality Engineer (ASIC) who will define requirements and deploy processes to deliver aerospace quality at unprecedented scale.The ideal candidate is a systems thinker with excellent analytical abilities, technical skills, effective written and verbal communication, and most importantly, a passion for developing foundry and outsourced assembly and test (OSAT) suppliers to produce high-quality, mission-critical hardware in volume production.Key job responsibilities- Own quality performance of OSAT and foundry suppliers including requirements definition, qualification, production process validation, failure analysis, metrics reporting, and continuous improvement- Define and scale Kuiper’s quality system to ensure early detection of process excursions improving product reliability and wafer yields in volume manufacturing- Test and inspection processes and foundry process controls- Create closed-loop mechanisms utilizing OSAT data to improve foundry processes resulting in quality, reliability and yield gains- Set and monitor OQC/IQC criteria across Kuiper’s ASIC supply chain- 2nd source qualifications- Own systems, tools, and business processes used to manage device traceability and key quality/test metrics- Represent Kuiper Supplier Quality in cross-functional initiatives- Travel as needed to accomplish program objectives- AS9100D Lead Auditor Trained/Certified- Direct experience deploying APQP/PPAP methodologies per AS9145 or equivalent standardsExport Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.A day in the life- Collaborates with product development teams as owner of ASIC quality system requirements- Acts with internal customer obsession on behalf of Kuiper Production by improving reliability, reducing defect rates and driving failure analysis- Serves as the face of Quality for ASIC foundry, OSAT and component suppliers communicating expectations and resolving issues- Facilitates ASIC quality as subject matter expert in device traceability and statistical process control- Leads resolution of quality events utilizing structured failure analysis toolsAbout the teamThe Kuiper Supplier Quality team is driven to develop a vendor base capable of scaling aerospace quality to new volume and cost levels in order to meet end customer needs. This position will join the team at an exciting moment with the opportunity to own quality for key categories and contribute to the design of requirements and systems used across the business. We value data driven decision making, a comfort with ambiguity across multiple simultaneous projects, an ability to earn the trust of our key stakeholders, and delivering results without sacrificing integrity.BASIC QUALIFICATIONS- BS or MS degree in electrical engineering, materials science and engineering, applied physics or related fields.- 7+ years of experience in ASIC quality, manufacturing, testing or failure analysis.- Knowledge and experience in statistics fundamentals and data analysis tools. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Come work at Amazon!As a Payload Integration and Test Network Engineer, you will be responsible for the Kuiper system data-path/network verification, support the implementation and validation sign-off of various software interface requirements and modem architectures. You will be working in a collaborative environment with a multi-disciplinary team and 3rd party partners from development to productization of various Kuiper products.Responsibilities Conceptualize and execute a test campaign with specific focus on network functionality and performance. Engage with systems, hardware, and software development engineeringteams to accomplish the following in pursuit of network integration and testing: capture requirements, define use cases, work backwards from product strategy. End to end network, data and control plane testing to include ground ,satellite and customer terminals. Troubleshoot deeply: anticipate failures, collect data, analyze log files, compare models to observed behavior, root cause. Troubleshoot and root cause throughput degradation and packet losses across the system. Support and reproduce on orbit networking and data plane issues in the lab. Utilize AWS cloud resources as well as commercial-off-the-shelf test equipment: program, instrument, and automate. Draft and maintain high quality documentation for program-level feedback: test verification matrix, status tracking, test runs for record. Enhance testing efficiency by automating test execution and analysis. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumBASIC QUALIFICATIONS- Bachelor's degree in electrical engineering, computer engineering, computer science or equivalent experience- 5+ years of Internet Protocols networking experience- 3+ years of experience with satellite and/or cellular network testing ...

Amazon Web Services (AWS) Hardware Engineering is a fast growing and leading-edge research and development team that creates enterprise compute and storage server designs for our innovative web service and e-commerce technology platforms. Our designs are industry-leading in terms of performance, frugality and operational excellence, and are critical to the success of the AWS business and the hundreds of thousands of customers who use utility computing today. We are seeking an experienced Sr. Technical Program Manager (TPM) to define and build the next generation of our cloud platforms. Our success depends on our innovative server infrastructure; we’re handling massive scale and rapid integration of emergent technologies.The ideal TPM candidate will be an experienced program manager who is skilled in managing server hardware product development teams across several geographic regions using a variety of suppliers (CM, ODM/IHV). The successful candidate will be an innovative self-starter and leader. The candidate will be familiar with the cloud computing industry and AWS offerings and will be passionate about providing the best possible customer experience at the best cost. The candidate will have an obsession with data and precise analysis and will use these as inputs to make decisions.What you will do: As a TPM on the Server Hardware Engineering team you will be responsible for leading multiple simultaneous hardware product development programs in a highly cross-functional environment which includes internal customers, external vendors and technology partners. You’ll provide leadership in the application of new technologies to large scale server deployments in a continuous effort to deliver a world-class customer experience at a world-class cost point. This is a fast-paced challenging position, and you’ll work with thought leaders in multiple technology areas including firmware and application software solutions. You’ll have high standards for yourself and everyone you work with, and you’ll be constantly looking for ways to improve your product’s performance, quality and cost. Using data and key metrics, you will also drive and measure process improvements that enhance our operational effectiveness. You will work independently in a dynamic, challenging, and fast-changing organization. We’re changing an industry, and we need builders who are ready for this challenge and who want to reach beyond what is possible today.Why it matters: Amazon has thousands of unique services, both big and small that power the Retail website (Amazon.com), Amazon Web Services, Kindle, Amazon Instant Video and more. These services run on hardware around the world. We continually need to deploy newer, innovative, and more efficient and cost effective hardware. Your work will drive efficiency and significant cost savings while improving the performance and reliability of our websites and services. Your work will touch development teams and customers around the world.Why you will love it: You will have exposure to teams and leaders across the entire company. You will be a part of a leading edge research and development team. You will see many aspects of the Amazon business. You will have a direct impact on our bottom line and the ability to improve things for our developers. You will be part of a growing, fast paced, and fun team. You will have ownership and responsibility for defining and executing processes that deliver both savings and productivity for Amazon.AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.About the teamAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Amazon Web Services (AWS) values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.BASIC QUALIFICATIONS- 5+ years of technical product or program management experience- 7+ years of working directly with engineering teams experience- 3+ years of software development experience- 5+ years of technical program management working directly with software engineering teams experience- Experience managing programs across cross functional teams, building processes and coordinating release schedules ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.Have you ever wanted to become involved in the global development and rollout of satellite earth stations for a high-performance satellite constellation? We are looking for a hands-on and experienced Satellite Communications ground integration and test engineer to join Project Kuiper's ground systems team. You be a team contributor in the rollout, integration, test, and troubleshooting of the Kuiper Ground Gateway systems. The role will support the development, scale, and execution of our highly efficient Ground Gateway build strategy. Kuiper ground gateway are deployed to enable our low-latency, high-speed broadband satellite communication constellation allowing Amazon to serve un-served and under-served communities around the world.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylumKey job responsibilitiesIn this role you will:- Become a key member of the Ground Systems Integration and test team working directly with our site build teams.- Support development, integration, and ongoing build operations of ground gateway antenna and terminal test systems, both fielded and in build.- Work closely with implementation teams to troubleshoot issues, perform data driven analysis of results, and make recommendations for improvements and corrective actions.- Support the rest of the Ground Systems team along with our suppliers in the identification and execution of design corrective actions improve site build defects and improve site built automation efforts- Aid in the development of optimized field deployment integration and operational readiness test programs - Aid in the development of automated tests that further improve in site build defect discovery and correction enabling deployment of Kuiper’s innovative Ground Gateway System- Communicate regularly on status, risk, and change control.- Help teams reduce exposure to classic failure modes.A day in the lifeAs a Integration and Test Engineer, you will support execution of Kuiper’s ground integration and site build test activities. You will become a subject expert on the Kuiper ground system design and will be called upon frequently as such to support critical troubleshooting activities. You will help develop and will work extensively with the Gateway terminal test systems to validate supplier product updates relative to site deployment and troubleshoot system issues.About the teamThe Ground Systems team is responsible for the architecture, design, build, and installation of Kuiper’s Ground and TT&C Gateways. Our Ground Gateways enable high data rate, low latency communications between Kuiper points of presence and our Low Earth Orbit Satellite constellation. The team works closely with Ground Infrastructure Services, Networks, Regulatory, Payload Test, and RF Systems teams to ensure Kuiper provides a seamless customer experience.BASIC QUALIFICATIONS- 4+ years in integration and test and/or product verification and validation roles- 1+ years using RF and Network test equipment associated with SATCOM communications- 1+ years in development and deployment of automated tests- Bachelor's degree in Engineering or equivalent experience-education ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart team of doers who work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers’ experiences. We invent new improvements every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling, and fun. Amazon Robotics empowers a smarter, faster, more consistent customer experience through automation. Amazon Robotics automates fulfillment center operations using various methods of robotic technology including autonomous mobile robots, sophisticated control software, language perception, power management, computer vision, depth sensing, machine learning, object recognition, and semantic understanding of commands. Amazon Robotics has a dedicated focus on research and development to continuously explore new opportunities to extend its product lines into new areas. This role is a 6 month co-op to join AR full time (40 hours/week) from July/August- December 2025. This Amazon Robotics Intern opportunity will be based either out of the Greater Boston Area in our two state-of-the-art facilities in Westborough, MA and North Reading, MA. Both campuses provide a unique opportunity to have direct access to robotics testing labs and manufacturing facilities.The Advanced Product Quality Engineering (APQE) organization is seeking a talented and motivated Product Quality Engineer Intern with a desire to work with a portfolio of ground-breaking advanced technologies and interface with complex and state-of-the-art manufacturing environments. You will be responsible for working with cross functional technical teams to solve problems and deploy product improvements. You will actively work with hardware, production, and external vendors to achieve the highest quality products at the lowest cost. This is an exciting opportunity to join a talented team, work on leading edge robotic and advanced technology solutions, and drive improvements and effectiveness of operations while building your career for future opportunities.Key job responsibilitiesThe Product Quality Engineer Intern will be responsible for:* Partner with stakeholders in requirements development for new product development.* Identify continuous improvement opportunities and drive team continuous improvement initiatives.* Quality defect evaluation and internal escalation/coordination. * Assist in failure analysis.* Assist in internal quality investigations and CAPAs.* Supplier development and communication to reduce defects.* Work with field quality and maintenance engineering to triage issues.* Present findings to leadership and at Quarterly Business Reviews.* Assist in data collection and visualization.BASIC QUALIFICATIONS- Data analysis skillset and experience in using visualization tools such as Tableau- Previous experience with databases, SQL and/or scripting language(s)- Understanding of metrics, process capabilities, LEAN, databases, data collection and mining- Currently enrolled in a Bachelor’s or Master’s degree in Electrical, Mechanical, Computer, Manufacturing, Quality Engineering or related education- Currently enrolled in College/University and must have at least one semester/term/quarter of school left to complete after the end of the internship- May 2026 graduation date or later- Must be eligible and available for a full-time (40h / week) 5-6 month co-op from July/August- December 2025 ...

Are you inspired by invention? Is problem solving through teamwork in your DNA? Do you like the idea of seeing how your work impacts the bigger picture? Answer yes to any of these and you’ll fit right in here at Amazon Robotics. We are a smart team of doers that work passionately to apply cutting edge advances in robotics and software to solve real-world challenges that will transform our customers’ experiences in ways we can’t even image yet. We invent new improvements every day. We are Amazon Robotics and we will give you the tools and support you need to invent with us in ways that are rewarding, fulfilling and fun. Job Overview – As an Amazon Robotics mechanical engineer, you will develop innovative system architectures and hardware designs for our robotic systems. The ideal candidate has experience designing and analyzing mechanical systems, enjoys analytical problem solving and possesses practical knowledge of high volume manufacturing methods; such as, stamping, extrusion, casting, and injection molding. This position reports directly to the Mechanical Engineering Manager. Key job responsibilities - Working with an interdisciplinary team to execute product designs from concept to production including specification, design, prototyping, validation and testing - Working with the Operations, Manufacturing, Supply Chain and Quality organizations as well as vendors to ensure a smooth product launch - Writing functional specifications, design verification plans, and functional test procedures - Exhibit role model behaviors of thorough engineering analysis and cradle to grave ownership - Design and adaptation of holistic hardware solutions for ambiguous problems with fluid requirements.A day in the lifeAmazon offers a full range of benefits that support you and eligible family members, including domestic partners and their children. Benefits can vary by location, the number of regularly scheduled hours you work, length of employment, and job status such as seasonal or temporary employment. The benefits that generally apply to regular, full-time employees include: 1. Medical, Dental, and Vision Coverage 2. Maternity and Parental Leave Options 3. Paid Time Off (PTO) 4. 401(k) Plan If you are not sure that every qualification on the list above describes you exactly, we'd still love to hear from you! At Amazon, we value people with unique backgrounds, experiences, and skillsets. If you’re passionate about this role and want to make an impact on a global scale, please apply!BASIC QUALIFICATIONS- BS in Mechanical Engineering- SolidWorks or similar CAD experience and understanding of best practices for part design, advanced assemblies, complex configuration management- Hands on experience crafting proof-of-concept models and prototypes- Thorough understanding and use of principals, theories and concepts in mechanical engineering and ability to apply them to product design- Organizational skills and the ability to work well with teams- Experience communicating concepts and writing technical documents- Experience working in a fast-paced agile environment- Experience with full lifecycle and proficiency at completing tasks to meet associated milestones- Experience evaluating design, performance and logistical tradeoffs for hardware systems ...

Come work at Amazon! Innovation is part of our DNA! Our goal is to be Earth's most customer centric company, and we are just getting started. We seek professionals who are eager to join an ambitious project that continues to push the state of the art in satellite system design, verification test, and operations. Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.We are looking for an electrical test engineer who combines superb technical capabilities with a demonstrated ability to get the right things done quickly and effectively. You will work with a team of top-notch engineers and will collaborate with multiple spacecraft design, test, and operations teams. You should be comfortable with a high degree of ambiguity and relish the idea of solving problems that haven't been solved at scale before. Along the way, we guarantee that you will learn a lot, have fun, and make a positive impact on tens of millions of people. Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.Key job responsibilities• Work with key stakeholders across hardware and software development teams to define test strategy and requirements.• Define electrical component and subsystem test plans as needed to ensure robust electrical designs for space applications.• Lead the planning and execution of design verification test, qualification, reliability, and production test campaigns for avionics subsystems.• Support the various aspects of the test engineering team through test system architecture, equipment selection, PCB design, harness design, test system build and integration, and test system commissioning and delivery to customers.• Lead test system design reviews, test plan reviews, test readiness reviews, and test results reviews.• Partner with cross-functional teams including electrical engineering, RF engineering, mechanical engineering, software, reliability, manufacturing, program management, etc.A day in the lifeAs part of the Avionics Test Engineering team, you will develop and deliver test systems for avionics subsystems for both development and production test. You will be responsible for development test campaigns, which include board level electrical design verification test, LRU qualification test, and reliability test.About the teamOur team designs and delivers the test systems that enable qualifying and acceptance testing the hardware subsystems for the flight computer, power delivery, and RF systems on the satellite avionics bus. Our team leads design verification, qualification, and reliability testing for our avionics subsystems.BASIC QUALIFICATIONS- BS degree in Electrical Engineering, Computer Engineering or equivalent.- Experience with lab equipment like spectrum analyzers, signal generators, electronic loads, power supplies, network analyzers, high-speed oscilloscopes, etc.- 5+ years testing with SoCs, DRAMs, FPGAs, multi-gigabit interfaces, power converters, sensors, operational amplifiers, and ADCs/DACs,.- Experience with schematic and layout ECAD tools.- Experience with complex board designs, including high-speed interconnects, high-reliability designs, avionics, vehicle control systems, and/or motor & actuator control electronics.- Experience with debugging designs with microprocessors, FPGAs, power supplies, and sensors. ...

Project Kuiper is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.As a Sr. DSP Modem Embedded Software Design Engineer, you will participate in all phases of DSP physical layer software development from requirements through implementation and test to operations. Our team tackles all of the layer 1 tasks on the satellite system.Key Responsibilities:- Develop embedded software in assembly, C, and C++ in a real-time operating system environment for broadband satellite modem systems.- Write real-time critical software to augment and interact with hardware blocks such as FFT, correlator, codec, DPD, etc.- Write device drivers and system applications for satellite broadband link management.- Work closely with ASIC design, Verification and MAC systems and software teams to support board bring-up, integration, and testing.Export Control Requirement:Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.BASIC QUALIFICATIONS- MS degree in Computer Science or Electrical Engineering or similar.- 7+ years of non-internship professional embedded software development with real time constraint experience including code development methodologies, debugging, version control, and code maintenance.- 7+ years with Signal processing (Audio/video), Communication or AI chips. ...

Amazon Web Services (AWS) internships are full-time (40 hours/week) for 12 consecutive weeks during summer. By applying to this position, your application will be considered for all locations we hire for in the United States.In Annapurna Labs we are at the forefront of hardware co-design not just in Amazon Web Services (AWS) but across the industry. The work we do is cutting-edge and internet-scale while also being deeply important to our customers. We design and build every component of our hardware and software to come together into products that our customers use for accelerated computing: either Machine Learning acceleration, or FPGA acceleration. We get our hands dirty, from creating our own silicon, pushing the electrons in the right direction, ensuring our hardware is functional and healthy, and managing the full lifecycle of our systems at the huge scale and complexity of AWS. If you're interested in "building a complete product" from inception to delighted customers, Annapurna is a fantastic choice.AWS-Annapurna team develops the silicon used in our most advanced machine learning accelerator servers at cutting edge process nodes. These SOCs are used in massively scaled server clusters to provide best hardware platform for our customers to run training and inference workloads. Machine learning operations product development engineering team focuses on optimizing key manufacturing metrics like yield, test cost and test coverage for our products across ATE test and System test insertions. We are also responsible for thorough power/performance characterization of our newest silicon with a goal of optimizing system power/performance with adaptive scaling schemes and improving foundry process. Our final product is a server, not just the silicon, so you will find yourself stretching beyond traditional silicon product engineering boundaries working to resolve both silicon and system related manufacturing issues, providing ample opportunities to learn. Key job responsibilities* Work on improving our manufacturing data analysis and reporting systems to generate analysis which provide actionable information to improve key manufacturing metrics like yield, cost and coverage. * Write python scripts, generate dashboards to automate analysis and generate alerts for team to review. * Collaborate with ATE test, Foundry engineering and System validation teams to learn more about these test insertions and deep dive into manufacturing issues while supporting debug and root cause activities.* Develop a good understanding of various ATE and System test coverage and work on activities to collect and analyze performance and power metrics on the latest and greatest workloads. BASIC QUALIFICATIONS- Enrolled in a Bachelors’ degree program or higher in Electrical Engineering, Computer Engineering, or a related field with a graduation conferral date between December 2025 and September 2026- Project OR internship experience with data analysis and automation using scripting languages like Python.- Coursework or familiarity with basic semiconductor design process and manufacturing concepts. ...